Computational inelasticity

Publication date: 3 November 1998

Published in: Interdisciplinary Applied Mathematics (Search for Journal in Brave)

linearization; multiplicative decomposition; operator splitting; large deformation; viscoelasticity; hyperelasticity; closest point mapping; finite plasticity; cutting plane algorithm; radial return; geometrically nonlinear theory; consistent stiffness matrix; hypoeleasticity; materials of convolution type; return mappings

Mathematics Subject Classification ID

74-02: Research exposition (monographs, survey articles) pertaining to mechanics of deformable solids

74Sxx: Numerical and other methods in solid mechanics

65Mxx: Numerical methods for partial differential equations, initial value and time-dependent initial-boundary value problems

74Cxx: Plastic materials, materials of stress-rate and internal-variable type

74Bxx: Elastic materials

Related Items

Mode I fracture of sheet metal, An atomistic-based finite deformation membrane for single layer crystalline films, A thermodynamically consistent nonlocal formulation for damaging materials, A unified multifield formulation in nonlocal damage, A coupled elastoplastic damage model for geomaterials, Computational modeling of deformation bands in granular media. I: Geological and mathematical framework, A strain space gradient plasticity theory for finite strain, Analysis and numerical simulation of strong discontinuities in finite strain poroplasticity, Bridging of length scales through gradient theory and diffusion equations of dislocations, An analysis of strain localization and wave propagation in plastic models of beams at failure, Continuum approach to material failure in strong discontinuity settings, Embedded crack vs. smeared crack models: a comparison of elementwise discontinuous crack path approaches with emphasis on mesh bias, On the toughening of brittle materials by grain bridging: promoting intergranular fracture through grain angle, strength, and toughness, High-order finite elements for shells, An elasto-plastic damage model cast in a co-rotational kinematic framework for large deformation analysis of laminated composite shells, Analysis of layered wooden shells using an orthotropic elasto-plastic model for multi-axial loading of clear spruce wood, Computational framework for long-term reliability analysis of RC structures, Elastoplastic bifurcation and collapse of axially loaded cylindrical shells, A finite element model for linear viscoelastic behaviour of pultruded thin-walled beams under general loadings, Modeling of finite strain viscoplasticity based on the logarithmic corotational description, Tracing nonlinear equilibrium paths of structures subjected to thermal loading, Isogeometric fluid-structure interaction: Theory, algorithms, and computations, Thermoviscoplastic modelling of asymmetric effects for polymers at large strains, Variational multiscale analysis of elastoplastic deformation using meshfree approximation, Nonlinear micromechanical formulation of the high fidelity generalized method of cells, Size effect and localization in J2 plasticity, Consistent derivation of the constitutive algorithm for plane stress isotropic plasticity. I: Theoretical formulation, A discontinuous Galerkin formulation for classical and gradient plasticity. II: Algorithms and numerical analysis, Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows, Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach, A wrinkling model based on material modification for isotropic and orthotropic membranes, Multi-scale Lagrangian shock hydrodynamics on Q1/P0 finite elements: theoretical framework and two-dimensional computations, A biphasic continuum approach for viscoelastic high-porosity foams: comprehensive theory, numerics, and application, Automation of primal and sensitivity analysis of transient coupled problems, A multi-resolution, non-parametric, Bayesian framework for identification of spatially-varying model parameters, Finite element simulations of martensitic phase transitions and microstructures based on a strain softening model, Insight into the physics of foam densification via numerical simulation, An elastic plastic damage formulation for concrete: application to elementary tests and comparison with an isotropic damage model, Stability and robustness issues in numerical modeling of material failure with the strong discontinuity approach, Simulation of strength difference for adhesive materials in finite deformation elasto-plasticity, Creep simulation of asymmetric effects at large strains by stress mode decomposition, Elasto-plasticity model in structural optimization of composite materials with periodic microstructures, A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals, A boundary element methodology for viscoelastic analysis: Part I with cells, Anisotropic damage-plasticity model for concrete, Aspects of bifurcation in an isotropic elastic continuum with orthotropic inelastic interface, A PVC-foam material model based on a thermodynamically elasto-plastic-damage framework exhibiting failure and crushing, An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals, A combined viscoelastic-viscoplastic behavior of particle reinforced composites, On identification of the arterial model parameters from experiments applicable ``in vivo, On the effective stress