Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
From MaRDI portal
Publication:2379609
Recommendations
- Weak Dirichlet boundary conditions for wall-bounded turbulent flows
- Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
- Isogeometric variational multiscale large-eddy simulation of fully-developed turbulent flow over a wavy wall
- Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
- Large-eddy simulation with near-wall modeling using weakly enforced no-slip boundary conditions
Cites work
- A critical evaluation of the resolution properties of B-spline and compact finite difference methods
- A generalized-\(\alpha\) method for integrating the filtered Navier-Stokes equations with a stabilized finite element method
- A nested iterative scheme for computation of incompressible flows in long domains
- A new finite element formulation for computational fluid dynamics. III: The generalized streamline operator for multidimensional advective- diffusive systems
- A Single Formula for the “Law of the Wall”
- A Time Integration Algorithm for Structural Dynamics With Improved Numerical Dissipation: The Generalized-α Method
- A variational multiscale method for the large eddy simulation of compressible turbulent flows on unstructured meshes --application to vortex shedding
- An Elliptic Collocation-Finite Element Method with Interior Penalties
- B-spline method and zonal grids for simulations of complex turbulent flows
- Computation of moving boundaries and interfaces and stabilization parameters
- Computational study on the internal layer in a diffuser
- Direct numerical simulation of turbulent channel flow up to Reτ=590
- Encyclopedia of computational mechanics. Vol. 1. Fundamentals. Vol. 2. Solids and structures. Vol. 3. Fluids
- Energy transfers and spectral eddy viscosity in large-eddy simulations of homogeneous isotropic turbulence: Comparison of dynamic Smagorinsky and multiscale models over a range of discretizations
- GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems
- scientific article; zbMATH DE number 5719287 (Why is no real title available?)
- scientific article; zbMATH DE number 1283986 (Why is no real title available?)
- scientific article; zbMATH DE number 1324108 (Why is no real title available?)
- scientific article; zbMATH DE number 1501542 (Why is no real title available?)
- scientific article; zbMATH DE number 840869 (Why is no real title available?)
- Isogeometric analysis of structural vibrations
- ISOGEOMETRIC ANALYSIS: APPROXIMATION, STABILITY AND ERROR ESTIMATES FOR h-REFINED MESHES
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- Large eddy simulation and the variational multiscale method
- Large eddy simulation of turbulent channel flows by the variational multiscale method
- On stabilized finite element methods for linear systems of convection-diffusion-reaction equations
- Parallel iterative methods for sparse linear systems
- Partition selection in multiscale turbulence modeling
- Patient-specific vascular NURBS modeling for isogeometric analysis of blood flow
- Residual-based variational multiscale theory of LES turbulence modeling
- Sensitivity of the scale partition for variational multiscale large-eddy simulation of channel flow
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- Study of flow in a planar asymmetric diffuser using large-eddy simulation
- The multiscale formulation of large eddy simulation: Decay of homogeneous isotropic turbulence
- The role of continuity in residual-based variational multiscale modeling of turbulence
- The variational multiscale method for laminar and turbulent flow
- Two-dimensional mesh embedding for B-spline methods
- Unified Analysis of Discontinuous Galerkin Methods for Elliptic Problems
- Variational multiscale large eddy simulation of turbulent flow in a diffuser
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Weak Dirichlet boundary conditions for wall-bounded turbulent flows
- Weak imposition of Dirichlet boundary conditions in fluid mechanics
- Zonal embedded grids for numerical simulations of wall-bounded turbulent flows
Cited in
(only showing first 100 items - show all)- Weak Dirichlet boundary conditions for wall-bounded turbulent flows
- Direct immersogeometric fluid flow analysis using B-rep CAD models
- Large-eddy simulation with near-wall modeling using weakly enforced no-slip boundary conditions
- A strategy to interface isogeometric analysis with Lagrangian finite elements -- application to incompressible flow problems
- The tetrahedral finite cell method for fluids: immersogeometric analysis of turbulent flow around complex geometries
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
- Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
- LES and RANS simulation of wind- and wave-forced oceanic turbulent boundary layers in shallow water with wall modeling
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
- Parametric finite elements with bijective mappings
- Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- Using ALE-VMS to compute aerodynamic derivatives of bridge sections
- Recent developments in variational multiscale methods for large-eddy simulation of turbulent flow
- Nitsche's method for a coupling of isogeometric thin shells and blended shell structures
- Computational cost of isogeometric multi-frontal solvers on parallel distributed memory machines
- An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
- Numerical analysis of a finite element projection-based VMS turbulence model with wall laws
- Fluid-structure interaction modeling of wind turbines: simulating the full machine
- Explicit trace inequalities for isogeometric analysis and parametric hexahedral finite elements
- Refined isogeometric analysis for a preconditioned conjugate gradient solver
- Preconditioning immersed isogeometric finite element methods with application to flow problems
- A residual-based variational multiscale method with weak imposition of boundary conditions for buoyancy-driven flows
- Structural shape optimization of three dimensional acoustic problems with isogeometric boundary element methods
- A mixed formulation of B-spline and a new class of spherical Hankel shape functions for modeling elastostatic problems
- Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
- Isogeometric analysis for turbulent flow
- Weak Dirichlet boundary conditions for trimmed thin isogeometric shells
- An interactive geometry modeling and parametric design platform for isogeometric analysis
