Subsonic Potential Aerodynamics for Complex Configurations : A General Theory
From MaRDI portal
Publication:4401664
DOI10.2514/3.49191zbMATH Open0276.76027OpenAlexW1507996268MaRDI QIDQ4401664FDOQ4401664
Authors: Luigi Morino, Ching-Chiang Kuo
Publication date: 1974
Published in: AIAA Journal (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.2514/3.49191
Cited In (30)
- Numerical simulation of flapping wings using a panel method and a high-order Navier-Stokes solver
- Three-dimensional unsteady transonic flow. An integral equation formulation
- Inviscid flow passing a lifting body with a higher order boundary element method
- A verification study on low-order three-dimensional potential-based panel codes
- Boundary integral equation for wave equation with moving boundary and applications to compressible potential aerodynamics of airplanes and helicopters
- Aeroelastic interactions between plates and three-dimensional inviscid potential flows
- Modeling of cavitating or ventilated flows using BEM
- Boundary element analysis of liquid sloshing in baffled tanks
- A hybrid genetic based optimization procedure for aircraft conceptual analysis
- A boundary-integral equation method for free surface viscous flows
- Noise radiation from moving surfaces.
- Global error analysis of two-dimensional panel methods for Dirichlet formulation
- Hydrodynamic analysis of flapping-foil thrusters operating beneath the free surface and in waves
- Panel method for mixed configurations with finite thickness and zero thickness
- Boundary element method for the prediction of performance of flapping foils with leading-edge separation
- The local error of a low-order boundary element method at the trailing edge of a hydrofoil and its effect on the global solution
- Numerical calculation of singular integrals appearing in three- dimensional potential flow problems
- A three-dimensional, \(p\)-version BEM: high-order refinement leveraged through regularization
- A boundary integral equation method for axisymmetric viscous flows
- An isogeometric boundary element method for 3D lifting flows using T-splines
- Global error analysis of two-dimensional panel methods for Neumann formulation
- Simulation of unsteady motion of a propeller in a fluid including free wake modeling
- A theorem on the potential of a double layer
- Unsteady aerodynamics and vortex-sheet formation of a two-dimensional airfoil
- A boundary node method for airfoils based on the Dirichlet condition
- A note on a Galerkin technique for integral equations in potential flows
- Helmholtz decomposition revisited: Vorticity generation and trailing edge condition. I. Incompressible flows
- Hybrid numerical technique for evaluating wing aerodynamic loading with propeller interference
- Reduced basis isogeometric methods (RB-IGA) for the real-time simulation of potential flows about parametrized NACA airfoils
- Saturation of almost periodic and chaotic aeroelastic oscillations of plates under a resonant multimode force
This page was built for publication: Subsonic Potential Aerodynamics for Complex Configurations : A General Theory
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4401664)