A simple error estimator and adaptive procedure for practical engineerng analysis

DOI10.1002/nme.1620240206zbMath0602.73063OpenAlexW2155395549MaRDI QIDQ3738683

No author found.

Publication date: 1987

Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1002/nme.1620240206

zbMATH Keywords

global energy norm errorerror estimatorlocal errors

Mathematics Subject Classification ID

Finite element methods applied to problems in solid mechanics (74S05) Error bounds for boundary value problems involving PDEs (65N15) Error bounds for initial value and initial-boundary value problems involving PDEs (65M15)

Related Items

On the a posteriori estimation of the modeling error for the heat conduction in a plate and its use for adaptive hierarchical modeling, Enhanced derivative recovery through least square residual penalty, Anisotropic mesh transformations and optimal error control, An a posteriori error estimate and adaptive refinement procedure for viscoelastic fluid flows: The modified upper-convected Maxwell model, An extension of shape sensitivity analysis to an immersed boundary method based on Cartesian grids, Validation of recipes for the recovery of stresses and derivatives by a computer-based approach, Agile structural analysis for fabrication-aware shape editing, An asymptotically exact, pointwise, a posteriori error estimator for linear, elliptic, one-dimensional problems with possible singularities in the solution, On the adaptive finite element method of steady-state rolling contact for hyperelasticity in finite deformations, A new \(h\)-adaptive refinement scheme for the boundary element method using local reanalysis, A new hybrid adaptive mesh algorithm based on Voronoi tessellations and equi-distribution principle: algorithms and numerical experiments, Nodal sensitivities as error estimates in computational mechanics, An error indicator for finite difference methods using spectral techniques with application to aerofoil simulation, An adaptive node regeneration technique for the efficient solution of elasticity problems using MDLSM method, A posteriori error estimation for elasto-plastic problems based on duality theory, Transfer operators for evolving meshes in small strain elasto-plasticity, Structured mesh refinement in MLS-based numerical manifold method and its application to crack problems, \(C^1\)-continuous stress recovery in finite element analysis, Adaptive Lagrangian modelling of ballistic penetration of metallic targets, A posteriori error estimation in finite element analysis, 3D mesh adaptation. Optimization of tetrahedral meshes by advancing front technique, Adaptive \(hpq\)-finite element methods of hierarchical models for plate- and shell-like structures, Superconvergence and \textit{a posteriori} error estimates of the DG method for scalar hyperbolic problems on Cartesian grids, A robust numerical procedure for the thermomechanical flow simulation of friction stir welding process using an adaptive element-free Galerkin method, Modeling and simulation of kinked cracks by virtual node XFEM, An enhanced-strain error estimator for Galerkin meshfree methods based on stabilized conforming nodal integration, Adjoint-based functional correction for unstructured mesh finite volume methods, Anisotropic meshes and stabilization parameter design of linear SUPG method for 2D convection-dominated convection-diffusion equations, An adaptive finite element procedure for fully-coupled point contact elastohydrodynamic lubrication problems, Magnetic force and torque on particles subject to a magnetic field, An \(h\)-adaptive SUPG-FEM solution of the pure advection equation, An a posteriori error estimate for finite element approximations of a singularly perturbed advection-diffusion problem, A multilevel correction method for interior transmission eigenvalue problem, Automatic triangular mesh generation of trimmed parametric surfaces for finite element analysis, A posteriori error estimation for nonlinear variational problems by duality theory, An adaptive mesh refinement algorithm for the radiative transport equation, The finite element patch test revisited. A computer test for convergence, validation and error estimates, Error transport equation boundary conditions for the Euler and Navier-Stokes equations, Averaging techniques for reliable a posteriori FE error control in elastoplasticity with hardening, A-posteriori error estimation for the finite point method with applications to compressible flow, Modeling of impact problems using an \(h\)-adaptive, explicit Lagrangian finite element method in three dimensions., Accuracy and optimal meshes in finite element computation for nearly incompressible materials, Multigrid methods and adaptive refinement techniques in elliptic problems by finite element methods, Spatial mesh adaptation in semidiscrete finite element analysis of linear elastodynamic problems, Automatic two- and three-dimensional mesh generation based on fuzzy knowledge processing, On the asymptotic exactness of Bank-Weiser's estimator, The computation of three-dimensional flows using unstructured grids, Recent experiences with error estimation and adaptivity. II: Error estimation for \(h\)-adaptive approximations on grids of triangles and quadrilaterals, A least square principle for the a posteriori computation of finite element approximation errors, Recent experiences with error estimation and adaptivity. I: Review of error estimators for scalar elliptic problems, Adaptive remeshing for three-dimensional compressible flow computations, Modeling and computation of shakedown problems for nonlinear hardening materials, Adaptive analysis of 3D cavity flow using hierarchical mesh, A review of some a posteriori error estimates for adaptive finite element methods, Sharp upper global a posteriori error estimates for nonlinear elliptic variational problems, Adaptive finite-volume solution of complex turbulent flows, Precursor simulations in spreading using a multi-mesh adaptive finite element method, Reuse, recycle, reduce (3R) - strategies for the calculation of transient magnetic fields, On finite element modelling of surface tension. Variational formulation and applications. II: Dynamic problems, A comparison of mapping algorithms for hierarchical adaptive FEM in finite elasto-plasticity, On the duality of finite element discretization error control in computational Newtonian and Eshelbian mechanics, Goal-oriented error estimates based on different FE-spaces for the primal and the dual problem with applications to fracture mechanics, An automatic adaptive refinement procedure for the reproducing kernel particle method. II: Adaptive refinement, An automatic adaptive refinement procedure for the reproducing kernel particle method. I: Stress recovery and a posteriori error estimation, Error-controlled adaptive mixed finite element methods for second-order elliptic equations, PZ: An object oriented environment for scientific programming, A posteriori error estimator and adaptive procedures for computation of shakedown and limit loads on pressure vessels, Coupled model- and solution-adaptivity in the finite element method, A posteriori error estimation -- the relationship between different procedures, Computational aspects of disturbed state constitutive models, Adaptive finite element techniques for frictional contact problems involving large elastic strains, A combined \(r-h\) adaptive strategy based on material forces and error assessment for plane problems and bimaterial interfaces, Verified predictions of shape sensitivities in wall-bounded turbulent flows by an adaptive finite-element method, A posteriori error analysis using the constitutive law for the Crouzeix-Raviart element, Derivative recovery and a posteriori error estimate for extended finite elements, Error-controlled adaptive goal-oriented modeling and finite element approximations in elasticity, The ultraconvergence of derivative for bicubic finite element, Adaptive FEM analysis of selected elastic-visco-plastic problems, Adaptive domain decomposition for the bound method: application to the incompressible Navier-Stokes and energy equations in three space dimensions, Adaptive mesh refinement computation of solidification microstructures using dynamic data structures, An adaptive algorithm for the Crank-Nicolson scheme applied to a time-dependent convection-diffusion problem, Adaptive finite element computational fluid dynamics using an anisotropic error estimator, A posteriori error estimation for unilateral contact with matching and non-matching meshes, Development of a CAE system based on the node-by-node meshless method, \(\Re\)-parameter: a local truncation error based adaptive framework for finite volume compressible flow solvers, Analysis of the superconvergent patch recovery technique and a posteriori error estimator in the finite element method. I., An adaptive finite element algorithm for a two-dimensional stationary Stefan-like problem, Enhanced linear triangle for plasticity problems in \(J_2^\prime\) solids, Composite mesh concept based FEM error estimation and solution improvement, Three-dimensional welding analysis using an adaptive mesh scheme, On constructing accurate recovered stress fields for the finite element solution of Reissner-Mindlin plate bending problems, Adaptive CFD analysis for rotorcraft aerodynamics, A universal formulation of two-equation models for adaptive computation of turbulent flows, A comparison of three error estimation techniques for finite volume solutions of compressible flows, A fast \(hp\) adaptive finite element mesh design, Adjoint error estimation and grid adaptation for functional outputs: Application to quasi-one-dimensional flow, A numerical study of a posteriori error estimators for convection-diffusion equations, Petrov-Galerkin solutions of the incompressible Navier-Stokes equations in primitive variables with adaptive remeshing, Different a posteriori error estimators and indicators for contact problems., Grid adaptation for functional outputs: application to two-dimensional inviscid flows, Reliable averaging for the primal variable in the Courant FEM and hierarchical error estimators on red-refined meshes, A posteriori error estimation for acoustic wave propagation problems, Strict error bounds for linear solid mechanics problems using a subdomain-based flux-free method, On some \(hp\)-adaptive finite element method for natural vibrations, Axioms of adaptivity, Adaptive boundary element methods. A posteriori error estimators, adaptivity, convergence, and implementation, Adaptive multistep time discretization and linearization based on a posteriori error estimates for the Richards equation, Remarks on a posteriori error estimation for finite element solutions, Metric tensors for the interpolation error and its gradient in \(L^p\) norm, Efficient recovery-based error estimation for the smoothed finite element method for smooth and singular linear elasticity, Goal-oriented explicit residual-type error estimates in XFEM, A parameter-free smoothness indicator for high-resolution finite element schemes, Guaranteed and fully robust a posteriori error estimates for conforming discretizations of diffusion problems with discontinuous coefficients, Adaptive error control in multi-physical thin-structure MEMS FE-simulation, Efficient finite element methodology based on Cartesian grids: application to structural shape optimization, On efficient simulation of non-Newtonian flow in saturated porous media with a multigrid adaptive refinement solver, Modeling of cohesive crack growth using an adaptive mesh refinement via the modified-SPR technique, Elasto-plasticity model in structural optimization of composite materials with periodic microstructures, Higher order optimization and adaptive numerical solution for optimal control of monodomain equations in cardiac electrophysiology, An isogeometrical approach to error estimation and stress recovery, A posteriori estimates for a natural Neumann-Neumann domain decomposition algorithm on a unilateral contact problem, A posteriori error estimates for viscous flow problems with rotation, Functional approach to a posteriori error estimation for elliptic optimal control problems with distributed control, Fast \(r\)-adaptivity for multiple queries of heterogeneous stochastic material fields, Strict upper and lower bounds of stress intensity factors at 2D elastic notches based on constitutive relation error estimation, Computation of dendritic growth with level set model using a multi-mesh adaptive finite element method, The superconvergent cluster recovery method, Adaptive finite elements for a certain class of variational inequalities of second kind, A meshless method based on boundary integral equations and radial basis functions for biharmonic-type problems, Three dimensional automatic refinement method for transient small strain elastoplastic finite element computations, Refined \(h\)-adaptive finite element procedure for large deformation geotechnical problems, 3D metric-based anisotropic mesh adaptation for vortex capture, On (essentially) non-oscillatory discretizations of evolutionary convection-diffusion equations, Guaranteed error bounds on pointwise quantities of interest for transient viscodynamics problems, An enhanced method with local energy minimization for the robust a posteriori construction of equilibrated stress fields in finite element analyses, An a-posteriori error estimator for linear elastic fracture mechanics using the stable generalized/extended finite element method, A type of multi-level correction scheme for eigenvalue problems by nonconforming finite element methods, An explicit finite element approach with patch projection technique for strain gradient plasticity formulations, A fully optimal anisotropic mesh adaptation method based on a hierarchical error estimator, A mixed finite element scheme for optimal control problems with pointwise state constraints, Error estimation and adaptivity in Navier-Stokes incompressible flows, A node enrichment adaptive refinement in discrete least squares meshless method for solution of elasticity problems, Adaptive simulation of two dimensional hyperbolic problems by collocated discrete least squares meshless method, Fast estimation of discretization error for FE problems solved by domain decomposition, Adaptive space and time numerical simulation of reaction-diffusion models for intracellular calcium dynamics, A self-adaptive h-refinement technique for the boundary element method, Error assessment and mesh adaptivity for regularized continuous failure models, A strict error bound with separated contributions of the discretization and of the iterative solver in non-overlapping domain decomposition methods, An adaptive edge finite element method for