- Isogeometric collocation methods with generalized B-splines
- Isogeometric residual minimization method (iGRM) with direction splitting preconditioner for stationary advection-dominated diffusion problems
- An octree-based immersogeometric approach for modeling inertial migration of particles in channels
- Simulation of stably stratified turbulent channel flow using residual-based variational multiscale method and isogeometric analysis
- Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method
- A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion
- Turbulent kinetic dissipation analysis for residual-based large eddy simulation of incompressible turbulent flow by variational multiscale method
- Geometrically consistent aerodynamic optimization using an isogeometric discontinuous Galerkin method
- Finite element methodology for modeling aircraft aerodynamics: development, simulation, and validation
- Phase-field modeling for polarization evolution in ferroelectric materials via an isogeometric collocation method
- Drag computation for incompressible flows with a Nitsche's type stabilization method
- Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
- Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method
- Multiscale stabilization for convection-diffusion equations with heterogeneous velocity and diffusion coefficients
- Variational multiscale modeling with discretely divergence-free subscales
- Open-source immersogeometric analysis of fluid-structure interaction using FEniCS and tIGAr
- Nitsche's method as a variational multiscale formulation and a resulting boundary layer fine-scale model
- U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization
- Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
- Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
- Segregated Runge-Kutta time integration of convection-stabilized mixed finite element schemes for wall-unresolved LES of incompressible flows
- Element length calculation in B-spline meshes for complex geometries
- Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
- The value of continuity: refined isogeometric analysis and fast direct solvers
- A scalable block-preconditioning strategy for divergence-conforming B-spline discretizations of the Stokes problem
- Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
- 2D residual-based LES of flow around a pipeline close to a flat seabed
- Hierarchically refined and coarsened splines for moving interface problems, with particular application to phase-field models of prostate tumor growth
- Dispersion-optimized quadrature rules for isogeometric analysis: modified inner products, their dispersion properties, and optimally blended schemes
- CutFEM topology optimization of 3D laminar incompressible flow problems
- Immersogeometric cardiovascular fluid-structure interaction analysis with divergence-conforming B-splines
- Isogeometric analysis for compressible flows using a discontinuous Galerkin method
- Embedded shell finite elements: solid-shell interaction, surface locking, and application to image-based bio-structures
- Rapid B-rep model preprocessing for immersogeometric analysis using analytic surfaces
- Isogeometric variational multiscale large-eddy simulation of fully-developed turbulent flow over a wavy wall
- Simulation of laminar and turbulent concentric pipe flows with the isogeometric variational multiscale method
- Improving stability of stabilized and multiscale formulations in flow simulations at small time steps
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- A discontinuous Galerkin approach for high-resolution simulations of three-dimensional flows
- Multiscale stabilization for convection-dominated diffusion in heterogeneous media
- Optimal quadrature rules for odd-degree spline spaces and their application to tensor-product-based isogeometric analysis
- An algebraic variational multiscale-multigrid method for large-eddy simulation: generalized-\(\alpha\) time integration, Fourier analysis and application to turbulent flow past a square-section cylinder
- Fluid-structure interaction simulation of pulsatile ventricular assist devices
- Statistical behavior of the orthogonal subgrid scale stabilization terms in the finite element large eddy simulation of turbulent flows
- Isogeometric collocation: cost comparison with Galerkin methods and extension to adaptive hierarchical NURBS discretizations
- A multi-patch nonsingular isogeometric boundary element method using trimmed elements
- Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
- Divergence-conforming discretization for Stokes problem on locally refined meshes using LR B-splines
- Multi-patch nonsingular isogeometric boundary element analysis in 3D
- Finite element formulation of general boundary conditions for incompressible flows
- Nitsche's method for non-conforming multipatch coupling in hyperelastic isogeometric analysis
- Wall-function-based weak imposition of Dirichlet boundary condition for stratified turbulent flows
- Direct immersogeometric fluid flow and heat transfer analysis of objects represented by point clouds
- Stabilized and variationally consistent integrated meshfree formulation for advection-dominated problems
- Effective integration of sophisticated operators in isogeometric analysis with \texttt{igatools}
- Isogeometric preconditioners based on fast solvers for the Sylvester equation
- Isogeometric finite element data structures based on Bézier extraction of T-splines
- A computational procedure for prebending of wind turbine blades
- A finite strain Eulerian formulation for compressible and nearly incompressible hyperelasticity using high-order B-spline finite elements
- A novel formulation for Neumann inflow boundary conditions in biomechanics
- Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method
- NURBS based least-squares finite element methods for fluid and solid mechanics
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- An immersogeometric method for the simulation of turbulent flow around complex geometries
- An image-based computational framework for analyzing disease occurrence and treatment outcome in patients with peripheral arterial disease
- Fluid-structure interaction modeling and isogeometric analysis of a hydraulic arresting gear at full scale
- Recent advances in fluid-structure interaction simulations of wind turbines
This page was built for publication: Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2379609)