in unsaturated porous continua with double porosity, A comparison between pseudo-elastic and damage models for modelling the Mullins effect in industrial rubber components, On the impact of the time increment on sensitivity analysis during the elastic-to-viscoplastic transition in metals, On finite strain micromorphic elastoplasticity, Elastoplastic modeling of circular fiber-reinforced ductile matrix composites considering a finite RVE, Elastoplastic analysis of soil-structures strengthened by two-directional reinforcements using a multiphase approach, Macro-performance evaluation of friction stir welded automotive tailor-welded blank sheets. II: Formability, Experimental characterization and model identification of directional hardening effects in metals for complex strain path changes, A nonlinear homogenization procedure for periodic masonry, Macro modelling and homogenization for transformation induced plasticity of a low-alloy steel, Consistent integration of the constitutive equations of Gurson materials under adiabatic conditions, Analytical DSA for explicit dynamics of elastic-plastic shells, Multiscale enrichment based on partition of unity for nonperiodic fields and nonlinear problems, Mechanics of extended continua: Modeling and simulation of elastic microstretch materials, Coupled damage-plasticity constitutive model and direct stress interpolation, Explicit Runge-Kutta methods for the integration of rate-type constitutive equations, Exact integration of the von Mises elastoplasticity model with combined linear isotropic-kinematic hardening, Fractional-order relaxation laws in nonlinear viscoelasticity, A micromechanical basis for partitioning the evolution of grain bridging in brittle materials, Thermodynamic laws and consistent Eulerian formulation of finite elastoplasticity with thermal effects, An alternative method for the integration of continuum damage evolution laws, The equivalence of the radial return and Mendelson methods for integrating the classical plasticity equations, A small-strain model to simulate the curing of thermosets, Robust numerical analysis of homogeneous and non-homogeneous deformations, A plasticity framework for (linear elastic) fracture mechanics, On the effective behavior of nonlinear inelastic composites. I: Incremental variational principles, Phenomenological model for the macroscopical material behavior of ferroelectric ceramics, Convergence of adaptive finite element methods in computational mechanics, Second-order accurate integration algorithms for von-Mises plasticity with a nonlinear kinematic hardening mechanism, On standard and vector finite element analysis of a strict anti-plane shear plasticity model with elastic curvature, A unified stress update algorithm for explicit transient shell dynamics with combined isotropic-kinematic hardening in Eulerian rate-type phenomenological finite elasto-plasticity models, Modelling the mechanical behaviour of living bony interfaces, Adaptive FEM analysis of selected elastic-visco-plastic problems, A discontinuous Galerkin formulation for classical and gradient plasticity. I: Formulation and analysis, A Newton-Schur alternative to the consistent tangent approach in computational plasticity, Eigendeformation-based reduced order homogenization for failure analysis of heterogeneous materials, Efficient and modular algorithms in modeling finite inelastic deformations: objective integration, parameter identification and sub-stepping techniques, Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device, Functional a posteriori error estimates for incremental models in elasto-plasticity, Prediction of plastic strain accumulation in continuous fiber reinforced laminates by a constitutive ply model, An Eulerian multiplicative constitutive model of finite elastoplasticity, Computational modelling of diarthrodial joints. Physiological, pathological and Pos-surgery simulations, Associative coupled thermoplasticity at finite strains: Formulation, numerical analysis and implementation, A nonsmooth Newton method for elastoplastic problems, A plastic nonlocal damage model, Frameworks for finite strain viscoelastic-plasticity based on multiplicative decompositions. I: Continuum formulations, Frameworks for finite strain viscoelastic-plasticity based on multiplicative decompositions. II: Computational aspects, Anistropic creep modeling based on elastic projection operators with applications to CMSX-4 superalloy, Energy consistent algorithms for dynamic finite deformation plasticity, On the numerical integration of three-invariant elastoplastic constitutive models., Numerical integration of lattice rotation in polycrystal plasticity, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, On the strong discontinuity approach in finite deformation settings, An analysis of strain localization in a shear layer under thermally coupled dynamic conditions. Part 1: Continuum thermoplastic models, A study on finite elements for capturing strong discontinuities, A numerical model for the cyclic deterioration of railway tracks, An arbitrary Lagrangian-Eulerian finite element method for finite strain plasticity, Linearization and return mapping algorithms for elastoplasticity models, Implicit time integration for the material point method: Quantitative and algorithmic comparisons with the finite element method, 3D