A Course on Damage Mechanics
From MaRDI portal
Cited in
(only showing first 100 items - show all)- On perforation of ductile metallic plates by blunt rigid projectile
- Critical defect size distributions in concrete structures detected by the acoustic emission technique
- Multi-scale boundary element modelling of material degradation and fracture
- A finite elastic-viscoelastic-elastoplastic material law with damage: theoretical and numerical aspects.
- Constitutive modeling of aluminum foam including fracture and statistical variation of density
- Superimposed finite elastic-viscoelastic-plastoelastic stress response with damage in filled rubbery polymers. Experiments, modelling and algorithmic implementation
- A dispersive multi-scale crack model for quasi-brittle heterogeneous materials under impact loading
- A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement
- A regularized orthotropic continuum damage model for layered composites: intralaminar damage progression and delamination
- Unified constitutive modeling of rubber-like materials under diverse loading conditions
- Bounds on the effect of progressive structural degradation
- A multi-temporal scale model reduction approach for the computation of fatigue damage
- Phase-field modeling of fatigue coupled to cyclic plasticity in an energetic formulation
- A thermodynamically consistent fractional visco-elasto-plastic model with memory-dependent damage for anomalous materials
- A computational multi-scale model for the stiffness degradation of short-fiber reinforced plastics subjected to fatigue loading
- Coupled thermodynamically consistent thermo-mechanical model of silica glass subjected to hypervelocity impact
- A general phase-field model for fatigue failure in brittle and ductile solids
- A multiscale high-cycle fatigue-damage model for the stiffness degradation of fiber-reinforced materials based on a mixed variational framework
- A consistent algorithm for finite-strain visco-hyperelasticity and visco-plasticity of amorphous polymers
- Modeling of deformation of solids with material damage
- A variational framework for the thermomechanics of gradient-extended dissipative solids -- with applications to diffusion, damage and plasticity
- A micromechanical finite element model for predicting the fatigue life of heterogenous adhesives
- Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: numerical calibration and experimental validation
- Weakly intrusive time homogenization technique to deal with pseudo-cyclic coupled thermomechanical problems with uncertainties
- Non-linear anisotropic damage rheology model: theory and experimental verification
- On the cavity detection in a heat conductive medium from time-average boundary temperature measurement
- A phase-field crack model based on a directional strain decomposition and a stress-driven crack-opening indicator
- Variational updates for general thermo-chemo-mechanical processes of inelastic solids
- A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials
- Analytical solution to the 1D Lemaitre's isotropic damage model and plane stress projected implicit integration procedure
- Numerical simulation of cyclic behavior of a ductile metal with a coupled damage-plasticity model with several damage deactivation paths
- Phase-field analysis of finite-strain plates and shells including element subdivision
- Computational shape optimisation for a gradient-enhanced continuum damage model
- A phase-field approach embedded in the theory of porous media for the description of dynamic hydraulic fracturing
- Coupled ductile-hydrolytic damage model based on variational constitutive updates
- On the implementation of finite deformation gradient-enhanced damage models
- A kinetic two-scale damage model for high-cycle fatigue simulation using multi-temporal Latin framework
- A viscoelastic viscoplastic constitutive model including mechanical degradation: uniaxial transient finite element formulation at finite strains and application to space truss structures
- Phase-field modeling of ductile fracture
- An energy gap functional: cavity identification in linear elasticity
- Element-wise algorithm for modeling ductile fracture with the Rousselier yield function
- A micro-macro approach to rubber-like materials. III: The micro-sphere model of anisotropic Mullins-type damage
- Damage modelling in metal forming problems using an implicit non-local gradient model
- An analysis of the delamination of an environmental protection coating under cyclic heat loads
- A multi-temporal scale approach to high cycle fatigue simulation
- On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials
- A viscoelastic damage model for polycrystalline ice, inspired by Weibull-distributed fiber bundle models. I: Constitutive models
- A viscoelastic damage model for polycrystalline ice, inspired by Weibull-distributed fiber bundle models. part II: thermodynamics of a rank-4 damage model
