Code_Aster
From MaRDI portal
Code Aster
Cited in
(71)- Gradient damage models: toward full-scale computations
- The local average contact (LAC) method
- A mixed interface finite element for cohesive zone models
- An accurate local average contact method for nonmatching meshes
- Non-intrusive reduced order modelling for the dynamics of geometrically nonlinear flat structures using three-dimensional finite elements
- A minimization principle for finite strain plasticity: incremental objectivity and immediate implementation
- Direct computation of nonlinear mapping via normal form for reduced-order models of finite element nonlinear structures
- On the frequency response computation of geometrically nonlinear flat structures using reduced-order finite element models
- Development of finite element models for studying the electrical excitation of myocardium
- Analysis, improvement and limits of the multiscale Latin method
- Nonlinear and multiphysics evaluation of residual stresses in coils
- A finite element approach coupling a continuous gradient damage model and a cohesive zone model within the framework of quasi-brittle failure
- An implicit geometrical approach to level sets update for 3D non planar X-FEM crack propagation
- A simplified second-gradient model for dilatant materials: theory and numerical implementation
- Reduced order models for geometrically nonlinear structures: assessment of implicit condensation in comparison with invariant manifold approach
- Theoretical and numerical modeling of the thermomechanical and metallurgical behavior of steel
- On finite element implementation of cyclic elastoplasticity: theory, coding, and exemplary problems
- Numerical simulation of ductile fracture with the Rousselier constitutive law
- Performance of multifiber beam element for seismic analysis of reinforced concrete structures
- Gradient constitutive relations: numerical aspects and application to gradient damage
- Modelling multiple cycles of static and dynamic recrystallisation using a fully implicit isotropic material model based on dislocation density
- Fully coupled poromechanical back analysis of the pulse test by inverse method
- Parametric numerical simulations of TRIP and its interaction with classical plasticity in martensitic transformation
- A finite volume penalty based segment-to-segment method for frictional contact problems
- Three-dimensional improved XFEM (IXFEM) for static crack problems
- A stable 3D contact formulation using X-FEM
- Automatic generation of statistical volume elements using multibody dynamics and an erosion-based homogenization method
- Global-local non intrusive analysis with Robin parameters: application to plastic hardening behavior and crack propagation in 2D and 3D structures
- Nonlinear Cauchy problem and identification in contact mechanics: a solving method based on Bregman-gap
- Strain simulation of steel during a heating-cooling cycle including solid-solid phase change
- Finite volume approximation of a diffusion-dissolution model and application to nuclear waste storage
- A hybrid high-order discretization combined with Nitsche's method for contact and Tresca friction in small strain elasticity
- Model-free data-driven methods in mechanics: material data identification and solvers
- Convergence of a gradient damage model toward a cohesive zone model
- An energy error-based method for the resolution of the Cauchy problem in 3D linear elasticity
- Experimental study of the phase transformation plasticity of 16MND5 low carbon steel induced by proportional and nonproportional biaxial loading paths
- A practical method for the reduction of linear thermo-mechanical dynamic equations
- Local enrichment of NURBS patches using a non-intrusive coupling strategy: geometric details, local refinement, inclusion, fracture
- CalculiX
- MARC
- SIMEM3 Renault
- Code_Saturne
- OOFEM
- PANG
- Salinas
- WARP3D
- Algorithm 949
- clad
- solids4foam
- DEIP
- DiSk++
- HDGlab
- MFront
- Algorithme de contraintes actives et contact unilatéral sans frottement
- Direct and iterative solvers for finite element problems
- An elastic-plastic constitutive law for the description of uniaxial and multiaxial ratchetting
- Hybrid high-order methods for finite deformations of hyperelastic materials
- Alya: computational solid mechanics for supercomputers
- Non-intrusive coupling: recent advances and scalable nonlinear domain decomposition
- About the use of standard integration schemes for X-FEM in solid mechanics plasticity
- A probabilistic nonlocal model for crack initiation and propagation in heterogeneous brittle materials
- Numerical damping of spurious oscillations: a comparison between the bulk viscosity method and the explicit dissipative Tchamwa-Wielgosz scheme
- Shakedown analysis of structures made of materials with temperature-dependent yield stress
- A nine nodes solid-shell finite element with enhanced pinching stress
- A non-invasive implementation of a mixed domain decomposition method for frictional contact problems
- A monolithic energy conserving method to couple heterogeneous time integrators with incompatible time steps in structural dynamics
- A fully non-invasive hybrid IGA/FEM scheme for the analysis of localized non-linear phenomena
- Fast and robust level set update for 3D non-planar X-FEM crack propagation modelling
- The use of ``discrete shear quadrangle for the generation of influence surfaces of internal forces in a plate. Examples of application of the Code\_Aster
- Introducing the open-source \texttt{mfront} code generator: application to mechanical behaviours and material knowledge management within the PLEIADES fuel element modelling platform
- AutoMat
This page was built for software: Code_Aster
