Stress projection for membrane and shear locking in shell finite elements
From MaRDI portal
(Redirected from Publication:1067862)
Since the discovery that reduced integration could lead to more accurate results, there has been a desire to exploit this fact. But with reduced integration one must face the danger of instability. Stress projections offer a rational way of constructing elements with reduced integration but no danger of instability. This is shown in this paper for the shell element, so that the locking phenomenon may be avoided, which may make coarse meshes useless.
Recommendations
- On reduced integration and locking of flat shell finite elements with drilling rotations
- Understanding and improving the reduced integration of Mindlin shell elements
- Membrane locking and assumed strain shell elements
- Membrane locking in the finite element computation of very thin elastic shells
- Avoiding membrane locking with Regge interpolation
Cites work
- A consistent control of spurious singular modes in the 9-node Lagrange element for the Laplace and Mindlin plate equations
- A critical survey of the 9-node degenerated shell element with special emphasis on thin shell application and reduced integration
- A flat triangular shell element with improved membrane interpolation
- A Fourier analysis of spurious mechanisms and locking in the finite element method
- A simple and efficient finite element for plate bending
- A simple flat triangular shell element revisited
- A stabilization procedure for the quadrilateral plate element with one‐point quadrature
- AC0 triangular plate element with one-point quadrature
- Accuracy of some finite element models for arch problems
- An explicit formulation for an efficient triangular plate-bending element
- Applications of higher order corotational stretch theories to nonlinear finite element analysis
- Discretization by finite elements of a model parameter dependent problem
- Finite Elements Based Upon Mindlin Plate Theory With Particular Reference to the Four-Node Bilinear Isoparametric Element
- Hourglass control in linear and nonlinear problems
- scientific article; zbMATH DE number 3982678 (Why is no real title available?)
- scientific article; zbMATH DE number 4012071 (Why is no real title available?)
- scientific article; zbMATH DE number 3180131 (Why is no real title available?)
- scientific article; zbMATH DE number 3727784 (Why is no real title available?)
- scientific article; zbMATH DE number 3448212 (Why is no real title available?)
- scientific article; zbMATH DE number 3407298 (Why is no real title available?)
- Implementation and application of a 9-node Lagrange shell element with spurious mode control
- Improved finite element models for the large displacement bending and post buckling analysis of thin plates
- Improvement of Plate and Shell Finite Elements by Mixed Formulations
- Membrane Locking and Reduced Integration for Curved Elements
- Mixed finite element methods - reduced and selective integration techniques: a unification of concepts
- Mixed models and reduced/selective integration displacement models for nonlinear analysis of curved beams
- Nonlinear finite element analysis of shells. I. Three-dimensional shells
- Non‐linear transient finite element analysis with convected co‐ordinates
- On dual-complementary variational principles in mathematical physics
- On the use of deep, shallow or flat shell finite elements for the analysis of thin shell structures
- POLYNOMIAL STRESS STATES IN FIRST APPROXIMATION THEORY OF CIRCULAR CYLINDRICAL SHELLS
- Quality of trial functions in quadratic isoparametric representation of an arc
- Reduced integration and the shear-flexible beam element
- Reduced integration technique in general analysis of plates and shells
- Resultant-stress degenerated-shell element
- Shape functions and the accuracy of arch finite elements.
- Shear and membrane locking in curved C^ 0 elements
Cited in
(only showing first 100 items - show all)- Geometric nonlinear analysis of plates and cylindrical shells via a linearly conforming radial point interpolation method
- A linearly conforming radial point interpolation method (LC-RPIM) for shells
- Applications of point interpolation method for spatial general shells structures
- A comparison of rotation-free triangular shell elements for unstructured meshes
- Resultant-stress degenerated-shell element
- A modified representation of transverse shear in C^ 0 quadrilateral plate elements
- A 9-node mixed shell element based on the Hu-Washizu principle
- On the use of Lagrange multiplier compatible modes for controlling accuracy and stability of mixed shell finite elements
- Embedded hinge lines for plate elements
- A class of simple and efficient degenerated shell elements - Analysis of global spurious-mode filtering
- Simple and effective elements based upon Timoshenko-Mindlin shell theory
- Meshless methods: An overview and recent developments
- Scale resolution, locking, and high-order finite element modelling of shells
- Efficient remedy for membrane locking of 4-node flat shell elements by non-conforming modes.
- A set of pathological test to validate new finite elements
- Refinable C^1 spline elements for irregular quad layout
- A scaled boundary finite element method for static and dynamic analyses of cylindrical shells
- Developments of the mixed grid isogeometric Reissner-Mindlin shell: serendipity basis and modified reduced quadrature
- Reduced Bézier element quadrature rules for quadratic and cubic splines in isogeometric analysis
- Explicit finite deformation analysis of isogeometric membranes
- A parameter-free variational coupling approach for trimmed isogeometric thin shells
- A high order mesh-free method for buckling and post-buckling analysis of shells
- Locking alleviation in the large displacement analysis of beam elements: the strain split method
- Improved numerical integration for locking treatment in isogeometric structural elements. II: Plates and shells
- Selective and reduced numerical integrations for NURBS-based isogeometric analysis
- Nitsche's method for a coupling of isogeometric thin shells and blended shell structures
- Limitation principles for mixed finite elements based on the Hu-Washizu variational formulation
- Mixed variational principles and stabilization of spurious modes in the 9-node element
- Stabilization of the zero-energy modes of under-integrated isoparametric finite elements
- Element-free method for static and free vibration analysis of spatial thin shell structures.