electromagnetic cloaking simulation, Adaptive finite elements using hierarchical mesh and its application to crack propagation analysis, Superconvergence patch recovery for the gradient of the tensor-product linear triangular prism element, Adaptive anisotropic meshing for steady convection-dominated problems, Lossy compression in optimal control of cardiac defibrillation, Accurate recovery-based upper error bounds for the extended finite element framework, Correction: ``Abstract elliptic operators appearing in atmospheric dispersion, A variational multiscale a posteriori error estimation method for mixed form of nearly incompressible elasticity, Goal-oriented \(r\)-adaptivity based on variational arguments in the physical and material spaces, Adaptive finite element analysis of elliptic problems based on bubble-type local mesh generation, A generic grid interface for parallel and adaptive scientific computing. II: Implementation and tests in DUNE, Gradient superconvergence post-processing of the tensor-product quadratic pentahedral finite element, Anisotropic error control for environmental applications, An anisotropic unstructured triangular adaptive mesh algorithm based on error and error gradient information, Meshless finite difference method with higher order approximation -- applications in mechanics, Error assessment in structural transient dynamics, Multilevel iterative solution and adaptive mesh refinement for mixed finite element discretizations, Strict upper bounds of the error in calculated outputs of interest for plasticity problems, Computable bounds of functional outputs in linear visco-elastodynamics, Adaptive numerical simulation of intracellular calcium dynamics using domain decomposition methods, Two-sided a posteriori error estimates for linear elliptic problems with mixed boundary conditions., Basic problems of a posteriori error estimation, Adaptive recovery of near optimal meshes in the finite element method for parameter dependent problems, Adaptive finite element methods in computational mechanics, Geometrical interpretation for error estimation in finite element analysis, The superconvergent patch recovery (SPR) and adaptive finite element refinement, Automatic adaptive remeshing for numerical simulations of metal forming, \(h\)-and \(d\)-adaptive FE methods for two-dimensional structural problems including post-buckling of shells, Error estimation and adaptivity in elastodynamics, Meshless methods: a review and computer implementation aspects, Goal-oriented mesh adaptation for flux-limited approximations to steady hyperbolic problems, Towards the development of an \(h\)-\(p\)-refinement strategy based upon error estimate sensitivity, Adaptive numerical method for Poisson-Boltzmann equation and its application, An efficient adaptive analysis procedure for node-based smoothed point interpolation method (NS-PIM), Goal-oriented \(h\)-adaptivity for the Helmholtz equation: error estimates, local indicators and refinement strategies, Deformation and localization analysis of partially saturated soil, On Zienkiewicz--Zhu error estimators for Maxwell's equations, Development of a parallel Poisson's equation solver with adaptive mesh refinement and its application in field emission prediction, An anisotropic adaptive finite element algorithm for transonic viscous flows around a wing, Adaptive ANCF method and its application in planar flexible cables, A mesh adaptivity scheme on the Landau-de Gennes functional minimization case in 3D, and its driving efficiency, Linear and non-linear high order accurate residual distribution schemes for the discretization of the steady compressible Navier-Stokes equations, Superconvergence property of an over-penalized discontinuous Galerkin finite element gradient recovery method, Adaptive finite element mesh triangulation using self-organizing neural networks, Monotonicity-preserving finite element schemes with adaptive mesh refinement for hyperbolic problems, A locally refined adaptive isogeometric analysis for steady-state heat conduction problems, Error analysis for quadtree-type mesh coarsening algorithms adapted to pixelized heterogeneous microstructures, Mesh adaptations for linear 2D finite-element discretizations in structural mechanics, especially in thin shell analysis, The three R's of engineering analysis and error estimation and adaptivity, A posteriori error estimation, Polynomial preserving recovery of an over-penalized symmetric interior penalty Galerkin method for elliptic problems, Recovery-based error estimator for the discontinuous Galerkin method for nonlinear scalar conservation laws in one space dimension, Unnamed Item, Reliability and efficiency of an anisotropic Zienkiewicz-Zhu error estimator, The multiscale approach to error estimation and adaptivity, On mesh refinement procedures for the virtual element method for two-dimensional elastic problems, On an inexact gradient method using proper orthogonal decomposition for parabolic optimal control problems, Unnamed Item, A recovery-based a posteriori error estimator for \(H\)(curl) interface problems, Optimal shape design of axisymmetric structures subject to asymmetric loading, Development of an object-oriented finite element program with adaptive mesh refinement for multi-physics applications, A stabilized finite element method for incompressible flow and heat transfer: A natural derivation based on the use of local time-steps, Adaptive variational multiscale methods for incompressible flow based on two local Gauss integrations, Superconvergent pseudostress-velocity finite element methods for the Oseen equations, Proper intrinsic scales for a posteriori multiscale error estimation, On some new recovery-based a posteriori error estimators, Anisotropic adaptive finite elements for an elliptic problem with strongly varying diffusion coefficient, Bloch theory-based gradient recovery method for computing topological edge modes in photonic graphene, Anisotropic mesh adaptation for region-based segmentation accounting for image spatial information, Pointwise dual weighted residual based goal-oriented \textit{a posteriori} error estimation and adaptive mesh refinement in 2D/3D thermo-mechanical multifield problems, Adaptive multigrid method using duality in plane elasticity, Application of PHT-splines in bending and vibration analysis of cracked Kirchhoff -- Love plates, A configurational force for adaptive re-meshing of gradient-enhanced poromechanics problems with history-dependent variables, Crack growth adaptive XIGA simulation in isotropic and orthotropic materials, Hierarchical a posteriori error estimation of Bank-Weiser type in the FEniCS project, Decay rates of adaptive finite elements with Dörfler marking, Gradient recovery based a posteriori error estimator for the adaptive direct discontinuous Galerkin method, \(h\)- and \(p\)-adaptivity driven by recovery and residual-based error estimators for PHT-splines applied to time-harmonic acoustics, POD-assisted strategies for structural topology optimization, Enhancing level set-based topology optimization with anisotropic graded meshes, Recovery by discretization corrected particle strength exchange (DC PSE) operators, Mesh adaptation-aided image segmentation, Using C++ templates to implement finite element classes, Subdomain-based error techniques for generalized finite element approximations of problems with singular