Contact mechanics
This book presents clearly the most thorough documentation to date on the age-old interdisciplinary problem of contact mechanics. It appears as Volume 250 of the book series Solid Mechanics and Its Applications. The series' intent is to enable the readers to answer the questions: ``Why, How, and How much (from the series' description). A thorough contact analysis can include all aspects of solid mechanics as well as the fundamentals of fluid mechanics and the thermal sciences. Heinrich Hertz was the first to write about contact mechanics in a paper published in 1882 [\textit{H. Hertz}, J. Reine Angew. Math. 92, 156--171 (1882; JFM 14.0807.01)]. Consequently, his name is often used as a descriptor of stresses arising from contacting bodies. In the subject volume under review, the author emphasizes the overall behavior of contacting bodies -- as opposed to internal stress and strain details. His analyses are further restricted to linearly elastic bodies. In spite of these analytical constraints, the book spans 585 pages, including 20 chapters, four appendices, and over 380 references -- 32 of which are to the author's own writings. The author provides problems at the end of each chapter. The problems make the book suitable as an advanced mechanics text on contact phenomena. The book has an intensive mathematical style, so the reader should have some knowledge of advanced applied mathematics. Alternatively, the book could be used as a text for topics in advanced engineering mathematics. Even with these somewhat restricted objectives, the book covers many topics, including two- and three-dimensional contact, smooth (frictionless) and rough (with friction) contact, conformed and counterformed contact, symmetric and asymmetric contact, normal and tangential loading, rolling and sliding contact, dynamic contact, thermal effects, and impact. The theme is toward analysis rather than design. Consequently, issues such as fatigue, fracture, and failure are not discussed. Readers will welcome the lucid style and the helpful discussion of topics when they arise. In this reviewer's opinion, the book will probably be of greatest interest to second year graduate students, especially those seeking theses and dissertation topics. The book undoubtedly stimulates additional reading, studying, and research. Hard copy purchase by libraries is recommended.
- Contact mechanics in tribology
- Contact mechanics of a dilatant region located at a compressed elastic interface
- Book review of: J. R. Barber, Contact mechanics
- Contact, adhesion and rupture of elastic solids
- On the indentation of a poroelastic halfspace
- Hertz theory and Carlson elliptic integrals
- Asymmetric propagation of acoustic waves in a conical granular chain
- The applicable range of the Goodman approximation in non-slipping contact of elastic materials with thermoelectric effects
- Contact mechanics for dynamical systems: a comprehensive review
- Exact analysis of the orientation-adjusted adhesive full stick contact of layered structures with the asymmetric bipolar coordinates
- Modeling and inverse identification method for the characterization of elastic-plastic contact behavior during flat punch indentation
- The axisymmetric shrink fit problem subjected to torsion
- Existence and multiplicity of solutions in frictional contact mechanics. I: A simplified criterion
- Evaluation of the incremental compliances of non-elliptical contacts by treating them as external cracks
- Representation of incomplete contact problems by half-planes
- Effect of surface relief on sliding friction of viscoelastic bodies
- Thickness size effect on contact behavior of a thermoelectric strip
- The influence of 2D periodic surface texture on the partial slip problem for elastic bodies
- DP-MPM: domain partitioning material point method for evolving multi-body thermal-mechanical contacts during dynamic fracture and fragmentation
- The axisymmetric frictional receding contact of a layer pressed against a half-space by pressure outside a disk
- Higher-order contact mechanics
- A multi-scale FEM-BEM formulation for contact mechanics between rough surfaces
- Periodic contact problems for a transversally isotropic layer
- Contact between a smooth indenter and a two-layer elastic half-space with complicated conditions on the surface
- Application of the conjugate gradient method to solving discrete contact problems for an elastic half-plane
- Algorithm for solving discrete contact problems for an elastic strip
- On the contact problem for a wavy cylinder and an elastic half-plane
- Algorithm for solving discrete contact problems for an elastic layer
- Special issue: Contact mechanics
- Similarity approach to Hertz type contact problems
- scientific article; zbMATH DE number 987397 (Why is no real title available?)
- Introduction to contact mechanics
- Contact mechanics and friction.
- Contact Mechanics
- Handbook of contact mechanics. Exact solutions of axisymmetric contact problems. Translated from the 2018 German original
- Handbook of contact mechanics. Exact solutions of axisymmetric contact problems
- Contact Mechanics of Wearing out Solids
- Introduction to contact mechanics
- Stress tensor and gradient of hydrostatic pressure in the contact plane of axisymmetric bodies under normal and tangential loading
- Ludwig Föppl and Gerhard Schubert: Unknown classics of contact mechanics
- Mechanics of heterogeneous adhesive contacts
- Analytic contact solutions of the Boussinesq and Cattaneo problems for an ellipsoidal power-law indenter
- On implementing boundary conditions for a rate-form quasi-static contact problem with friction: a node-to-facet finite element approach
- Adhesive sliding with a nominal point contact: postpredictive analysis
- Elastic, flat and rounded finite contacts: when should we use half-plane theory?
- Frictional contact analysis between two-dimensional deformable anisotropic magneto-electro-elastic bodies via a semi-analytical method
- On the depth of cylindrical indentation of an elastic half-space for different types of displacement boundary conditions
- Indentation of a periodically layered, elastic half-space by a rigid sphere
- Application of the conjugate gradient method for solving unilateral discrete contact problems for an elastic half-space
- Construction of the transfer function of the Poincaré-Steklov operator for a coated elastic half-plane
- On the refined boundary condition at the edge of a thin elastic strip supported by a Winkler-type foundation under antiplane shear deformation
- Long-time dynamics of a semilinear beam in a contact problem with pointwise damping
- Some boundary value problems of the theory of consolidation with double porosity
- Numerical shape and topology optimization of regions supporting the boundary conditions of a physical problem
- The third and fourth boundary value problems of consolidation theory with double porosity
- A review of partial slip solutions for elastic contacts
- Algorithm for calculating the transfer function of the Poincaré-Steklov operator for a stratified elastic strip
- Algorithm for solving unilateral discrete contact problems for a multilayer elastic strip
- Point force in a plane in the context of fractional nonlocal elasticity
- Global attractors for the Signorini problem with pointwise damping
- Generalized semi-analytical modeling of three-dimensional contact responses in piezoelectric semiconductors with conductive indenters
- Construction of the transfer function of the Poincaré-Steklov operator for an elastic layer
This page was built for publication: Contact mechanics
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q5915683)