- The p-version of finite element method for shell analysis
- Physical stabilization of the 4-node shell element with one point quadrature
- An efficient and locking-free flat anisotropic plate and shell triangular element
- Stress resultant geometrically nonlinear shell theory with drilling rotations. II: Computational aspects
- A practicable and locking-free laminated shallow shell triangular element of varying and adaptable curvature
- On finite element implementation of geometrically nonlinear Reissner's beam theory: Three-dimensional curved beam elements
- Geometrically nonlinear analysis of cylindrical shells using the element-free kp-Ritz method
- Geometrically nonlinear analysis of thin-shell structures based on an isogeometric-meshfree coupling approach
- Kirchhoff-Love shells within strain gradient elasticity: weak and strong formulations and an H^3-conforming isogeometric implementation
- A new mixed approach to Kirchhoff-Love shells
- Penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches with application to composite wind turbine blades
- Rotation-free Bernstein-Bézier elements for thin plates and shells -- development and validation
- Reissner-Mindlin shell theory based on tangential differential calculus
- Adjusted approximation spaces for the treatment of transverse shear locking in isogeometric Reissner-Mindlin shell analysis
- A thick shell model based on reproducing kernel particle method and its application in geometrically nonlinear analysis
- Kirchhoff-Love shell theory based on tangential differential calculus
- High order exact geometry finite elements for seven-parameter shells with parametric and implicit reference surfaces
- Weak Dirichlet boundary conditions for trimmed thin isogeometric shells
- Isogeometric continuity constraints for multi-patch shells governed by fourth-order deformation and phase field models
- An implicit \(\operatorname{G}^1\)-conforming bi-cubic interpolation for the analysis of smooth and folded Kirchhoff-Love shell assemblies
- Multipatch isogeometric mortar methods for thick shells
- A robust penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches in large deformations
- Nitsche's method for linear Kirchhoff-Love shells: formulation, error analysis, and verification
- A priori penalty factor determination for (trimmed) NURBS-based shells with Dirichlet and coupling constraints in isogeometric analysis
- Isogeometric MITC shell
- A \(C^1\)-continuous trace-finite-cell-method for linear thin shell analysis on implicitly defined surfaces
- A general-purpose, inelastic, rotation-free Kirchhoff-Love shell formulation for peridynamics
- Subdivision and G-spline hybrid constructions for high-quality geometric and analysis-suitable surfaces
- Physics-informed neural networks for shell structures
- Two-field formulations for isogeometric Reissner-Mindlin plates and shells with global and local condensation
- An open-source framework for coupling non-matching isogeometric shells with application to aerospace structures
- Discontinuous Galerkin isogeometric analysis with peridynamic model for crack simulation of shell structure
- A scaled boundary shell element formulation using Neumann expansion
- Explicit dynamic isogeometric B-rep analysis of penalty-coupled trimmed NURBS shells
- Polygonal shell elements with assumed transverse shear and membrane strains
- Splines for meshes with irregularities
- A dual domain decomposition algorithm for the analysis of non-conforming isogeometric Kirchhoff-Love shells
- Adaptive isogeometric analysis on two-dimensional trimmed domains based on a hierarchical approach
- NLIGA: a MATLAB framework for nonlinear isogeometric analysis
- Generalization of the strain-split method and evaluation of the nonlinear ANCF finite elements
- Open-source immersogeometric analysis of fluid-structure interaction using FEniCS and tIGAr
- On penalty-free formulations for multipatch isogeometric Kirchhoff-Love shells
- Isogeometric multi-patch analyses for mixed thin shells in the framework of non-linear elasticity
- An updated Lagrangian framework for isogeometric Kirchhoff-Love thin-shell analysis
- A Mindlin shell model based on the corrective smoothed particle method and accuracy implementation of the free boundary
- Accurate and locking-free analysis of beams, plates and shells using solid elements
- Coupling of non-conforming trimmed isogeometric Kirchhoff-Love shells via a projected super-penalty approach
- A Legendre spectral element model for sloshing and acoustic analysis in nearly incompressible fluids
- A \(C^0 / G^1\) multiple patches connection method in isogeometric analysis
- A new rotation-free isogeometric thin shell formulation and a corresponding continuity constraint for patch boundaries
- A robust patch coupling method for NURBS-based isogeometric analysis of non-conforming multipatch surfaces
- Isogeometric analysis using manifold-based smooth basis functions
- Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling
- A flexible approach for coupling NURBS patches in rotationless isogeometric analysis of Kirchhoff-Love shells
- Isogeometric collocation for the Reissner-Mindlin shell problem
- Splitting basis techniques in cloth simulation by isogeometric analysis
- Bézier tilings of the sphere and their applications in benchmarking multipatch isogeometric methods
- A reconstructed local \(\bar{B}\) formulation for isogeometric Kirchhoff-Love shells
- Cross-sectional mapping for refined beam elements with applications to shell-like structures
- An efficient and robust rotational formulation for isogeometric Reissner-Mindlin shell elements
- On the development of NURBS-based isogeometric solid shell elements: 2D problems and preliminary extension to 3D
- Efficient isogeometric NURBS-based solid-shell elements: mixed formulation and \(\overline B\)-method
- Linear and geometrically nonlinear analysis of plates and shells by a new refined non-conforming triangular plate/shell element
- A generalized layerwise finite element for multi-layer damping treatments
- Conforming radial point interpolation method for spatial shell structures on the stress-resultant shell theory
- An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics
- On the assumed natural strain method to alleviate locking in solid-shell NURBS-based finite elements
- Development of a mixed displacement-stress formulation for the analysis of elastoplastic structures under small strains: application to a locking-free, NURBS-based solid-shell element
- Geometrically nonlinear formulation for thin shells without rotation degrees of freedom
- Multiscale modeling of laminated thin-shell structures with direct \(\mathrm{FE}^2\)
This page was built for publication: Stress projection for membrane and shear locking in shell finite elements
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1067862)
