scientific article; zbMATH DE number 3866722
axial compressionbifurcation problemboundary conditionscircular cylindrical shellscombined loadscompressionconstant thicknesselastic stabilityhomogeneous, isotropic materialinitial imperfectionsmethods of solutionsnonlinear theoriespartially liquid-filled cylinderspost-buckling behaviourprebuckling statepressurepressure with torsionstatic conservative loadstorsiontransverse edge loadunstiffened shells
The author of this monograph about the elastic stability of circular cylindrical shells, who himself has published numerous papers on the subject, which he includes in the book, confines himself to the examination of unstiffened shells with constant thickness, made of homogeneous, isotropic material under static conservative loads. The book about this limited, by now completely investigated subject, is clearly organized and easily readable, the topic well presented. In the first of a total of six chapters, the most important nonlinear theories (Donnell, Flügge, Sanders) are described and the corresponding restrictions and assumptions are stated. Chapter 2 deals with the bifurcation problem. Results obtained using the different theories are compared for shells under each of the fundamental loads: torsion, pressure and compression. Special significance is attached to the effect of the prebuckling state and the boundary conditions. In the 3rd chapter the post-buckling behaviour is investigated. Experimental results are compared with the corresponding theoretical results, obtained by application of the Galerkin method. Chapter 4 covers in particular the effect of initial imperfections on the buckling behaviour of the shell. The author compares results obtained through direct nonlinear analysis with those, obtained through an asymptotic analysis based on the ideas of Koiter and Budiansky. The next chapter describes the buckling and post-buckling behaviour under combined loads: pressure with torsion, axial compression or transverse edge load. The final chapter is dedicated to the buckling problem of partially liquid- filled cylinders. In each chapter, the problem treated is defined clearly, then methods of solutions are pointed out, and the problem is solved in different manners. Results are presented in many figures and diagramms, and are discussed. One may find buckling loads, corresponding modes and post-buckling equilibrium paths for almost all loads, boundary conditions and geometrical parameters appearing in practice (if not, the reference list with 205 references will give further help). All considered, the author has succeeded very well, and the book can be highly recommended to the interested reader.
- Dynamic stability of a thin cylindrical shell with top mass subjected to harmonic base-acceleration
- Bifurcation problems with \(O(2)\oplus Z_ 2\) symmetry and the buckling of a cylindrical shell
- Model of the dynamics of receptor potential in a mechanoreceptor
- Localized buckling in long axially-loaded cylindrical shells
- A two-parameter spectral theorem
- Perturbation formulation of continuation method including limit and bifurcation points
- Simplified prediction of creep buckling of cylinders under external pressure. I: Finite element validation
- Koiter-boundary layer singular perturbation method for axially compressed stiffened cylindrical shells
- A perturbation method for the determination of the buckling strength of imperfection-sensitive structures
- Imperfection sensitive strength variation of soil specimens
- Influence of physical and geometrical uncertainties in the parametric instability load of an axially excited cylindrical shell
- Asymptotic approximations for pure bending of thin cylindrical shells
- Elastic analyses of circular cylindrical shells by rod theory including distortion of cross-section
- Buckling and collapse of heavy tubes resting on a horizontal or inclined plane.
- The dynamic buckling problem caused by propagation of stress wave in elastic cylindrical shells under impact torque
- Postbuckling behavior and imperfection sensitivity of elastic structures by the Lyapunov-Schmidt-Koiter approach
- Instability in the transformation between extensional and flexural modes in thin-walled cylindrical shells
- Homoclinic and heteroclinic orbits underlying the post-buckling of axially-compressed cylindrical shells
- Some computational aspects of a group theoretic finite element approach to the buckling and postbuckling analyses of plates and shells of revolution
- Torsional buckling of spherical shells under circumferential shear loads
- Nonlinear buckling of torsion-loaded functionally graded cylindrical shells in thermal environment
- Nonlinear axisymmetric deformations of an elastic tube under external pressure
- Curvature tunes wrinkling in shells
- The buckling load of cylindrical shells under axial compression depends on the cross-sectional curvature
- A novel analytical study on the buckling of cylindrical shells subjected to arbitrarily distributed external pressure
- Electro-thermo-mechanical post-buckling of piezoelectric functionally graded cylindrical shells
- Surface effects on the buckling behaviors of piezoelectric cylindrical nanoshells using nonlocal continuum model
- Stress waves and dynamic buckling of functionally graded cylindrical shells under combined axial impact and thermal load
- Dynamic instability of a circular cylindrical shell carrying a top mass under base excitation: experiments and theory
- Effect of multiple localized geometric imperfections on stability of thin axisymmetric cylindrical shells under axial compression
- Measures to judge the sensitivity of thin-walled shells concerning stability under different loading conditions
- Elastic stability and imperfection sensitivity of axially loaded cylindrical shells on narrow supports
- Buckling in space and time
- Buckling of imperfect functionally graded cylindrical shells under axial compression
- Wrinkling and smoothing of a soft shell
- Closed-form solutions for the elastic-plastic buckling design of shell structures under external pressure
- Buckling of a double sector thin elastic plate: analytical solution
- Elastic buckling of an axially compressed open circular cylindrical shell
- Torsional buckling of functionally graded cylindrical shells with temperature-dependent properties
- Numerical and experimental study of buckling of advanced fiber composite cylinders under axial compression
- Quantified ``shock-sensitivity above the Maxwell load
- Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure
- Eigen-transitions in cantilever cylindrical shells subjected to vertical edge loads
- scientific article; zbMATH DE number 3858576 (Why is no real title available?)
