A Ritz approach for the static analysis of planar pantographic structures modeled with nonlinear Euler-Bernoulli beams
From MaRDI portal
Publication:1790159
DOI10.1007/s00161-018-0665-3zbMath1396.74070OpenAlexW2802189671MaRDI QIDQ1790159
Simon R. Eugster, Mario Spagnuolo, Tomasz Lekszycki, Ugo A. Andreaus
Publication date: 2 October 2018
Published in: Continuum Mechanics and Thermodynamics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s00161-018-0665-3
Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Finite element methods applied to problems in solid mechanics (74S05) Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs (65N30)
Related Items
A new deformation measure for the nonlinear micropolar continuum, Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach, Modeling of three-dimensional beam nonlinear vibrations generalizing Hencky’s ideas, Experimental analysis, discrete modeling and parameter optimization of SLS-printed bi-pantographic structures, A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers, Buckling of tower buildings on elastic foundation under compressive tip forces and self-weight, Nonlinear waves in pantographic beams induced by transverse impulses, Nonlinear dynamics of uniformly loaded Elastica: Experimental and numerical evidence of motion around curled stable equilibrium configurations, Inverse analysis of metamaterials and parameter determination by means of an automatized optimization problem, A new torsional energy for pantographic sheets, On the well posedness of static boundary value problem within the linear dilatational strain gradient elasticity, Large Oscillations Around Curled Equilibrium Configurations of Uniformly Loaded Euler–Bernoulli Beams: Numerical and Experimental Evidences, Variational asymptotic homogenization of beam-like square lattice structures, Stiffness optimization in nonlinear pantographic structures, Parameter identification of a second-gradient model for the description of pantographic structures in dynamic regime, Material characterization and computations of a polymeric metamaterial with a pantographic substructure, Three-point bending test of pantographic blocks: numerical and experimental investigation, The Effect of Mechanical Load-induced Intraosseous Pressure Gradients on Bone Remodeling, Dynamical Vector Fields on Pantographic Sheet: Experimental Observations, Analytical Solutions of 2-dimensional Second Gradient Linear Elasticity for Continua with Cubic-D4 Microstructure, How the Properties of Pantographic Elementary Lattices Determine the Properties of Pantographic Metamaterials, Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?, From the swarm robotics to material deformations, A review of the class of Bouc-Wen differential models for simulating mechanical hysteresis phenomena, A generalized formulation of time integration methods for nonlinear dynamic analysis of hysteretic mechanical systems, Quasi-harmonic solutions for transversely isotropic magneto-electro-thermo-elasticity: a symbolic mathematics approach, Form finding of shell structures by using membrane theory, Influence of non-structural components on equivalent linearization of buildings, Do we really need pantographic structures?, Pantographic beam: a complete second gradient 1D-continuum in plane, Dynamics of pantographic sheet around the clamping region: experimental and numerical analysis, Kinematically triggered nonlinear vibrations of Hencky-type pantographic sheets
Cites Work
- Simplified analysis of a generalized bias test for fabrics with two families of inextensible fibres
- Effective properties of fiber and platelet systems and related phase arrangements in \(n\)-phase heterogenous media
- Geometrically nonlinear higher-gradient elasticity with energetic boundaries
- A second gradient formulation for a 2D fabric sheet with inextensible fibres
- A review on 2D models for the description of pantographic fabrics
- Non-standard coupled extensional and bending bias tests for planar pantographic lattices. I: Numerical simulations
- Non-standard coupled extensional and bending bias tests for planar pantographic lattices. II: Comparison with experimental evidence
- Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models
- An explicit solution for the dynamics of a taut string of finite length carrying a traveling mass: the subsonic case
- A finite element framework for continua with boundary energies. I: The two-dimensional case
- The influence of surface tension on the effective stiffness of nanosize plates
- Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof
- Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence
- Topology optimization in damage governed low cycle fatigue
- The boundary-due terms in the Green operator of inclusion patterns from distant to contact and to connected situations using Radon transforms: illustration for spheroid alignments in isotropic media
- Strain-based anisotropic damage modelling and unilateral effects
- Potts models in the continuum. Uniqueness and exponential decay in the restricted ensembles
- Coexistence of ordered and disordered phases in Potts Models in the continuum
- Displacement analysis in elastic-plastic frames at plastic collapse
- Deflection of elastic-plastic frames at finite spread of yielding zones
- Edge contact forces and quasi-balanced power
- A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium
- Homogenization à la Piola produces second gradient continuum models for linear pantographic lattices
- Numerical simulations of classical problems in two-dimensional (non) linear second gradient elasticity
- An overview of the modelling of fracture by gradient damage models
- Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model
- Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies
- Nonlinear dynamics of filaments. II: Nonlinear analysis
- On generalized Cosserat-type theories of plates and shells: a short review and bibliography
- Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization
- Continuum modelling of a beam-like latticed truss: Identification of the constitutive functions for the contact and inertial actions
- Constitutive models for strongly curved beams in the frame of isogeometric analysis
- Cosserat-Type Rods
- Generalized continua and non-homogeneous boundary conditions in homogenisation methods
- An incremental procedure for deformation analysis of elastic-plastic frames
- Invariant formulation of phenomenological failure criteria for orthotropic sheets and optimisation of their strength
- Isogeometric analysis of plane-curved beams
- Wave propagation in pantographic 2D lattices with internal discontinuities
- On the effect of shear stiffness on the plane deformation of linear second gradient pantographic sheets
- Exegesis of the Introduction and Sect. I from “Fundamentals of the Mechanics of Continua”** by E. Hellinger
