Elastic-Plastic Deformation at Finite Strains

DOI10.1115/1.3564580zbMath0179.55603OpenAlexW2072660839WikidataQ60017121 ScholiaQ60017121MaRDI QIDQ5570758

No author found.

Publication date: 1969

Published in: Journal of Applied Mechanics (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1115/1.3564580

zbMATH Keywords

mechanics of particles and systems

Related Items

Development and deceleration of viscoplastic flow in a layer heated by friction on a rough plane, On the biomechanics and mechanobiology of growing skin, Inelastic heat fraction estimation from two successive mechanical and thermal analyses and full-field measurements, The exponentiated Hencky-logarithmic strain energy. III: Coupling with idealized multiplicative isotropic finite strain plasticity, An approach to elastoplasticity at large deformations, On the theories and numerics of continuum models for adaptation processes in biological tissues, A linear complementarity formulation of rate-independent finite-strain elastoplasticity. Part I: Algorithm for numerical integration, Effect of 3D grain structure representation in polycrystal simulations, A variational constitutive framework for the nonlinear viscoelastic response of a dielectric elastomer, Remarks on rate constitutive equations for finite deformation problems: Computational implications, A phenomenological constitutive model for the nonlinear viscoelastic responses of biodegradable polymers, A note on finite strain theory of elasto-plasticity, Modeling viscoelastic dielectrics, A variational multiscale constitutive model for nanocrystalline materials, Perspectives on biological growth and remodeling, A micromechanically motivated diffusion-based transient network model and its incorporation into finite rubber viscoelasticity, Growing skin: a computational model for skin expansion in reconstructive surgery, Approximation of random microstructures by periodic statistically similar representative volume elements based on lineal-path functions, Finite strain viscoelasticity: how to consistently couple discretizations in time and space on quadrature-point level for full order \(p\geq 2\) and a considerable speed-up, The influence of the initial microdamage anisotropy on macrodamage mode during extremely fast thermomechanical processes, Kinematics and kinetics description of thermoelastic finite deformation from multiplicative decomposition of deformation gradient viewpoint, The transient retardation of a rectilinear viscoplastic flow when the loading stresses are abruptly removed, Bending of single crystal microcantilever beams of cube orientation: finite element model and experiments, A generic approach towards finite growth with examples of athlete's heart, cardiac dilation, and cardiac wall thickening, Optimisation of a pretreatment method to reach the basic elasticity of filled rubber materials, Analytical study on the stress-induced phase or variant transformation in slender shape memory alloy samples, An extended crystal plasticity model for latent hardening in polycrystals, Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling, On the coupling of plastic slip and deformation-induced twinning in magnesium: A variationally consistent approach based on energy minimization, Rate dependent finite strain constitutive model of polyurea, A `stack' model of rate-independent polycrystals, A geometric theory of growth mechanics, A new semi-implicit formulation for multiple-surface flow rules in multiplicative plasticity, A binary-tree based model for rate-independent polycrystals, Nonlinear elasto-plastic model for dense granular flow, Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: application to a high density polyethylene, Characterization of yielding behavior of polycrystalline metals with single crystal plasticity based on representative characteristic length, The effect of microstructural representation on simulations of microplastic ratcheting, Implicit stress-update algorithm for isotropic Cam-clay model based on the subloading surface concept at finite strains, Anisotropic finite elastoplasticity with nonlinear kinematic and isotropic hardening and application to sheet metal forming, On kinematic, thermodynamic, and kinetic coupling of a damage theory for polycrystalline material, A dislocation density-based single crystal constitutive equation, A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition, A finite-deformation-based phenomenological theory for shape-memory alloys, Coupling between martensitic phase transformations and plasticity: a microstructure-based finite element model, Simulation of polycrystal deformation with grain and grain boundary effects, A chemo-thermo-mechanically coupled theory for elastic-viscoplastic deformation, diffusion, and volumetric swelling due to a chemical reaction, Constitutive modeling of temperature and strain rate dependent elastoplastic hardening materials using a corotational rate associated with the plastic deformation, Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation, Mechanical modeling of growth considering domain variation. II: Volumetric and surface growth involving Eshelby tensors, A variational void coalescence model for ductile metals, Thermally actuated shape-memory polymers: experiments, theory, and numerical simulations, The concept of physical metric in rate-independent generalized plasticity, A coupled theory of fluid permeation and large deformations