- An assessment of the phase field formulation for crack growth
- A large strain gradient-enhanced ductile damage model: finite element formulation, experiment and parameter identification
- Numerical analysis of stress-state-dependent damage and failure behavior of ductile steel based on biaxial experiments
- A phase-field model for ductile fracture at finite strains and its experimental verification
- Orientation of fracture in a brittle solid under conventional triaxial compression
- Perfect plasticity with damage and healing at small strains, its modeling, analysis, and computer implementation
- Computational homogenization for multiscale crack modeling. Implementational and computational aspects
- Dynamic crack propagation in elastoplastic thin-walled structures: Modelling and validation
- Influence of objective functions in structural damage identification using refined and simple models
- Numerical treatment of damage propagation in axially compressed composite airframe panels
- Continuum damage mechanics -- modelling and simulation
- Analysis of three-dimensional crack initiation and propagation using the extended finite element method
- Finite element guidelines for simulation of delamination dominated failures in composite materials validated by case studies
- Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions
- Damage-based fracture with electro-magnetic coupling
- Damage driven crack initiation and propagation in ductile metals using XFEM
- Multiscale modeling of impact on heterogeneous viscoelastic solids containing evolving microcracks
- Adaptive superposition of finite element meshes in nonlinear transient solid mechanics problems
- A non-local visco-elastic damage model and dynamic fracturing
- Phenomenological modelling of self-healing polymers based on integrated healing agents
- Multiscale failure modeling of concrete: micromechanical modeling, discontinuous homogenization and parallel computations
- scientific article; zbMATH DE number 1282938 (Why is no real title available?)
- Theoretical Backgrounds of Durability Analysis by Normalized Equivalent Stress Functionals
- An algorithm to simulate surface creation without element deletion or remeshing
- Gradient-enhanced damage modelling of high-cycle fatigue
- Computational methods for fracture in brittle and quasi-brittle solids: state-of-the-art review and future perspectives
- Solution parallelization of softening plasticity problems
- Theory and computation of nonlinear damage accumulation for lifetime prediction
- Stick-slip and wear phenomena at the contact interface between an elastic beam and a rigid substrate
- Well-posedness of a random coefficient damage mechanics model
- Numerical analysis of damage thermo-mechanical models
- Nonlinear active vibration control of piezoelastic laminated plates considering interfacial damage effects
- A framework for large strain elastic-plastic damage mechanics based on metric transformations
- Material characterization based on micro-structural computations and homogenization
- Predictive algorithm for detection of microcracks from macroscale observables
- scientific article; zbMATH DE number 7484361 (Why is no real title available?)
- Maximum accumulated strain for linear two-link triangle-like deformation trajectories
- Macroscopic damage laws based on analysis of microscopic unit cells
- A large strain anisotropic ductile damage model -- effective driving forces and gradient-enhancement of damage vs. plasticity
- Damage preserving transformation for materials with microstructure
- Reducing internal variables and improving efficiency in data-driven modelling of anisotropic damage from RVE simulations
- Parameter identification of a phase-field fracture model using integrated digital image correlation
- Homogenization-based multiscale crack modelling: from micro-diffusive damage to macro-cracks
- Variational sensitivity analysis and shape optimisation applied to a non-local, ductile damage model
- A phase-field model for brittle fracture of anisotropic materials
- A nonlocal computational homogenization of softening quasi-brittle materials
- A three-scale compressible microsphere model for hyperelastic materials
- Modeling impact-induced damage and debonding using level sets in a sharp interface Eulerian framework
- A return mapping algorithm for elastoplastic and ductile damage constitutive equations using the subloading surface method
- Efficient numerical methods for the large-scale, parallel solution of elastoplastic contact problems
- A generalized finite-strain damage model for quasi-incompressible hyperelasticity using hybrid formulation
- Eikonal gradient-enhanced regularization of anisotropic second-order tensorial continuum damage models for quasi-brittle materials
This page was built for publication: A Course on Damage Mechanics
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4888386)
