scientific article; zbMATH DE number 3825358
From MaRDI portal
Publication:3670748
Cited in
(only showing first 100 items - show all)- Fluid flow and heat transfer characteristics of natural convection in square cavities due to discrete source-sink pairs
- Turbulent conjugate heat and mass transfer from the surface of a binary mixture of ethanol/iso-octane in a countercurrent stratified two-phase flow system
- Conjugate heat transfer by natural convection, conduction and radiation in open cavities
- Reduced order modeling and experimental validation of steady turbulent convection in connected domains
- Analysis of pulsating convection from two heat sources mounted with porous blocks
- Mathematical modelling of NABD release from endoluminal gel paved stent
- Transient two-dimensional model of frost formation on a fin-and-tube heat exchanger
- A numerical study of unsteady natural convection induced by iso-flux surface cooling in a reservoir model
- Experimental and numerical study of transient natural convection due to mass transfer in inclined enclosures
- Numerical simulation of parabolic trough solar collector: Improvement using counter flow concentric circular heat exchangers
- Transition to a periodic flow induced by a thin fin on the sidewall of a differentially heated cavity
- Simulation of turbulent impinging jet into a cylindrical chamber with and without a porous layer at the bottom
- Theoretical model for fast bubble growth in small channels with reference to startup of capillary pumped loops used in spacecraft thermal management systems
- Modeling of the heat transfer and flow features of the thermal plasma reactor with counter-flow gas injection
- Study on condensation heat transfer characteristics of wet paper in steam heating process
- Numerical heat transfer analysis of encapsulated ice thermal energy storage system with variable heat transfer coefficient in downstream
- Pulsating convective cooling across two porous-covering heated blocks
- Unsteady heat conduction involving phase changes for an irregular bubble/particle entrapped in a solid during freezing - an extension of the heat-balance integral method
- Heat transfer enhancement in self-sustained oscillatory flow in a grooved channel with oblique plates
- Adaptive phase field simulation of dendritic crystal growth in a forced flow: 2D vs 3D morphologies
- A comparison of hyperbolic and parabolic models of phase change of a pure metal
- Model of a porous regenerator used for magnetic refrigeration at room temperature
- Multi-Prandtl correlating equations for free convection heat transfer from a horizontal tube of elliptic cross-section
- Experimental and numerical investigation of the thermal effects during hydrogen charging in packed bed storage tank
- Analytical characterization of heat transport through biological media incorporating hyperthermia treatment
- Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor
- Magnetoconvection in an enclosure of water near its density maximum with soret and dufour effects
- Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding
- Thermodiffusion in porous media: Multi-domain constitutant separation
- An enhanced thermal conduction model for the prediction of convection dominated solid-liquid phase change
- Numerical study of the relationship between heat transfer enhancement and absolute vorticity flux along main flow direction in a channel formed by a flat tube bank fin with vortex generators
- Performance evaluation of mixed convection in an inclined square channel with uniform temperature walls
- Unsteady conjugate forced convection heat/mass transfer in ensembles of spherical particles with cell models
- Magnetoconvection in a square cavity with partially active vertical walls: Time periodic boundary condition
- A collocated finite volume scheme to solve free convection for general non-conforming grids
- Heat, air and moisture transfer through hollow porous blocks
- A cell-by-cell thermally driven mushy cell tracking algorithm for phase-change problems. II: Phase-change with natural connection.
