A constitutive model for shape memory alloys accounting for thermomechanical coupling
From MaRDI portal
Publication:414358
DOI10.1016/J.IJPLAS.2010.09.005zbMATH Open1426.74082OpenAlexW2004411421WikidataQ61778740 ScholiaQ61778740MaRDI QIDQ414358FDOQ414358
Authors: Claire Morin, Ziad Moumni, Wael Zaki 
Publication date: 11 May 2012
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.09.005
Recommendations
- Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling
- A thermomechanically coupled finite deformation constitutive model for shape memory alloys based on hencky strain
- Thermomechanically coupled modelling of shape memory alloys in the framework of large strains
- On phase transformation models for thermo-mechanically coupled response of nitinol
- Analysis of the rate-dependent coupled thermo-mechanical response of shape memory alloy bars and wires in tension
Thermal effects in solid mechanics (74F05) Crystals in solids (74N05) Problems involving hysteresis in solids (74N30) Finite element methods applied to problems in solid mechanics (74S05) Large-strain, rate-dependent theories of plasticity (74C20)
Cites Work
- Finite deformation pseudo-elasticity of shape memory alloys -- constitutive modelling and finite element implementation
- A thermodynamic finite-strain model for pseudoelastic shape memory alloys
- A 3-D phenomenological constitutive model for shape memory alloys under multiaxial loadings
- A 3D model of the cyclic thermomechanical behavior of shape memory alloys
- A three-dimensional model of the thermomechanical behavior of shape memory alloys
- A 3-D constitutive model for shape memory alloys incorporating pseudoelasticity and detwinning of self-accommodated martensite
- Thermo-mechanical modelling of a superelastic shape-memory wire under cyclic stretching-bending loadings
- A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings.
- Theoretical and numerical modeling of solid-solid phase change: application to the description of the thermomechanical behavior of shape memory alloys
- Multi-axial behavior of shape-memory alloys undergoing martensitic reorientation and detwinning
- Plastic and visco-plastic materials with generalized potential
- Strain rate sensitivity in superelasticity
- A microstructure-based constitutive model for the pseudoelastic behavior of NiTi SMAs
- Constitutive model for uniaxial transformation ratchetting of super-elastic NiTi shape memory alloy at room temperature
- Micromechanical modelling of the effect of plastic deformation on the mechanical behaviour in pseudoelastic shape memory alloys
- On the viscous and strain rate-dependent behavior of polycrystalline NiTi
Cited In (24)
- An experimentally-fitted thermodynamical constitutive model for polycrystalline shape memory alloys
- A multiscale magneto-thermo-mechanically coupled model for ultra-low-field induced magneto-elastocaloric effect in magnetostrictive-shape memory alloy composite system
- Constitutive modeling of shape memory alloy wire with non-local rate kinetics
- A constitutive level-set model for shape memory alloys
- Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling
- Explicit finite element implementation of an improved three dimensional constitutive model for shape memory alloys
- Coupling in shape memory alloys
- A thermo-mechanically coupled field model for shape memory alloys
- A RATE-INDEPENDENT MODEL FOR THE ISOTHERMAL QUASI-STATIC EVOLUTION OF SHAPE-MEMORY MATERIALS
- A thermodynamical constitutive model for shape memory materials. II: The SMA composite material
- Tailoring the anisotropic (positive/zero/negative) thermal expansion in shape memory alloys through phase transformation and martensite (re)orientation
- Modelling nonlinear dynamics of shape-memory-alloys with approximate models of coupled thermoelasticity
- A thermomechanically coupled finite deformation constitutive model for shape memory alloys based on hencky strain
- Temperature variation of a NiTi wire considering the effects of test machine grips
- A thermomechanical finite strain shape memory alloy model and its application to bistable actuators
- On a rate-type thermomechanical model for shape memory bars. Stress-controlled problems
- Gradient structures for the thermomechanics of shape-memory materials
- Modeling the martensite reorientation and resulting zero/negative thermal expansion of shape memory alloys
- Analysis of the thermoelastic model of a plate with non-linear shape memory alloy reinforcements
- Analysis of the rate-dependent coupled thermo-mechanical response of shape memory alloy bars and wires in tension
- On non-monotonic rate dependence of stress hysteresis of superelastic shape memory alloy bars
- On phase transformation models for thermo-mechanically coupled response of nitinol
- A two-scale thermo-mechanically coupled constitutive model for grain size- and rate-dependent deformation of nano-crystalline NiTi shape memory alloy
- A multi-dimensional constitutive model for shape memory alloys
This page was built for publication: A constitutive model for shape memory alloys accounting for thermomechanical coupling
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q414358)