for elastomeric materials, Non-associated reuleaux plasticity: analytical stress integration and consistent tangent for finite deformation mechanics, Material growth in thermoelastic continua: theory, algorithmics, and simulation, On the implementation of rate-independent standard dissipative solids at finite strain-variational constitutive updates, Geometric integrators for multiplicative viscoplasticity: analysis of error accumulation, A discontinuous Galerkin formulation of a model of gradient plasticity at finite strains, Discrete micromechanics of elastoplastic crystals in the finite deformation range, Elastic-plastic multiplicative decomposition with a stressed intermediate configuration, A finite isoclinic elasto-plasticity model with orthotropic yield function and notion of plastic spin, Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry, The geometry of nonlinear elasticity, Implicit dynamic three-dimensional finite element analysis of an inelastic biphasic mixture at finite strain. I: application to a simple geomaterial, Variationally consistent modeling of finite strain plasticity theory with nonlinear kinematic hardening, A Green-Naghdi approach to finite anisotropic rate-independent and rate-dependent thermo-plasticity in logarithmic Lagrangian strain-entropy space, The Souza-Auricchio model for shape-memory alloys, Hyperelastic internal balance by multiplicative decomposition of the deformation gradient, Construction of two- and three-dimensional statistically similar RVEs for coupled micro-macro simulations, An adjoint-based method for a linear mechanically-coupled tumor model: application to estimate the spatial variation of murine glioma growth based on diffusion weighted magnetic resonance imaging, Anisotropic finite strain viscoelasticity based on the Sidoroff multiplicative decomposition and logarithmic strains, Multiphasic intervertebral disc mechanics: theory and application, A multiplicative approach for nonlinear electro-elasticity, Relaxation in crystal plasticity with three active slip systems, Thermomechanical characterisation of cellular rubber, A numerical study of hypoelastic and hyperelastic large strain viscoplastic Perzyna type models, Advantages of formulating an evolution equation directly for elastic distortional deformation in finite deformation plasticity, Constitutive equations for elastoplastic bodies at finite strain: Thermodynamic implementation, On multiple spins and texture development. Case study: Kinematic and orthotropic hardening, A finite strain fibre-reinforced viscoelasto-viscoplastic model of plant cell wall growth, Numerical modeling of large strain behavior of polymeric crushable foams, Concerning the fictitious continuum in damage mechanics, Equivalence principles in continuum damage mechanics, A finite-strain elastic-plastic Cosserat theory for polycrystals with grain rotations, Various numerical methods for solving unilateral contact problems with friction, Towards variational constitutive updates for non-associative plasticity models at finite strain: models based on a volumetric-deviatoric split, Computational modeling of deformation bands in granular media. I: Geological and mathematical framework, A strain space gradient plasticity theory for finite strain, Multi-scale constitutive model and computational framework for the design of ultra-high strength, high toughness steels, Finite strain logarithmic hyperelasto-plasticity with softening: a strongly non-local implicit gradient framework, Deformation, fracture, and fragmentation in brittle geologic solids, On the kinematics of finite-deformation plasticity, On the kinematics of finite strain plasticity, A crystal plasticity model that incorporates stresses and strains due to slip gradients, A finite deformation theory of higher-order gradient crystal plasticity, A theory for stress-driven interfacial damage upon cationic-selective oxidation of alloys, Global existence for rate-independent gradient plasticity at finite strain, Existence and time-discretization for the finite-strain Souza-Auricchio constitutive model for shape-memory alloys, Variational gradient plasticity at finite strains. I: Mixed potentials for the evolution and update problems of gradient-extended dissipative solids, Concurrent two-scale model for the viscoelastic behavior of elastomers filled with hard nanoparticles, Finite plasticity in \(P^\top P\). I: Constitutive model, Existence and linearization for the Souza-Auricchio model at finite strains, Computational aspects of large elastoplastic deformations in the presence of anisotropy and plastic spin, An elastoplastic framework for granular materials becoming cohesive through mechanical densification. II: The formulation of elastoplastic coupling at large strain, Efficient variational constitutive updates by means of a novel parameterization of the flow rule, On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. I: Theoretical formulation, An Eulerian projection method for quasi-static elastoplasticity, A thermomechanical anisotropic model for shock loading of elastic-plastic and elastic-viscoplastic materials with application to jointed rock, Constitutive equations for thermomechanical deformations of glassy polymers, A consistent time FE method for large strain elasto-plasto-dynamics, Finite element formulation for modeling nonlinear viscoelastic elastomers, On plastic incompressibility within time-adaptive