Чистый изгиб балки в условиях ползучести из разносопротивляющегося материала

DOI10.14498/VSGTU1042zbMATH Open1449.74126OpenAlexW2317787992MaRDI QIDQ4960032FDOQ4960032

Authors: A. M. Lokoshchenko, Kamilla Abdul Guseĭn Agakhi, L. V. Fomin 

Publication date: 8 April 2020

Published in: Vestnik Samarskogo Gosudarstvennogo Tekhnicheskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki (Search for Journal in Brave)

Full work available at URL: http://mathnet.ru/eng/vsgtu1042

Recommendations

• The creep of thin beams under small bending moments
• On the analysis of pure bending of rigid-plastic beams in strain-gradient plasticity
• Finite‐element model for creep buckling analysis of beam‐type structures
• scientific article; zbMATH DE number 4078947
• Pure bending of an elastic prismatic beam made of a material with density-dependent material parameters
• Bending and buckling of thin strain gradient elastic beams
• Maximum steady stress of various cross-section beams under combined loadings during creep
• Delamination of multilayered inhomogeneous beams under nonlinear creep
• Creep failure of a simply supported beam through a uniaxial continuum damage mechanics model
• Generalized forces in the description of creep processes in beam elements

zbMATH Keywords

beamsfractional modelbendingsquare cross-sectioncircular cross-sectionsteady-state creepmultimodulus behavior of material

Mathematics Subject Classification ID

Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Plastic materials, materials of stress-rate and internal-variable type (74C99) Applications of fractional calculus in solid mechanics (74S40)

Cites Work

• Title not available (Why is that?)
• Title not available (Why is that?)

Cited In (11)

• Inverse problem of pure beam bending in creep conditions
• Pure bending of an elastic prismatic beam made of a material with density-dependent material parameters
• Generalized stochastic model of creep and creep rupture beams in pure bending and its application to the estimation of reliability
• Title not available (Why is that?)
• Maximum steady stress of various cross-section beams under combined loadings during creep
• Iterative procedures of equilibrium parameters estimation and process stability of pure bending of beams from soft and brittle weakening materials
• The creep of thin beams under small bending moments
• Title not available (Why is that?)
• Generalized forces in the description of creep processes in beam elements
• Analysis of the influence of aggressive environment on creep and creep rupture of rod under pure bending
• The refined model of flexural deformation of longitudinally reinforced metal-composite wall-beams under conditions of steady-state creep

This page was built for publication: Чистый изгиб балки в условиях ползучести из разносопротивляющегося материала

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4960032)