Comparison between super-hydrophobic, liquid infused and rough surfaces: a direct numerical simulation study
From MaRDI portal
Publication:5379052
Abstract: Direct Numerical Simulations of two superposed fluids in a channel with a textured surface on the lower wall have been carried out. A parametric study varying the viscosity ratio between the two fluids has been performed to mimic both {�f idealised} super hydrophobic and liquid infused surfaces and assess its effect on the frictional, form and total drag for three different textured geometries: longitudinal square bars, transversal square bars and staggered cubes. The interface between the two fluids is assumed to be slippery in the streamwise and spanwise directions and not deformable in the vertical direction, corresponding to the ideal case of infinite surface tension. To identify the role of the fluid-fluid interface, an extra set of simulations with a single fluid has been carried out and compared to the results obtained with two fluids of same viscosity separated by the interface. The drag and the maximum wall-normal velocity fluctuations were found to be highly correlated for all the surface configurations, whether they reduce or increase the drag. This implies that the structure of the near-wall turbulence is dominated by the total shear and not by the local boundary condition of super-hydrophobic, liquid--infused or rough surfaces.
Recommendations
- Computer simulations of phase field drops on super-hydrophobic surfaces
- Direct numerical simulations of turbulent flows over superhydrophobic surfaces
- Wall-bounded flow over a realistically rough superhydrophobic surface
- Hydrodynamic friction of fakir-like superhydrophobic surfaces
- On the influence of the modelling of superhydrophobic surfaces on laminar-turbulent transition
- SPH simulation of supercooled large droplets impacting hydrophobic and superhydrophobic surfaces
- An analysis of superhydrophobic turbulent drag reduction mechanisms using direct numerical simulation
Cites work
- scientific article; zbMATH DE number 1531899 (Why is no real title available?)
- An analysis of superhydrophobic turbulent drag reduction mechanisms using direct numerical simulation
- Channel flow over large cube roughness: a direct numerical simulation study
- Characterization of superhydrophobic surfaces for drag reduction in turbulent flow
- Comparison between experiments and direct numerical simulations in a channel flow with roughness on one wall
- Direct numerical simulation of turbulent flow over riblets
- Direct numerical simulations of turbulent channel flow with transverse square bars on one wall
- Drag reduction in turbulent flows over superhydrophobic surfaces
- Effective slip in pressure-driven Stokes flow
- Effects of hydrophobic surface on skin-friction drag
- Heat transfer in a turbulent channel flow with square bars or circular rods on one wall
- High-resolution velocity measurement in the inner part of turbulent boundary layers over super-hydrophobic surfaces
- Integral properties of flows satisfying mixed no-sli p and no-shear conditions
- On drag reduction scaling and sustainability bounds of superhydrophobic surfaces in high Reynolds number turbulent flows
- Pressure fluctuations and interfacial robustness in turbulent flows over superhydrophobic surfaces
- Reynolds and dispersive shear stress contributions above highly skewed roughness
- Secondary flow induced by riblets
- Turbulent flows over superhydrophobic surfaces: flow-induced capillary waves, and robustness of air-water interfaces
Cited in
(16)- Heat transfer in a turbulent channel flow with super-hydrophobic or liquid-infused walls
- Flow-driven collapse of lubricant-infused surfaces
- Heat transfer increase by convection in liquid-infused surfaces for laminar and turbulent flows
- Wall-bounded flow over a realistically rough superhydrophobic surface
- Numerical validation of analytical formulas for channel flows over liquid-infused surfaces
- Flow over natural or engineered surfaces: an adjoint homogenization perspective
- On the influence of the modelling of superhydrophobic surfaces on laminar-turbulent transition
- A hydrophobicity study on wavy and orthogonal textured surfaces
- Predictions of the effective slip length and drag reduction with a lubricated micro-groove surface in a turbulent channel flow
- Laminar-turbulent transition in channel flow with superhydrophobic surfaces modelled as a partial slip wall
- Poiseuille flow of a Bingham fluid in a channel with a superhydrophobic groovy wall
- Roughness on liquid-infused surfaces induced by capillary waves
- Effective boundary conditions at a rough wall: a high-order homogenization approach
- Turbulent drag reduction over liquid-infused textured surfaces: effect of the interface dynamics
- Turbulent kinetic energy production and flow structures in flows past smooth and rough walls
- Dispersive stresses in turbulent flow over riblets
This page was built for publication: Comparison between super-hydrophobic, liquid infused and rough surfaces: a direct numerical simulation study
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q5379052)
