On the numerical integration of interface elements
From MaRDI portal
Cited in
(96)- A finite element model for the analysis of buckling driven delaminations of thin films on rigid substrates
- Crack growth resistance of shape memory alloys by means of a cohesive zone model
- The application of interface elements and enriched or rate-dependent continua to micro-mechanical analyses of fracture in composites
- A discrete formulation for elastic solids with damaging interfaces
- Some aspects of interlaminar degradation in composites
- A weighted Nitsche stabilized method for small-sliding contact on frictional surfaces
- Numerical modelling of large deformation in metal powder forming
- Analysis of interphase mechanical behavior with interface element in the composite materials
- The interphase finite element
- A simple benchmark problem to test frictional contact
- Computational modeling of localized failure in solids: XFEM vs PF-CZM
- A posteriori performance-based comparison of three new path-following constraints for damage analysis of quasi-brittle materials
- A stabilized finite element method for enforcing stiff anisotropic cohesive laws using interface elements
- Discrete inclusion models for reinforced composites: comparative performance analysis and modeling challenges
- A cohesive zone model which is energetically equivalent to a gradient-enhanced coupled damage-plasticity model
- Chemo-mechanical model for degradation of oil paintings by amorphous and crystalline metal soaps
- Computational modelling of the basic creep of concrete: an image-based meso-scale approach
- Phase-field fracture incorporating cohesive adhesion failure mechanisms within the representative crack element framework
- Simulation of crack propagation through voxel-based, heterogeneous structures based on eigenerosion and finite cells
- Configurational-force interface model for brittle fracture propagation
- A multiscale modeling of CNT-reinforced cement composites
- Variational approach to interface element modeling of brittle fracture propagation
- A weak penalty formulation remedying traction oscillations in interface elements
- Interface material failure modeled by the extended finite-element method and level sets
- A three-scale domain decomposition method for the 3D analysis of debonding in laminates
- Node-to-segment and node-to-surface interface finite elements for fracture mechanics
- Modern domain-based discretization methods for damage and fracture
- An ALE formulation for implicit time integration of quasi-steady-state wear problems
- A coupled cohesive zone model for transient analysis of thermoelastic interface debonding
- A three-dimensional computational framework for impact fracture analysis of automotive laminated glass
- A mixed interface finite element for cohesive zone models
- Fundamentals of electro-mechanically coupled cohesive zone formulations for electrical conductors
- Some observations on the enforcement of constraint equations in the EFG method
- A new method for modelling cohesive cracks using finite elements
- An isogeometric approach to cohesive zone modeling
- Computational homogenization for multiscale crack modeling. Implementational and computational aspects
- Numerical methods for The Modelling Of Debonding In Composites
- The bipenalty method for arbitrary multipoint constraints
- An isogeometric analysis Bézier interface element for mechanical and poromechanical fracture problems
- Optimal penalty stiffness values of concurrent 2D elastic interface elements leading to accurate stress tractions
- Analysis of the integration of cohesive elements in regard to utilization of coarse mesh in laminated composite materials
- Propagation of delamination in composite materials with isogeometric continuum shell elements
- On the numerical integration of isogeometric interface elements
- Mixed-mode delamination in 2D layered beam finite elements
- Computational modelling of microcracking effects in polycrystalline piezoelectric ceramics
- Numerical treatment of damage propagation in axially compressed composite airframe panels
- A nonlinear interface element for 3D mesoscale analysis of brick-masonry structures
- Partition of unity-based discontinuous elements for interface phenomena: computational issues
- Finite element guidelines for simulation of delamination dominated failures in composite materials validated by case studies
- Modelling interfacial cracking with non-matching cohesive interface elements
- A two-field modified Lagrangian formulation for robust simulations of extrinsic cohesive zone models
- A dissipation-based arc-length method for robust simulation of brittle and ductile failure
- scientific article; zbMATH DE number 1210717 (Why is no real title available?)
- Interface element including point‐to‐surface constraints for three‐dimensional problems with damage propagation
- Mesoscopic modelling of masonry using weak and strong discontinuities
- A hybrid discontinuous Galerkin/interface method for the computational modelling of failure
- A consistent geometrically non-linear approach for delamination
- A consistent interface element formulation for geometrical and material nonlinearities
- Progressive delamination analysis of composite materials using XFEM and a discrete damage zone model
- Mesolevel modeling of failure in composite laminates: constitutive, kinematic and algorithmic aspects
- The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints
- Numerical integration of on-the-fly-computed enrichment functions in the PUM
- A time‐based arc‐length like method to remove step size effects during fracture propagation
- A comparative analysis of continuum plasticity, viscoplasticity and phase-field models for earthquake sequence modeling
- An extended finite element method with polygonal enrichment shape functions for crack propagation and stiff interfaceproblems
- Extended isogeometric analysis of a progressively fracturing fluid‐saturated porous medium
- A phase field-based framework for electro-chemo-mechanical fracture: crack-contained electrolytes, chemical reactions and stabilisation
- An image-based meso-scale model for the hygro-mechanical time-dependent analysis of concrete
- Bridging proper orthogonal decomposition methods and augmented Newton-Krylov algorithms: an adaptive model order reduction for highly nonlinear mechanical problems
- A two-scale extended finite element method for modelling 3D crack growth with interfacial contact
- A corotational hybrid-Trefftz stress formulation for modelling cohesive cracks
- A convergence study of monolithic simulations of flow and deformation in fractured poroelastic media
- Locking-free interface failure modeling by a cohesive discontinuous Galerkin method for matching and nonmatching meshes
- Displacement-based and hybrid formulations of zero-thickness mortar/interface elements for unmatched meshes, with application to fracture mechanics
- Frictional interactions for non-localized beam-to-beam and beam-inside-beam contact
- Extended isogeometric analysis for cohesive fracture
- X-IGALME: isogeometric analysis extended with local maximum entropy for fracture analysis
- Stabilization of the extended finite element method for stiff embedded interfaces and inclusions
- Discrete fracture analysis using locally refined T-splines
- Phase-field modelling of cohesive interface failure
- Adaptive hierarchical refinement of NURBS in cohesive fracture analysis
- Delamination growth in composite laminates of variable stiffness
- Isogeometric analysis of fluid-saturated porous media including flow in the cracks
- On the robustness of the stabilized finite element method for delamination analysis of composites using cohesive elements
- An extended isogeometric collocation method for fracture analysis
- Towards a generalization of a discrete strong discontinuity approach
- Third medium finite element contact formulation for pneumatically actuated systems
- Buckling and post-buckling analysis of masonry walls using virtual elements and cohesive interfaces
- A consistent phase-field-regularised partition of unity method for fracture analysis
- Reliability-based optimization of maintenance scheduling of mechanical components under fatigue
- Interface damage model for thermomechanical degradation of heterogeneous materials
- A modelling framework for coupled hydrogen diffusion and mechanical behaviour of engineering components
- Buckling driven debonding in sandwich columns
- On the simulation of cohesive fatigue effects in grain boundaries of a piezoelectric mesostructure
- Modeling of failure in composites by X-FEM and level sets within a multiscale framework
- In-plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations
This page was built for publication: On the numerical integration of interface elements
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4696311)