stress fields, Recovery-based error estimators for the VEM and BEM-based FEM, Fast validation of stochastic structural models using a PGD reduction scheme, Gradient‐based refinement indicators in adaptive finite element analysis with special reference to sheet metal forming, A quadrilateral mesh generator for adaptive procedures in bulk forming processes, Discretization error control for constrained aerodynamic shape optimization, An adaptive finite element/meshless coupled method based on local maximum entropy shape functions for linear and nonlinear problems, Adaptive boundary element methods for the computation of the electrostatic capacity on complex polyhedra, ZZ-type a posteriori error estimators for adaptive boundary element methods on a curve, Improved ZZ a posteriori error estimators for diffusion problems: discontinuous elements, Optimal superconvergence and asymptotically exact \textit{a posteriori} error estimator for the local discontinuous Galerkin method for linear elliptic problems on Cartesian grids, Adaptive remeshing based on a posteriori error estimation for forging simulation, Adaptive refinement techniques based on tetrahedral and hexahedral grids for finite element analysis of mold filling in casting processes, Adaptive finite elements with large aspect ratio based on an anisotropic error estimator involving first order derivatives, Verification of stochastic models in uncertain environments using the constitutive relation error method, A hierarchically enhanced recovery-based error estimator for bidimensional elastoplastic modelling by generalized finite element approach, Extended isogeometric analysis using B++ splines for strong discontinuous problems, Comparative study of multiscale computational strategies for materials with discrete microstructures, Modelling and simulation of machining processes, Probabilistic analysis of linear elastic cracked structures, A higher-order finite element method with unstructured anisotropic mesh adaption for two phase flows with surface tension, A hybrid potential of mean force approach for simulation of fracture in heterogeneous media, An ALE formulation based on spatial and material settings of continuum mechanics. II: Classification and applications, A posteriori error estimation of goal-oriented quantities for elliptic type BVPs, Adaptivity in linear elastic fracture mechanics based on shape sensitivity analysis, A posteriori error estimators, gradient recovery by averaging, and superconvergence, On the development of adaptive random differential quadrature method with an error recovery technique and its application in the locally high gradient problems, An adjoint method for shape optimization in unsteady viscous flows, Adaptive space-time finite element methods for the wave equation on unbounded domains, A finite element formulation for transient incompressible viscous flows stabilized by local time-steps, Partitioning methods for reaction-diffusion problems, A posteriori error estimates for approximate solutions of linear parabolic problems, Contribution of computational mechanics in numerical simulation of machining and blancking: state-of-the-art, Goal-oriented error estimation for beams on elastic foundation with double shear effect, Mesh adaptivity driven by goal-oriented locally equilibrated superconvergent patch recovery, Goal-oriented space-time adaptivity for transient dynamics using a modal description of the adjoint solution, Curl recovery for the lowest order rectangular edge element, Robust equilibrated a posteriori error estimator for higher order finite element approximations to diffusion problems, Strict upper and lower bounds for quantities of interest in static response sensitivity analysis, An efficient adaptive analysis procedure using the edge-based smoothed point interpolation method (ES-PIM) for 2D and 3D problems, Strong-form approach to elasticity: hybrid finite difference-meshless collocation method (FDMCM), A posteriori error estimates and adaptive procedures for the meshless Galerkin boundary node method for 3D potential problems, Convergence analysis and detection of singularities within a boundary meshless method based on Taylor series, 3-D local mesh refinement XFEM with variable-node hexahedron elements for extraction of stress intensity factors of straight and curved planar cracks, Improved ZZ a posteriori error estimators for diffusion problems: conforming linear elements, Implicit a posteriori error estimation in cut finite elements, An extended cohesive damage model for simulating arbitrary damage propagation in engineering materials, Superconvergent patch recovery and a posteriori error estimation technique in adaptive isogeometric analysis, Calibration experimental design considering field response and model uncertainty, Error-controlled adaptive extended finite element method for 3D linear elastic crack propagation, Error indicators for incompressible Darcy flow problems using enhanced velocity mixed finite element method, On the coupling of local multilevel mesh refinement and ZZ methods for unilateral frictional contact problems in elastostatics, Residual error based adaptive mesh refinement with the non-intrusive patch algorithm, Projection and transfer operators in adaptive isogeometric analysis with hierarchical B-splines, A novel and simple a posteriori error estimator for LMS methods under the umbrella of GSSSS framework: adaptive time stepping in second-order dynamical systems, Polynomial preserving recovery for a class of weak Galerkin finite element methods, Original geometrical stopping criteria associated to multilevel adaptive mesh refinement for problems with local singularities, Novel quadtree algorithm for adaptive analysis based on cell-based smoothed finite element method, An adaptive Petrov-Galerkin formulation for the compressible Euler and Navier-Stokes equations, A subdomain residual method for a posteriori error estimates of finite element solutions of viscoelastic fluid flows, Estimated error bounds for finite element solutions of elliptic boundary value problems, Error indicators for mixed finite elements in 2-dimensional linear elasticity, A conforming DG method for linear nonlocal models with integrable kernels, On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials, The background of error estimation and adaptivity in finite element computations, Goal-oriented a posteriori error estimates in linear elastic fracture mechanics, Upper bounds of the error in local quantities using equilibrated and compatible finite element solutions for linear elastic problems, Error estimation and mesh adaptivity in incompressible viscous flows using a residual power approach, Energy norm based error estimators for adaptive BEM for hypersingular integral equations, A unified framework for the computational comparison of adaptive mesh refinement strategies for all-quadrilateral and all-hexahedral meshes: locally adaptive multigrid methods versus h-adaptive methods, New approach for automation of finite element analysis, A new methodology for anisotropic mesh refinement based upon error gradients, \(r\)-adaptive mesh generation for shell finite element analysis, Adaptivity for clustering-based reduced-order modeling of localized history-dependent phenomena, Parallel adaptive finite element computations with hierarchical preconditioning, An adaptive finite element algorithm for