- Helical buckling of thick-walled, pre-stressed, cylindrical tubes under a finite torsion
- scientific article; zbMATH DE number 4153990 (Why is no real title available?)
- The cascade structure of linear instability in collapsible channel flows
- Stability of Cylindrical Shells, by Various Nonlinear Shell Theories
- Delamination Buckling of Pressure-Loaded, Cross-Ply, Laminated Cylindrical Shells
- scientific article; zbMATH DE number 1189481 (Why is no real title available?)
- Buckling and post-buckling analyses for an axially compressed laminated cylindrical shell of FGM with PFRC in thermal environments
- On the accuracy of shell models for torsional buckling of carbon nanotubes
- scientific article; zbMATH DE number 44905 (Why is no real title available?)
- scientific article; zbMATH DE number 46591 (Why is no real title available?)
- Fully localized post-buckling states of cylindrical shells under axial compression
- Hybrid-mixed shell finite elements and implicit dynamic schemes for shell post-buckling
- On the role of localizations in buckling of axially compressed cylinders
- Maxwell tipping points: the hidden mechanics of an axially compressed cylindrical shell
- Post-buckling analysis of functionally graded multilayer graphene platelet reinforced composite cylindrical shells under axial compression
- Linear vibrations of triple-walled carbon nanotubes
- Prediction and control of buckling: the inverse bifurcation problems for von Karman equations
- Surface-tension-induced buckling of liquid-lined elastic tubes: a model for pulmonary airway closure
- Quasi-static buckling simulation of single-layer graphene sheets by the molecular mechanics method
- Adaptive Analysis of Bifurcation Points of Shell Structures
- W. T. Koiter’s Elastic Stability of Solids and Structures
- Scaling instability in buckling of axially compressed cylindrical shells
- Accurate buckling analysis of magneto-electro-elastic cylindrical shells subject to hygro-thermal environments
- Buckling of thin-walled cylinders from three dimensional nonlinear elasticity
- An elastically stabilized spherical invagination
- Hygrothermal effects on the nonlinear buckling of functionally graded multilayer GPL‐Fiber reinforced hybrid composite cylindrical shells
- Odd elastic stability of cylindrical shells
- Buckling of thin-walled cylindrical shell structures with axially variable elastic modulus under axial compression
- Thermo-mechanical buckling of CFRP cylindrical shells with FGPM coating
- Torsional buckling of functionally graded multilayer graphene nanoplatelet-reinforced cylindrical shells
- Post-buckling of magneto-electro-elastic porous functionally graded cylindrical shells with geometric imperfection
- A symplectic analytical approach for torsional buckling of cylindrical shells with asymmetric local defects
- A separation-of-variable method for eigenbuckling analysis of closed and open circular cylindrical shells
- Sloshing effects on supersonic flutter characteristics of a circular cylindrical shell partially filled with liquid
- Wind buckling analysis of cylindrical shells with various geometric imperfections
- Physically admissible and inadmissible exact localized solutions in problems of nonlinear wave dynamics of cylindrical shells
- Stress distributions and stiffness anisotropy of circumferentially corrugated shells under uniform external pressure
- Torsional buckling of elastic cylinders with hard coatings
- Elastically encapsulated core annular flow
- Degenerate asymptotic phenomena in the buckling of inhomogeneously pre-stressed cylindrical shells
- A novel solution to accurate nonlinear buckling analysis of truncated conical shells with shear deformation theory
- Nonlinear analytical buckling analysis of composite cylindrical shells under magneto-electro-mechanical coupling: the role of flexoelectric and flexomagnetic effects
- Dynamic stability and sensitivity to geometric imperfections of strongly compressed circular cylindrical shells under dynamic axial loads
- Buckling analysis of a lattice anisogrid cylindrical shell under torsion: application to design procedure
- Symplectic electrothermomechanical buckling solutions for two-dimensional decagonal piezoelectric quasicrystal cylindrical shells
- Behaviour of a thick circular slab after buckling
- A boundary layer theory for the buckling of thin cylindrical shells under external pressure
- Asymmetric bifurcations of thick-walled circular cylindrical elastic tubes under axial loading and external pressure
- On refined analysis of bifurcation buckling for the axially compressed circular cylinder
- Flow-induced deformation of an elastic membrane adhering to a wall
- Initial post-buckling of variable-stiffness curved panels
- Buckling patterns of shells and spherical honeycomb structures
- Singular perturbation analysis of the buckling of circular cylindrical shells
- Critical state of a thin-walled beam under combined load
- Homoclinic orbits in reversible systems and their applications in mechanics, fluids and optics
- Reduced-order models for large-amplitude vibrations of shells including in-plane inertia
This page was built for publication:
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q3334229)