- Explicit formulations and performance of LSFD method on Cartesian mesh
- A note on mixed convection of laminar plane water plumes at temperatures around the density extremum
- Convected element method for simulation of angiogenesis
- A composite grid solver for conjugate heat transfer in fluid-structure systems
- Effect of pulsed magnetic field on superalloy melt
- 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles. I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles
- Unsteady conjugate water/air mixed convection in a square cavity
- Formation of weld crater in GMAW of aluminum alloys
- Numerical simulation of concrete hollow bricks by the finite volume method
- On physics-based preconditioning of the Navier-Stokes equations
- Predictions of turbulent flow and heat transfer in gas-droplets flow downstream of a sudden pipe expansion
- Transient thermo-solutal convection of water near 4 \(^\circ \)C with opposing gradients in a square cavity
- Numerical simulation of thermal convection of viscoelastic fluids using the grid-by-grid inversion method
- A building corner model for hygrothermal performance and mould growth risk analyses
- Numerical simulation of diffusive processes in solids of revolution via the finite volume method and generalized coordinates
- Particle-gas reacting flow under concentrated solar irradiation
- Conduction and radiation in a rectangular isotropic scattering medium with black surfaces by the RTNAM
- A new turbulence model for porous media flows. II: Analysis and validation using microscopic simulations
- The effect of inlet constriction on bubble growth during flow boiling in microchannels
- Natural convection cooling of a localised heat source at the bottom of a nanofluid-filled enclosure
- Convective flow and heat transfer in a tall porous cavity side-cooled with temperature profile
- Unsteady 2D coupled heat and mass transfer in porous media with biological and chemical heat generations
- Characterization of a porous medium employing numerical tools: permeability and pressure-drop from Darcy to turbulence
- Hydromagnetic free convection of a radiating fluid
- A segregated formulation of Navier-Stokes equations with finite elements
- An approximation of source terms in gradient form for multiphase transport processes
- Numerical simulation of tidal residual flow by an explicit subdomain finite element method
- Applicability of the standard k-epsilon turbulence model to gas-stirred baths
- A boundary element analysis for convective diffusion problems adjacent to diffusion domains
- Flow field predictions in a model heat exchanger
- Turbulence-driven secondary flows in a curved pipe
- Theory of nonequilibrium inductive high-frequency discharge in a gas flow
- Zonal finite-volume computations of incompressible flows
- Full scale Reynolds number effects for the viscous flow around the ship stern
- Convective heat transfer in the entrance region of a rectangular duct with two indented sides
- The numerical simulation of turbulent flows of Newtonian and a sort of non-Newtonian fluid in 180-degree square sectioned bend
- Application of an adaptive grid procedure for the calculation of turbulent separated flows
- Towards a cost-effective ILU preconditioner with high level fill
- Multigrid technique applied to the compressible Euler equations
- An extended \(k-\varepsilon\) model for numerical simulation of wind flow around buildings
- Comparison of two-way coupling models for confined turbulent gas-particle jets in flash smelting
- Boundary layer over a slotted plate
- Numerical simulation of line puff via RNG \(k\epsilon\) model
- On diffusive methods and exponentially fitted techniques
- Numerical studies of three turbulent slot jets with and without moving surface
- Comparisons of two commercial computational fluid dynamics codes in modelling pulverised coal combustion for a 2. 5 MW burner
- Numerical study of disk driven rotating MHD flow of a liquid metal in a cylindrical enclosure
- Turbulent gravity current of lock release type: A numerical study
- Finite-element simulation of the start-up problem for a viscoelastic fluid in an eccentric rotating cylinder geometry using a third-order upwind scheme
- Box schemes on quadrilateral meshes
- On the practical advantages of the quasi-equilibrium version of the Mellor and Yamada level 2.5 turbulence closure applied to marine modelling
- An explicit finite volume method for viscoelastic fluid flows
- Modelling and simulation of natural convection flow in a saturated porous cavity
- Numerical solution of the incompressible, three-dimensional Navier-Stokes equations
- Ellipticity, accuracy, and convergence of the discrete Navier-Stokes equations
- Hypersonic viscous gas flow over a delta wing in the intermediate interaction regime with allowance for wake flow
- Steady and oscillatory buoyant thermocapillary convection
- Advances in control-volume-based finite-element methods for compressible flows
- Solution-adaptive techniques in computational heat transfer and fluid flow
- Mixed convective flow and heat transfer in a vertical helicoidal pipe with finite pitch
- Mixing of gases due to injection of a low-pressure jet into a cross-flow
- Iterative method for solving finite element systems of algebraic equations
- Solution of nonlinear curvature driven evolution of plane convex curves
This page was built for publication:
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q3670748)