contact problems in plasticity, A variational method for finite element stress recovery and error estimation, A survey of parametrized variational principles and applications to computational mechanics, Recovery and few parameter representation of the optimal mesh density function for near optimal finite element meshes, Finite element derivative recovery by moving least square interpolants, An automatic procedure with a control of accuracy for finite element analysis in 2D elasticity, A parallel adaptive strategy for \(hp\) finite element computations, On error estimator and adaptivity in the meshless Galerkin boundary node method, An a posteriori error indicator for Coulomb's frictional contact, A three-dimensional adaptive analysis using the meshfree node-based smoothed point interpolation method (NS-PIM), Polynomial preserving recovery for high frequency wave propagation, Selected computational aspects of the meshless finite difference method, A simple anisotropic mesh-refinement strategy for triangular elements in 2D, Finite beam elements based on Legendre polynomial expansions and node-dependent kinematics for the global-local analysis of composite structures, An asymptotically exact finite element error estimator based on \(C^1\) stress recovery, Error estimation and adaptive meshing in strongly nonlinear dynamic problems, Computational techniques applied to high-speed machining under adiabatic strain localization conditions, An adaptive variational procedure for the conservative and positivity preserving Allen-Cahn phase-field model, Adaptive finite element analysis of fractal interfaces in contact problems, Error estimation including pollution assessment for nonlinear finite element analysis, An a posteriori finite element error analysis for the Stokes equations, An adaptive finite element approach to atomic-scale mechanics. -- The quasicontinuum method, An improved variational method for finite element stress recovery and a posteriori error estimation, A posteriori error estimation for standard finite element analysis, Implementation and adaptivity of a space-time finite element method for structural dynamics, A posteriori error estimation and adaptivity for linear elasticity using the reciprocal theorem, Fully reliable error control for first-order evolutionary problems, Anisotropic mesh adaptation for the generalized Ambrosio-Tortorelli functional with application to brittle fracture, Adaptive RBF-FD method for elliptic problems with point singularities in 2D, Adaptive extended isogeometric analysis based on PHT-splines for thin cracked plates and shells with Kirchhoff-Love theory, Variational multiscale error estimators for the adaptive mesh refinement of compressible flow simulations, A hybrid a posteriori error estimator for conforming finite element approximations, Adaptive multi-patch isogeometric analysis based on locally refined B-splines, A posteriori error estimators for stabilized finite element approximations of an optimal control problem, Adaptive stopping criterion for iterative linear solvers combined with anisotropic mesh adaptation, application to convection-dominated problems, Fracture modeling with the adaptive XIGA based on locally refined B-splines, Discrete inclusion models for reinforced composites: comparative performance analysis and modeling challenges, Quantifying discretization errors for soft tissue simulation in computer assisted surgery: a preliminary study, Some a posteriori error bounds for numerical solutions of plate in bending problems, \(p\)-adaptive refinement based on stress recovery technique considering ordinary Kriging interpolation in L-shaped domain, Simple a posteriori error estimators in adaptive isogeometric analysis, Adaptive refinement in the meshless finite volume method for elasticity problems, An automatic node-adaptive scheme applied with a RBF-collocation meshless method, Parallel and space-time adaptivity for the numerical simulation of cardiac action potentials, A robust a posteriori error estimate for the Fortin-Soulie finite element method, A separated representation of an error indicator for the mesh refinement process under the proper generalized decomposition framework, Performance analysis tools applied to a finite element adaptive mesh free boundary seepage parallel algorithm, An optimization algorithm for automatic structural design, Adaptive analysis using scaled boundary finite element method in 3D, Finite element procedures for computing normals and mean curvature on triangulated surfaces and their use for mesh refinement, Superconvergent flux recovery of the Rannacher-Turek nonconforming element, Error estimation for the polygonal finite element method for smooth and singular linear elasticity, A sharp interface isogeometric solution to the Stefan problem, High-order linear and non-linear residual distribution schemes for turbulent compressible flows, Variational multiscale a posteriori error estimation for systems. Application to linear elasticity, A unified approach to strict upper and lower bounds of quantities in linear elasticity based on constitutive relation error estimation, A locally conservative stress recovery technique for continuous Galerkin FEM in linear elasticity, An improved node moving technique for adaptive analysis using collocated discrete least squares meshless method, Robust recovery-type \textit{a posteriori} error estimators for streamline upwind/Petrov Galerkin discretizations for singularly perturbed problems, A recovery-explicit error estimator in energy norm for linear elasticity, Conservative Galerkin methods for dispersive Hamiltonian problems, An efficient automatic adaptive algorithm for cohesive crack propagation modeling of concrete structures using matrix-free unstructured Galerkin finite volume method, Residual estimates for post-processors in elliptic problems, On the derivation of guaranteed and \(p\)-robust a posteriori error estimates for the Helmholtz equation, An automatic adaptive meshing technique for Delaunay triangulations, A full 3D finite element analysis using adaptive refinement and PCG solver with back interpolation, A review and comparative study of upwind biased schemes for compressible flow computation. III: Multidimensional extension on unstructured grids., A space-time adaptive algorithm to illustrate the lack of collision of a rigid disk falling in an incompressible fluid, A tutorial in elementary finite element error analysis: A systematic presentation of a priori and a posteriori error estimates, A new a posteriori error estimation for nonlinear time-dependent finite element analysis, A posteriori error estimation of steady-state finite element solutions of the Navier-Stokes equations by a subdomain residual method, Adaptive methods for hybrid equilibrium finite element models, Error through the constitutive relation for beam and \(C^0\) plate finite elements: Static and vibration analyses, Recovery procedures in error estimation and adaptivity. I: Adaptivity in linear problems, Recovery procedures in error estimation and adaptivity. II: Adaptivity in nonlinear problems of elasto-plasticity behaviour, Constitutive relation error estimator for transient finite element analysis, A unified approach to remeshing strategies for finite element \(h\)-adaptivity, Constitutive relation error estimators for (visco)plastic finite element analysis with