The influence of constraint on crack tip stress fields in strength mismatched welded joints.

DOI10.1016/S0022-5096(97)00098-7MaRDI QIDQ1973602zbMATH OpenOpenAlexFDO

Authors M. C. Burstow, I. C. Howard, Robert A. Ainsworth

Publication date 8 July 2002

Published in Journal of the Mechanics and Physics of Solids (Search for Journal in Brave)

Full work available at URL https://doi.org/10.1016/s0022-5096(97)00098-7

zbMATH Keywords

finite elementselastic-plastic material

Mathematics Subject Classification ID

Anelastic fracture and damage (74R20) Finite element methods applied to problems in solid mechanics (74S05)

Recommendations

• Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mispatched welded joint
• The effect of yield strength mis-match on the fracture analysis of welded joints: Slip-line field solutions for pure bending
• Modelling the effect of HAZ undermatching on the crack-tip stress distribution in idealized welds
• Effects of weld strength mismatch on \(J\) and CTOD estimation procedure for SE(B) specimens
• Mismatch limit loads and approximate \(J\) estimates for tensile plates with constant-depth surface cracks in the center of welds

Cites work

• scientific article; zbMATH DE number 3127099 (Why is no real title available?)
• Finite-element formulations for problems of large elastic-plastic deformation
• Plane strain deformation near a crack tip in a power-law hardening material
• Singular behaviour at the end of a tensile crack in a hardening material

Cited in

(10)

• Upper bound limit load solutions for welded joints with cracks
• Use of the quasi-static Johnson-Cook model in the failure assessment of tensile specimens with metallurgical constraints
• Elastic field prediction for a welding repaired material using a semi-analytical method
• Mismatch limit loads and approximate \(J\) estimates for tensile plates with constant-depth surface cracks in the center of welds
• Effects of weld strength mismatch on \(J\) and CTOD estimation procedure for SE(B) specimens
• The effect of yield strength mis-match on the fracture analysis of welded joints: Slip-line field solutions for pure bending
• Modelling the effect of HAZ undermatching on the crack-tip stress distribution in idealized welds
• Mechanical modeling and fracture analysis for a non-homogeneous weldment with a crack perpendicular to the interface
• Numerical study of the plastic behaviour in tension of welds in high strength steels.
• Effect of residual stresses on the crack-tip constraint in a modified boundary layer model

This page was built for publication: The influence of constraint on crack tip stress fields in strength mismatched welded joints.

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1973602)