modelling of strong discontinuities in elastoplastic solids: fixed and rotating localization formulations, Numerical studies of hyperplasticity with single, multiple and a continuous field of yield surfaces, A posteriori error estimation in non-linear FE analyses of shell structures, Constitutive modeling of cementitious materials in the framework of chemoplasticity, A time domain FEM approach based on implicit Green's functions for non-linear dynamic analysis, Implicit stress integration procedure for small and large strains of the Gurson material model, Numerical study of consistency of rate constitutive equations with elasticity at finite deformation, Consistent tangent operators for constitutive rate equations, Unnamed Item, A unified approach to the implicit integration of standard, non-standard and viscous plasticity models, Improvements and algorithmical considerations on a recent three-dimensional model describing stress-induced solid phase transformations, Criteria for the approximation property for multigrid methods in nonnested spaces, VARIATIONAL MULTISCALE ANALYSIS OF SOLIDS WITH STRAIN GRADIENT PLASTIC EFFECTS USING MESHFREE APPROXIMATION, Modern Approaches on Rolling Contact, Algorithmic formulation and numerical implementation of coupled electromagnetic‐inelastic continuum models for electromagnetic metal forming, Strain localization in soft rock—a typical rate‐dependent solid: experimental and numerical studies, Coupling between anisotropic damage and permeability variation in brittle rocks, Parameter sensitivity in finite element analysis with constitutive models of the rate type, Obstacle Test for Large Deformation Plasticity Problems, Local existence and uniqueness for quasistatic finite plasticity with grain boundary relaxation, Computational modelling of plasticity induced by martensitic phase transformations, Geometrical numerical algorithms for a plasticity model with Armstrong-Frederick kinematic hardening rule under strain and stress controls, On advanced solution strategies to overcome locking effects in strong discontinuity approaches, Efficient and accurate multilayer solid-shell element: non-linear materials at finite strain, MODIFIED INTEGRATION ALGORITHM IN THE STRAIN SPACE FOR RATE AND TEMPERATURE DEPENDENT ELASTO-PLASTIC CONSTITUTIVE MODEL, An Eulerian finite element formulation for modelling stationary finite strain elastic deformation processes, Topology and shape optimization for elastoplastic structural response., Implicit consistent and continuum tangent operators in elastoplastic boundary element formulations, Some remarks on the compressed matrix representation of symmetric second-order and fourth-order tensors, A high-order Eulerian Godunov method for elastic-plastic flow in solids, Consistent tangent matrices for substepping schemes, On the formulation and numerical solution of problems in anisotropic finite plasticity, Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity, Time-stepping schemes for systems of Volterra integro-differential equations, Accurate stress updating algorithm based on constant strain rate assumption, A class of general algorithms for multi-scale analyses of heterogeneous media, Recent advances in models for thermal oxidation of silicon, Solution procedures for \(J_3\) plasticity and viscoplasticity, Unnamed Item, Unnamed Item, Consistent thermodynamic modelling of wire-reinforced geomaterials, BEM formulation for von Kármán plates, Unnamed Item, Multiphase model for inclusion-reinforced geostructures: Application to rock-bolted tunnels and piled raft foundations, Three‐dimensional stochastic finite element method for elasto‐plastic bodies, Dimensional model reduction in non‐linear finite element dynamics of solids and structures, Adaptivity in computational mechanics of concrete structures, Adaptive return mapping algorithms for J2 elasto‐viscoplastic flow, The efficiency of the p‐version finite element method in a distributed computing environment, A micromechanical model for martensitic phase-transformations in shape-memory alloys based on energy-relaxation, Adaptive remeshing in large plastic strain with damage, Algorithms by Design: Part II—A Novel Normalized Time Weighted Residual Methodology and Design of a Family of Symplectic-Momentum Conserving Algorithms for Nonlinear Structural Dynamics, Algorithms by Design: Part III—A Novel Normalized Time Weighted Residual Methodology and Design of Optimal Symplectic-Momentum Based Controllable Numerical Dissipative Algorithms for Nonlinear Structural Dynamics, An internally consistent integration method for critical state models, Three-dimensional fracture simulations based on the SDA, Energy-based simulation of concrete cracking using an improved mixed-mode cohesive crack model within a meshless discretization, Integration schemes for von-Mises plasticity models based on exponential maps: numerical investigations and theoretical considerations, Capturing strain localization in dense sands with random density, Thermal stress evaluation in the steel continuous casting process, Design sensitivity analysis in large deformation elasto-plastic and elasto-viscoplastic problems, Algorithms by design with illustrations to solid and structural mechanics/dynamics, A novel ‘optimal’ exponential-based integration algorithm for von-Mises plasticity with linear hardening: Theoretical analysis on yield consistency, accuracy, convergence and numerical investigations, Mixed mode failure analysis of bonded joints with rate-dependent interface models, A NUMERICAL SOLUTION METHOD FOR AN INFINITESIMAL ELASTO-PLASTIC COSSERAT MODEL, Dimensional analysis of a model problem in thermoelasto-plasticity for cylindrical bodies under heating and cooling, Non-linear seismic analysis of RC structures with energy-dissipating devices, Iterative solvers within sequences of large linear systems in non-linear structural mechanics, On the constitutive modeling of reinforced rubber in a broad frequency domain, Non-linear analysis of cable networks by FEM and experimental validation, Upper bound solution to elasticity problems: A unique property of the linearly conforming point interpolation method (LC-PIM), On finite-strain damage of viscoelastic-fibred materials. Application to soft biological tissues, Uzawa and Newton algorithms to solve frictional contact problems within the bi-potential framework, Toward realization of computational homogenization in practice, Theory and finite element computation of cyclic martensitic phase transformation at finite strain, Generalized self-consistent homogenization using the Finite Element Method, Numerical approaches to rate-independent processes and applications in inelasticity, A Computational Framework for Patient-Specific Analysis of Articular Cartilage Incorporating Structural Information from DT-MRI, Averaging techniques for reliable a posteriori FE error control in elastoplasticity with hardening, Algorithmic stabilization of FE analyses of 2D frictional contact problems with large slip., Strong coupling methods in multi-phase and multi-scale modeling of inelastic behavior of heterogeneous structures., Two-scale kinematics and linearization for simultaneous two-scale analysis of periodic heterogeneous solids at finite strain., An efficient time/frequency domain algorithm for modal analysis of non-linear models discretized by the FEM., Comparison of plastic, viscoplastic, and creep models when modelling welding and stress relief heat treatment., Simulation and interpretation of diffuse mode bifurcation of elastoplastic solids., A mortar segment-to-segment contact method for large deformation solid mechanics., Thermomechanical model of a continuous casting process, A formulation of elasticity and viscoelasticity for fibre-reinforced material at small and finite strains, Finite element procedure for solving contact thermoelastoplastic problems at large strains, normal and high pressures., A variational multiscale approach to strain localization -- formulation for multidimensional problems, Numerical differentiation for local and global tangent operators in computational plasticity, Finite deformation plasticity based on the additive split of the rate of deformation and hyperelasticity, Dynamic non-linear stress analysis by the mass matrix BEM, Continuous and discontinuous Galerkin methods with finite elements in space and time for parallel computing of viscoelastic deformation, A damage mechanics approach to stress softening and its application to rubber, An extension of 3-D procedure to large strain analysis of shells, Runge-Kutta methods in elastoplasticity, A comparison between the Perzyna viscoplastic model and the consistency viscoplastic model, A framework for multiplicative associative isotropic elasto-plasticity, that preserves the structure of the infinitesimal theory, A contribution to the numerical nonlinear analysis of three-dimensional truss systems considering large strains, damage and plasticity, FETI based algorithms for contact problems: Scalability, large displacements and 3D Coulomb friction, On the relevance of continuum damage mechanics as applied to the Mullins effect in elastomers, A study of strain localization in a multiple scale framework. -- The one-dimensional problem, An implicit integration algorithm for the finite element implementation of a nonlinear anisotropic material model including hysteretic nonlinearity, On the numerical algorithm for isotropic-kinematic hardening with the Armstrong-Frederick evolution of the back stress, Elasto-plastic analysis of shells with the triangular element TRIC, Finite element methods for the analysis of strong discontinuities in coupled poro-plastic media., Discontinuous Galerkin time discretization in elastoplasticity: Motivation, numerical algorithms, and applications, A conservative three-dimensional Eulerian method for coupled solid-fluid shock capturing., An incremental formulation for rate-independent finite rigid plasticity., An iterative method for shakedown analysis., Bifurcation of elastoplastic solids to shear band mode at finite strain., A structural model for the viscoelastic behavior of arterial walls: continuum formulation and finite element analysis., Development of an object-oriented finite element program: application to metal-forming and impact simulations, A mathematical framework for finite strain elastoplastic consolidation. I: Balance laws, variational formulation, and linearization, Computational aspects of one-dimensional shape memory alloy modeling with phase diagrams, Convergence analysis of discrete approximations of problems in hardening plasticity, Cam-Clay plasticity. III: Extension of the infinitesimal model to include finite