softening, On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications, A posteriori error estimation and mesh adaptation for finite element models in elasto-plasticity, A review of a posteriori error estimation techniques for elasticity problems, The relationship of some a posteriori estimators, An anisotropic recovery-based error estimator for adaptive discontinuous Galerkin methods, A posteriori error estimates of spectral approximations for second order partial differential equations in spherical geometries, Identity for deviations from the exact solution of the problem \( \Lambda^\ast\mathcal{A}\Lambda u + \ell = 0\) and its implications, Optimal shape design in biomimetics based on homogenization and adaptivity, Parallel space-time adaptive numerical simulation of 3D cardiac electrophysiology, An anisotropic adaptive method for the numerical approximation of orthogonal maps, Fully automatic multigrid adaptive mesh refinement strategy with controlled accuracy for nonlinear quasi-static problems, One step forward towards the full integration of BEM and CAD software: an effective adaptive approach, Mesh adaptivity in the framework of the Cartesian grid finite element method, cgFEM, Patient-specific bone organ modeling using CT based FEM, Polynomial preserving recovery and a posteriori error estimates for the two-dimensional quad-curl problem, Evaluation of the local quality of stresses in 3D finite element analysis., Robust residual- and recovery-based a posteriori error estimators for interface problems with flux jumps, Unified primal formulation-based a priori and a posteriori error analysis of mixed finite element methods, On the use of sensitivity analysis in model reduction to predict flows for varying inflow conditions, Robusta posteriorierror estimates for finite element discretizations of the heat equation with discontinuous coefficients, Flexible patch post-processing recovery strategies for solution enhancement and adaptive mesh refinement, Error bounds for the reliability index in finite element reliability analysis, On the need for the use of error-controlled finite element analyses in structural shape optimization processes, On the techniques for constructing admissible stress fields in model verification: Performances on engineering examples, An explicit residual-type error estimator for Q1-quadrilateral extended finite element method in two-dimensional linear elastic fracture mechanics, Supercloseness and superconvergence of stabilized low-order finite element discretizations of the Stokes Problem, A Posteriori Error Estimation for Computational Fluid Dynamics: The Variational Multiscale Approach, Unnamed Item, DISPERSION ANALYSIS OF AN ENERGY-ORTHOGONAL THIN PLATE FINITE ELEMENT, Patch-averaged assumed strain finite elements for stress analysis, Linear finite element superconvergence on simplicial meshes, Adaptive mesh refinement and coarsening for cohesive zone modeling of dynamic fracture, Enriched space-time finite element method: a new paradigm for multiscaling from elastodynamics to molecular dynamics, On a new edge-based gradient recovery technique, Relaxed error control in shape optimization that utilizes remeshing, Goal-oriented adaptive refinement for phase field modeling with finite elements, Modal-based goal-oriented error assessment for timeline-dependent quantities in transient dynamics, A traction-based equilibrium finite element free from spurious kinematic modes for linear elasticity problems, Constant-free explicit error estimator with sharp upper error bound property for adaptive FE analysis in elasticity and fracture, Exact 3D boundary representation in finite element analysis based on Cartesian grids independent of the geometry, Seamless-domain method: a meshfree multiscale numerical analysis, A unified approach for elasto-plastic FEM simulations, incorporating adaptive spatial and time discretization, Error control schemes for adaptive time integration of magnetodynamic systems with variable spatial mesh resolution, Using fuzzy controllers as adaptive procedures in the finite element method, Ana posteriorierror analysis of adaptive finite element methods for distributed elliptic control problems with control constraints, A spatially adaptive grid refinement scheme for the finite element solution of a second order obstacle problem, Numerical analysis of two-dimensional motion of a freely falling circular cylinder in an infinite fluid, Unnamed Item, Unnamed Item, Optimization of geometrically non‐linear structures based on a multi‐point approximation method and adaptivity, Simulation model for hot and cold forging by mixed methods including adaptive mesh refinement, Predicted natural frequencies of two‐dimensional elastodynamic problems: a practical error estimator, Error estimation in finite element transient dynamic analysis using modal superposition, An adaptive meshing automatic scheme based on the strain energy density function, Adaptive FAS‐multigrid method for nonlinear elliptic equations on unstructured grids, A posteriori error control in low-order finite element discretisations of incompressible stationary flow problems, On the use of anisotropica posteriorierror estimators for the adaptative solution of 3D inviscid compressible flows, A constitutive relation error estimator based on traction-free recovery of the equilibrated stress, Error estimation and adaptivity for discontinuous failure, Two- and three-dimensional transition element families for adaptive refinement analysis of elasticity problems, Pacing CFD: automatic mesh adaptation as an efficient tool to improve CFD accuracy, Finite‐element modeling of dry sliding wear in metals, Enhancing structural topology optimization, Skipping transition conditions ina posteriorierror estimates for finite element discretizations of parabolic equations, Parallel adaptive solution of coupled Rayleigh-Bénard-Marangoni problems with the Navier-slip, Adaptive Finite Element Solution of Variational Inequalities with Application in Contact Problems, Nonnested multigrid methods for linear problems, An adaptive displacement/pressure finite element scheme for treating incompressibility effects in elasto-plastic materials, A variationally consistent mesh adaptation method for triangular elements in explicit Lagrangian dynamics, An anisotropic Zienkiewicz-Zhu-type error estimator for 3D applications, Numerical simulation of multiple crack growth in brittle materials with adaptive remeshing, Unification of stress intensity factor (SIF) extraction methods with an h-adaptive finite element scheme, Unnamed Item, Unnamed Item, 3D adaptive mesh refinement, On solving nearly incompressible 2D problems using an adaptive refinement procedure, Application of a hexahedral mesh compression method in a 3D hot forging process for efficient analysis of a flash, Localised FE-analysis of Strang's problem based on Lagrange techniques, Efficiency considerations in triangular adaptive mesh refinement, Adaptive finite elements with large aspect ratio for mass transport in electroosmosis and pressure-driven microflows, Time‐ and space‐adaptive methods applied to localization phenomena in empty and saturated micropolar and standard porous materials, Dual adaptive finite element refinement for multiple local quantities in linear elastostatics, Adaptive tetrahedral mesh generation by constrained Delaunay refinement, Automatic adaptive FE analysis of