A minimaxmax problem for improving the torsional stability of rectangular plates
From MaRDI portal
Abstract: We use a gap function in order to compare the torsional performances of different reinforced plates under the action of external forces. Then, we address a shape optimization problem, whose target is to minimize the torsional displacements of the plate: this leads us to set up a minimaxmax problem, which includes a new kind of worst-case optimization. Two kinds of reinforcements are considered: one aims at strengthening the plate, the other aims at weakening the action of the external forces. For both of them, we study the existence of optima within suitable classes of external forces and reinforcements. Our results are complemented with numerical experiments and with a number of open problems and conjectures.
Recommendations
- Publication:3486095
- The optimal problems for torsional rigidity
- Some remarks about a worst-case problem for the torsional response of a plate
- scientific article; zbMATH DE number 3924287
- A sharp minimum principle for the problem of torsionally rigidity
- Stability of a rectangular plate under biaxial tension
- Stability of orthotropic rectangular plates
- On the optimal domain for minimizing the buckling load of a clamped plate
- A numerical method of solving the problem of maximizing the torsional rigidity of a bar
- scientific article; zbMATH DE number 1354698
Cites work
- scientific article; zbMATH DE number 3528170 (Why is no real title available?)
- scientific article; zbMATH DE number 1223565 (Why is no real title available?)
- scientific article; zbMATH DE number 1996419 (Why is no real title available?)
- scientific article; zbMATH DE number 2024202 (Why is no real title available?)
- scientific article; zbMATH DE number 2159262 (Why is no real title available?)
- scientific article; zbMATH DE number 3204363 (Why is no real title available?)
- A Measure of the Torsional Performances of Partially Hinged Rectangular Plates
- A linearized approach to worst-case design in parametric and geometric shape optimization
- A minimaxmax problem for improving the torsional stability of rectangular plates
- A partially hinged rectangular plate as a model for suspension bridges
- Analysis and numerical studies of a problem of shape design
- Hexagonal design for stiffening trusses
- Homogenization of a thin plate reinforced with periodic families of rigid rods
- Lateral excitation of bridges by balancing pedestrians
- Material interpolation schemes in topology optimization
- Mathematical models for suspension bridges. Nonlinear structural instability
- On the variation of longitudinal and torsional frequencies in a partially hinged rectangular plate
- Optimal transportation networks as free Dirichlet for the Monge-Kantorovich problem
- Principal compliance and robust optimal design
- Regularity of the minimizers in the composite membrane problem in \(\mathbb R^2\)
- Structural instability of nonlinear plates modelling suspension bridges: mathematical answers to some long-standing questions
- Variation and optimization of formes. A geometric analysis
- Weak uniqueness and partial regularity for the composite membrane problem
Cited in
(12)- A minimaxmax problem for improving the torsional stability of rectangular plates
- On the first frequency of reinforced partially hinged plates
- INVESTIGATION OF THE INFLUENCE OF AN INTERMEDIATE HINGE SUPPORT IN THE PROBLEM OF BENDING OF AN ELASTICALLY RESTRAINED ORTHOTROPIC BEAM
- Some remarks about a worst-case problem for the torsional response of a plate
- Spectral Optimization of Inhomogeneous Plates
- Maximizing the ratio of eigenvalues of non-homogeneous partially hinged plates
- An orthotropic plate model for decks of suspension bridges
- A positivity preserving property result for the biharmonic operator under partially hinged boundary conditions
- A new detailed explanation of the Tacoma collapse and some optimization problems to improve the stability of suspension bridges
- Some solutions of minimaxmax problems for the torsional displacements of rectangular plates
- Optimization of the Structural Performance of Non-homogeneous Partially Hinged Rectangular Plates
- An optimum reinforcement solution for a torsionless grillage with given minimum strength
This page was built for publication: A minimaxmax problem for improving the torsional stability of rectangular plates
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1637349)
