scientific article; zbMATH DE number 807484
From MaRDI portal
Publication:4850873
Recommendations
- scientific article; zbMATH DE number 1086874
- Investigation of a gradient enriched Gurson-Tvergaard model for porous strain hardening materials
- Approximate models for ductile metals containing non-spherical voids -- case of axisymmetric prolate ellipsoidal cavities
- Homogenized Gurson-type behavior equations for strain rate sensitive materials
- Limit analysis and Gurson's model
Cited in
(29)- On the predictive capabilities of the shear modified Gurson and the modified Mohr-Coulomb fracture models over a wide range of stress triaxialities and Lode angles
- The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension
- A micromechanical model of distributed damage due to void growth in general materials and under general deformation histories
- Modification of the Gurson model for shear failure
- Investigation of a gradient enriched Gurson-Tvergaard model for porous strain hardening materials
- A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling
- Plastic potentials for anisotropic porous solids
- The Gurson-Tvergaard-Needleman model for rate and temperature-dependent materials with isotropic and kinematic hardening
- Damage initiation and growth in metals. Comparison between modelling and tomography experiments
- Plastic deformation modes in perforated sheets and their relation to yield and limit surfaces
- Void growth and coalescence in ductile solids with stage III and stage IV strain hardening
- Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model
- A strain-gradient formulation for fiber reinforced polymers: hybrid phase-field model for porous-ductile fracture
- scientific article; zbMATH DE number 2114852 (Why is no real title available?)
- On the exploitation of Armstrong-Frederik type nonlinear kinematic hardening in the numerical integration and finite-element implementation of pressure dependent plasticity models
- An efficient 3D implicit approach for the thermomechanical simulation of elastic-viscoplastic materials submitted to high strain rate and damage
- Numerical modelling of crack propagation in ductile materials combining the GTN model and X-FEM
- Void coalescence in porous ductile solids containing two populations of cavities
- A Gurson-type layer model for ductile porous solids containing ellipsoidal voids with isotropic and kinematic hardening
- Phase-field modeling of porous-ductile fracture in non-linear thermo-elasto-plastic solids
- Elastic-plastic strain hardening response of porous metals
- A constitutive model for elastoplastic solids containing primary and secondary voids
- Plasticity and fracture of martensitic boron steel under plane stress conditions
- A micromechanical explanation of the mean stress effect in high cycle fatigue
- Homogenized Gurson-type behavior equations for strain rate sensitive materials
- Numerical study and theoretical modelling of void growth in porous ductile materials subjected to cyclic loadings
- Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals
- An extended model for void growth and coalescence
- Porous-ductile fracture in thermo-elasto-plastic solids with contact applications
This page was built for publication:
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4850873)