thin-walled structures using 3D solid elements, Nodal velocity derivatives of finite element solutions: The FiND method for incompressible Navier-Stokes equations, A recovery-type error estimator for the extended finite element method based onsingular+smoothstress field splitting, A posteriorierror estimation for extended finite elements by an extended global recovery, Comparison of hp‐adaptive methods in finite element electromagnetic wave propagation, Adaptive analysis in elastoplasticity based on an enhanced error in constitutive relation, BLURRED MAXIMAL CYCLICALLY MONOTONE SETS AND BIPOTENTIALS, On the control of the load increments for a proper description of multiple delamination in a domain decomposition framework, Convergence, adaptive refinement, and scaling in 1D peridynamics, Estimates of deviations from exact solutions for boundary-value problems with incompressibility condition, Adaptive analysis using the node-based smoothed finite element method (NS-FEM), On the Crank-Nicolson anisotropic a posteriori error analysis for parabolic integro-differential equations, A Performance Study on Configurational Force and Spring-Analogy Based Mesh Optimization Schemes, The backward euler anisotropic a posteriori error analysis for parabolic integro-differential equations, Guaranteed and robusta posteriorierror estimates for singularly perturbed reaction–diffusion problems, TANGENTIAL-DISPLACEMENT AND NORMAL–NORMAL-STRESS CONTINUOUS MIXED FINITE ELEMENTS FOR ELASTICITY, An adaptive edge-based smoothed point interpolation method for mechanics problems, Energy Based Adaptive Strategy for Plates and Laminates, Upper Bound for the Approximation Error for the Kirchhoff-Love Arch Problem, Blurred Constitutive Laws and Bipotential Convex Covers, An hp‐adaptive finite element model for heat transfer within partitioned enclosures, AN ERROR ESTIMATOR AND ADAPTIVITY BASED ON BASIS COEFFICIENT-VECTOR FIELD OF ELEMENT-FREE GALERKIN METHOD, Efficient simulation of free surface flows with discrete least-squares meshless method usinga priorierror estimator, Finite element and finite volume simulation and error assessment of polymer melt flow in closed channels, A continuum mechanics-based framework for boundary and finite element mesh optimization in two dimensions for application in excavation analysis, A finite element approach to incompressible two-phase flow on manifolds, Interplay between discretization and algebraic computation in adaptive numerical solutionof elliptic PDE problems, The effectivity of the Zienkiewicz-Zhu error estimate and two 2D adaptive mesh generators, Mesh enrichment against mesh regeneration using quadrilateral elements, A simple local error estimator and an adaptive time-stepping procedure for direct integration method in dynamic analysis, An element error indicator and a related stress-improvement procedure, Adaptive mesh generation and transformation of triangular to quadrilateral meshes, Adaptive non‐nested multigrid methods, h-Adaptive FE methods applied to single- and multiphase problems, Stress recovery and error estimation for the scaled boundary finite-element method, Unnamed Item, A comparison of a posteriori error estimators for mixed finite element discretizations by Raviart-Thomas elements, Explicit error bounds in a conforming finite element method, Each averaging technique yields reliable a posteriori error control in FEM on unstructured grids. Part I: Low order conforming, nonconforming, and mixed FEM, Each averaging technique yields reliable a posteriori error control in FEM on unstructured grids. Part II: Higher order FEM, A posteriori error estimation in non-linear FE analyses of shell structures, Remeshing for metal forming simulations?Part II: Three-dimensional hexahedral mesh generation, Numerical study of the effectivity index for an anisotropic error indicator based on Zienkiewicz-Zhu error estimator, CRITERIA TO ACHIEVE NEARLY OPTIMAL MESHES IN THEh-ADAPTIVE FINITE ELEMENT METHOD, A new point creation scheme for uniform Delaunay triangulation, A Posteriori Finite Element Error Analysis for Symmetric Positive Differential Equations, Linear and non‐linear finite element error estimation based on assumed strain fields, PROBABILISTIC ANALYSIS OF AN A POSTERIORI ERROR ESTIMATOR FOR FINITE ELEMENTS, GRADIENT RECOVERY FOR SINGULARLY PERTURBED BOUNDARY VALUE PROBLEMS II: TWO-DIMENSIONAL CONVECTION–DIFFUSION, Unnamed Item, Unnamed Item, Unnamed Item, Unnamed Item, ALGORITHMIC ASPECTS OF ADAPTIVE MULTIGRID FINITE ELEMENT ANALYSIS, COMBINATION OF ADAPTIVITY AND MESH SMOOTHING FOR THE FINITE ELEMENT ANALYSIS OF SHELLS WITH INTERSECTIONS, A comparison between new adaptive remeshing strategies based on point wise stress error estimation and energy norm error estimation, A simple error estimator for extended finite elements, A Multiscale Failure Modeling Framework for Strain Localization in Quasi-Brittle Materials, Unnamed Item, Unnamed Item, Analysis of à‐posteriori error indicator in viscous flows, Analysis of recovery type a posteriori error estimators for mildly structured grids, All first-order averaging techniques for a posteriori finite element error control on unstructured grids are efficient and reliable, Unnamed Item, Two‐dimensional transient dynamic analysis with adaptive mesh refinement, Mapping of finite elements around corner singularities of the quasi‐harmonic equation, Bunsen flame simulation by finite elements on adaptively refined, unstructured triangulations, Superconvergent patch recovery of finite‐element solution and a posteriori L₂ norm error estimate, A Recovery-Based Error Estimator for the Discontinuous Galerkin Method for Transient Linear Hyperbolic Conservation Laws on Cartesian Grids, A posteriori finite element error estimators for indefinite elliptic boundary value problems^∗, Functional a posteriori error estimates for discontinuous Galerkin approximations of elliptic problems, Control of analyses with isoparametric elements in both 2-D and 3-D, A robust implementation of Zienkiewicz and Zhu's local patch recovery method, Evaluation of some error estimators for the four‐noded lagrangian quadrilateral, Improved element stresses for node and element patches using superconvergent patch recovery, Transient and steady heat conduction using an adaptive finite element cad‐based approach, Theoretical formulations for adaptive finite element computations, Analytical solutions of mass transport problems for error estimation of finite/infinite element methods, Notes on mesh optimal criteria in adaptive finite element computations, On understanding and teaching of the finite element method, Unnamed Item, Unnamed Item, Anisotropic Adapted Meshes for Image Segmentation: Application to Three-Dimensional Medical Data, An Adaptive Finite Element Scheme for Turbulent Free Shear Flows, Reordering and incomplete preconditioning in serial and parallel adaptive mesh refinement and coarsening flow solutions, Bayesian Mesh Adaptation for Estimating Distributed Parameters, Unnamed Item, Analysis of the Residual-Type and the Gradient Recovery-Type a Posteriori Error Estimators for a Consistent Atomistic-to-Continuum Coupling Method in One-Dimension, A simple estimator for stress errors dedicated to large elastic finite element simulations, Gradient Recovery-Type a Posteriori Error Estimates for Steady-State Poisson-Nernst-Planck Equations, AIR Algebraic Multigrid