strains, Elastoplastic materials with martensitic phase transition and twinning at finite strains: Numerical solution with the finite element method, Numerical implementation of multiplicative elasto-plasticity into assumed strain elements with application to shells at large strains, Implicit finite element formulations for multi-phase transformation in high carbon steel, New formulations, positivity preserving discretizations and stability analysis for non-Newtonian flow models, On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity, Finite element methods for the multi-scale modeling of softening hinge lines in plates at failure, Micromechanics of inelastic composites with misaligned inclusions: numerical treatment of orientation, Stabilized mixed finite element formulations for materially nonlinear partially saturated two-phase media, Improving stability of stabilized and multiscale formulations in flow simulations at small time steps, A macro-element to simulate 3D soil-structure interaction considering plasticity and uplift, A nonlocal model with strain-based damage, Energy conserving balance of explicit time steps to combine implicit and explicit algorithms in structural dynamics, Reliable and efficient equilibrated a posteriori finite element error control in elastoplasticity and elastoviscoplasticity with hardening, Numerical analysis of large deformation processes at elevated temperatures, Conditions for equivalence between the Hu-Washizu and related formulations, and computational behavior in the incompressible limit, Modeling strong discontinuities at finite strains -- a novel numerical implementation, A variational multiscale method for inelasticity: application to superelasticity in shape memory alloys, Critical state plasticity. VI: Meso-scale finite element simulation of strain localization in discrete granular materials, Phenomenological 3D and 1D consistent models for shape-memory alloy materials, On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming, On some topics for the numerical simulation of ductile fracture, On the modeling of hardening in metals during non-proportional loading, On a new finite element technology for electromagnetic metal forming processes, Simulation of the densification of real open-celled foam microstructures, The structural performance of the periodic truss, Impact initiation of explosives and propellants via statistical crack mechanics, Numerical modelling of welding, Elastoplastic phenomena in multibody impact dynamics, A cohesive damage-friction interface model accounting for water pressure on crack propagation, Reduction of excessive energy in the four-noded membrane quadrilateral element. II: Near incompressibility and \(J_{2}\) plasticity, Modelling of the internal stress in dislocation cell structures, Computational modelling of diarthrodial joints. Physiological, pathological and pos-surgery simulations, On modelling the parallel diffusion flow in deforming porous media, Finite element approach to modelling evolution of 3D shape memory materials, Material behavior of steel - modeling of complex phenomena and thermodynamic consistency, Wavelet-Galerkin method for one-dimensional elastoplasticity and damage problems: Constitutive modeling and computational aspects, Objective stress rates, path-dependence properties and non-integrability problems, Dynamics of porous media at finite strain, The ALE formulation of bodies in rolling contact: theoretical foundations and finite element approach, Wave field simulation for heterogeneous porous media with singular memory drag force, Modeling 3D crack propagation in unreinforced concrete using PUFEM, Modeling spatial motion of 3D deformable multibody systems with nonlinearities, An efficient algorithm for the evaluation of convolution integrals, A novel algorithmic framework for the numerical implementation of locally embedded strong discontinuities, Implicit numerical integration of a three-invariant, isotropic/kinematic hardening cap plasticity model for geomaterials, Numerical analyses of discontinuous material bifurcation: strong and weak discontinuities, An anisotropic fibre-matrix material model at finite elastic-plastic strains, Frictional heating in contact mechanics. A methodology to deal with high temperature gradients, Finite element analysis of non-isothermal multiphase geomaterials with application to strain localization simulation, On the modeling of highly localized deformations induced by material failure: the strong discontinuity approach, Contribution of computational mechanics in numerical simulation of machining and blancking: state-of-the-art, Meshfree modelling and characterisation of thermomechanical behaviour of NiTi alloys, Stabilized finite element formulation for elastic--plastic finite deformations, A mortar segment-to-segment frictional contact method for large deformations, Some mathematical problems in perfect plasticity, Computational strategies for predictive geology with reference to salt tectonics, On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials, Cam-Clay plasticity. V: A mathematical framework for three-phase deformation and strain localization analyses of partially saturated porous media, A covariant formulation of anisotropic finite plasticity: theoretical developments, A material force method for inelastic fracture mechanics