Modelling the pressure die casting process using a hybrid Finite-Boundary Element model

DOI10.1002/(SICI)1097-0207(19990730)45:9%3C1165::AID-NME624%3E3.0.CO;2-9MaRDI QIDQ4267044zbMATH OpenOpenAlexFDO

Authors

Publication date 24 June 2001

Full work available at URL https://doi.org/10.1002/(sici)1097-0207(19990730)45:9%3C1165::aid-nme624%3E3.0.co;2-9

zbMATH Keywords

finite element methodsolidificationboundary element methodboilingmultiplicative Schwarz methodlinear heat conductionpressure die castingcapacitance methodthree-dimensional hybrid thermal model

Mathematics Subject Classification ID

Finite element methods applied to problems in fluid mechanics (76M10) Stefan problems, phase changes, etc. (80A22) Multiphase and multicomponent flows (76T99) Boundary element methods applied to problems in fluid mechanics (76M15)

Recommendations

• Modelling the pressure die casting process with the boundary element method: Steady state approximation
• Modelling the transient thermal behavior of the pressure die-casting process with the BEM
• Transient thermal model for the hot chamber injection system in the pressure die casting process
• Thermo-mechanical finite element model of casting systems
• Finite element simulation of metal casting

Cites work

• scientific article; zbMATH DE number 637050 (Why is no real title available?)
• scientific article; zbMATH DE number 1036620 (Why is no real title available?)
• A new method for coupling of boundary element method and finite element method
• A preconditioning strategy for the solution of linear boundary element systems using the GMRES method
• AN ITERATIVE SOLUTION SCHEME FOR SYSTEMS OF WEAKLY CONNECTED BOUNDARY ELEMENT EQUATIONS
• An analysis of solidification problems by the boundary element method
• Boundary integral equation solution of moving boundary phase change problems
• Modelling the pressure die casting process with the boundary element method: Steady state approximation
• Modelling the transient thermal behavior of the pressure die-casting process with the BEM
• SOURCE-WEIGHTED DOMAIN INTEGRAL APPROXIMATION FOR LINEAR TRANSIENT HEAT CONDUCTION
• The coupling of the finite element method and boundary solution procedures

Cited in

(10)

• Modelling the pressure die casting process with the boundary element method: Steady state approximation
• A rapid BEM-based method for cooling simulation of injection molding
• Thermal analysis of piston casting using 3-D finite element method.
• scientific article; zbMATH DE number 1908034 (Why is no real title available?)
• Novel cooling channel shapes in pressure die casting
• An acceleration method for the BEM-based cooling simulation of injection molding
• Three-dimensional nonlinear coupled thermo-mechanical FEM analysis of the dimensional accuracy for casting dies in rapid tooling.
• Modelling the transient thermal behavior of the pressure die-casting process with the BEM
• Two-phase flow modeling of air entrapment in high pressure die casting considering air compressibility and surface tension
• A 1-D analytical model for the thermally induced stresses in the mold surface during die casting

This page was built for publication: Modelling the pressure die casting process using a hybrid Finite-Boundary Element model

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4267044)