for a Space-Time Hybridizable Discontinuous Galerkin Discretization of Advection(-Diffusion), Unnamed Item, Unnamed Item, Adaptive mesh generation for fluid mechanics problems, A dimension-reduction model for brittle fractures on thin shells with mesh adaptivity, A posteriori error estimates of edge residual type of finite element method for nonmonotone quasi‐linear elliptic problems, Unnamed Item, Unnamed Item, Adaptive tetrahedral mesh generation by constrained centroidal voronoi‐delaunay tessellations for finite element methods, A piecewise linear Galerkin approach to stress analysis of nearly incompressible materials, Local estimation of the error in the von Mises' stress and L2‐norm of the stress for linear elasticity problems, A posteriori error estimation for variational problems with uniformly convex functionals, A gradient-based adaptation procedure and its implementation in the element-free Galerkin method, The use of dynamic grid adaptation algorithms for the modelling of flow around a circular cylinder in sub-critical flow regime, Generalized conservation checks in finite element analysis, Pointwise a Posteriori Error Estimates for Elliptic Problems on Highly Graded Meshes, Error estimation for plate structures, Adaptive Finite Element Method of Lines with Local Mesh Refinement in Maximum Norm Based on Element Energy Projection Method, Error calculation in the constitutive relation for Mindlin plate finite element analyses, A simple local a posteriori bending indicator for axisymmetric membrane and bending shell elements, Superconvergent Patch Recovery for plate problems using statically admissible stress resultant fields, On a robust and scalable linear elasticity solver based on a saddle point formulation, A superconvergent stress recovery technique for accurate boundary stress extraction, Multilevel solution of the time-harmonic Maxwell's equations based on edge elements, Zienkiewicz–Zhu error estimators on anisotropic tetrahedral and triangular finite element meshes, Solution adaptive grids applied to low Reynolds number flow, The numerical modelling of ceramics subject to impact using adaptive discrete element techniques, Superconvergent gradient recovery for virtual element methods, Application of Adaptive Phase-Field Scaled Boundary Finite Element Method for Functionally Graded Materials, A Fully Automatic h-Adaptive Analysis Procedure Using the Edge-Based Smoothed Point Interpolation Method, Unnamed Item, Unnamed Item, Aspects of Adaptive Remeshing Techniques in Finite Elasticity, An asymptotic formula for correcting finite element predicted natural frequencies of membrane vibration problems, Three‐dimensional finite element analysis for hollow section extrusion of a triply‐connected section using mismatching refinement with domain decomposition, Comparison of different error estimators for contact problems, OPTIMAL DESIGN FOR NON-STEADY-STATE METAL FORMING PROCESSES—I. SHAPE OPTIMIZATION METHOD, ERROR ESTIMATION AND ADAPTIVITY IN ELASTOPLASTICITY, History of the Finite Element Method – Mathematics Meets Mechanics – Part II: Mathematical Foundation of Primal FEM for Elastic Deformations, Error Analysis and Adaptivity, Unnamed Item, h‐adaptive finite element solution of high Rayleigh number thermally driven cavity problem, A metal‐forming approach to automatic generation of graded initial quadrilateral finite element meshes, A new element bisection algorithm for unstructured adaptive tetrahedral mesh generation, An estimation of point-wise approximation error using the set of numerical solutions, Adaptive VEM: Stabilization-Free A Posteriori Error Analysis and Contraction Property, Unnamed Item, FEMs -- a mechanics-oriented finite element modeling software, An adaptive space-time algorithm for the incompressible Navier-Stokes equations, Space-time adaptivity for a multi-scale cancer invasion model, A custom arc‐length Finite Element solver for large deformation adhesive contacts using a k‐d tree accelerated volumetric interaction scheme, Hybrid analysis and modeling, eclecticism, and multifidelity computing toward digital twin revolution, An Introductory Review on A Posteriori Error Estimation in Finite Element Computations, Recovery strategies, a posteriori error estimation, and local error indication for second‐order G/XFEM and FEM, Design of innovative self-expandable femoral stents using inverse homogenization topology optimization, An \(hp\)-adaptive discontinuous Galerkin method for phase field fracture, \textit{A posteriori} error estimates for hierarchical mixed-dimensional elliptic equations, A posteriori error estimations and convergence criteria in fast Fourier transform‐based computational homogenization, A probabilistic data assimilation framework to reconstruct finite element error fields from sparse error estimates: Application to sub‐modeling, A mixed finite element formulation for elastoplasticity, A posteriori identities for measures of deviation from exact solutions of nonlinear boundary value problems, Two-level error estimation for the integral fractional Laplacian, On adaptive mesh coarsening procedures for the virtual element method for two-dimensional elastic problems, Design and adaptive finite element simulation of conformal transformation optics devices with isotropic materials, A review of VMS a posteriori error estimation with emphasis in fluid mechanics, A novel application of recovered stresses in stress intensity factors extraction methods for the generalized/extended finite element method, On the derivation of a component-free scheme for Lagrangian fluid-structure interaction problems, Posteriori error neural network: a recovery type posteriori error estimator based on neural network for diffusion problems, Improvement of Linear Tetrahedral Element Performance by Using Substructuring Method, Mesh refinement for anisotropic diffusion in magnetized plasmas, From image data towards microstructure information – Accuracy analysis at the digital core of materials, Error assessment of an adaptive finite elements -- neural networks method for an elliptic parametric PDE, Application of h‐adaptive FEM and Zarka's approach to analysis of shakedown problems, Ana posteriorierror estimator for thep- andhp-versions of the finite element method, Averaging technique for FE -- a posteriori error control in elasticity. I: Conforming FEM, Analysis of a least squares finite element method for the circular arch problem., Least-squares finite element approximations to the Timoshenko beam problem., Refficientlib: An Efficient Load-Rebalanced Adaptive Mesh Refinement Algorithm for High-Performance Computational Physics Meshes, A residual a posteriori error estimator for the finite element solution of the Helmholtz equation, A computational methodology for shape optimization of structures in frictionless contact, Averaging technique for FE -- a posteriori error control in elasticity. II: \(\lambda\)-independent estimates, Enhanced error estimator for adaptive finite element analysis of 3D incompressible flow, Error estimation and adaptive mesh refinement in boundary element method, an overview, Gradient weighted residuals for error indicators in FEM and BEM, Adaptive mesh enrichment for the Poisson-Boltzmann equation, Adaptive finite element analysis with quadrilateral elements using a new \(h\)-refinement strategy., Multiscale algorithm with patches of finite elements