finite elements combined with projection techniques, Viscoplasticity of metals: comments on statistical approaches to dislocation reactions, Il'yushin's conditions in non-isothermal plasticity, Energy-dissipative momentum-conserving time-stepping algorithms for finite strain multiplicative plasticity, Critical state plasticity. VI: Meso-scale finite element simulation of strain localization in discrete granular materials, An inelastic constitutive model of blood vessels, Finite strain plasticity, the stress condition and a complete shell model, Homogenization of layered materials with rigid components in single-slip finite crystal plasticity, Fully anisotropic hyperelasto-plasticity with exponential approximation by power series and scaling/squaring, Grain size dependence of polycrystalline plasticity modeling in cylindrical indentation, A single crystal plasticity finite element formulation with embedded deformation twins, Surface tension controls the onset of gyrification in brain organoids, A diffuse-interface compact difference method for compressible multimaterial elastic-plastic flows, Implementation of incremental variational formulations based on the numerical calculation of derivatives using hyper dual numbers, Finite element analysis of geometrically necessary dislocations in crystal plasticity, Dielectric elastomers - numerical modeling of nonlinear visco-electroelasticity, A hybrid variationally consistent homogenization approach based on Ritz's method, Finite strain fracture of plates and shells with configurational forces and edge rotations, Subdivision shell elements with anisotropic growth, The special-linear update: An application of differential manifold theory to the update of isochoric plasticity flow rules, Accelerating crystal plasticity simulations using GPU multiprocessors, The effect of different forms of strain energy functions in hyperelasticity-based crystal plasticity models on texture evolution and mechanical response of face-centered cubic crystals, A symplectic Brezis-Ekeland-Nayroles principle for dynamic plasticity in finite strains, Numerical analysis of periodic laminar and fibrous media undergoing a jamming transition, A homogenized bending theory for prestrained plates, Discrete structures in continuum descriptions of defective crystals, Genesis and progress of virtual power principle, Virtual elements for computational anisotropic crystal plasticity, Creep and stress relaxation in the material of a cylindrical layer in its linear motion, Modelling of the elasto-viscoplastic damage behaviour of glassy polymers, Frame indifferent elastoplasticity of frictional materials at finite strain, Constitutive modeling of ice in the high strain rate regime, On the thermomechanical coupling in finite strain plasticity theory with non linear kinematic hardening by means of incremental energy minimization, Constitutive modeling of strain rate effects in nanocrystalline and ultrafine grained polycrystals, Finite strain hyperelastoplastic modelling of saturated porous media with compressible constituents, Calculations of large nonisothermal deformations of elastoviscoplastic materials, Micro-slip-induced multiplicative plasticity: existence of energy minimizers, Large deformation plasticity. From basic relations to finite deformation, On volumetric locking of low‐order solid and solid‐shell elements for finite elastoviscoplastic deformations and selective reduced integration, Finite elastoplastic deformation of membrane shells, Finite element modelling of the stamping of anisotropic sheet metals, Constitutive equations for martensitic reorientation and detwinning in shape-memory alloys, A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses, Transformation-induced plasticity in ferrous alloys, Growth and instability in elastic tissues, A variational formulation of the coupled thermo-mechanical boundary value problem for general dissipative solids, Self-consistent modeling of large plastic deformation, texture and morphology evolution in semi-crystalline polymers, Size effects and idealized dislocation microstructure at small scales: predictions of a phenomenological model of mesoscopic field dislocation mechanics. I., The Burgers vector and the flow of screw and edge dislocations in finite-deformation single-crystal plasticity, A constitutive model for the dynamic and high-pressure behaviour of a propellant-like material: Part I: Experimental background and general structure of the model, Thermodynamic format and heat generation of isotropic hardening plasticity, Finite deformation pseudo-elasticity of shape memory alloys -- constitutive modelling and finite element implementation, A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on densities of geometrically necessary dislocations, High-order time integration applied to metal powder plasticity, A constitutive equation for open-cell cellular solids, including viscoplasticity, damage and deformation induced anisotropy, Die shape design optimization of sheet metal stamping process using meshfree method, Finite deformation analysis of geomaterials, Numerical analyses of discontinuous material bifurcation: strong and weak discontinuities, A large time incremental finite element method for finite deformation problem, An objective incremental formulation for the solution of anisotropic elastoplastic problems at finite strain, A variational constitutive model for porous metal plasticity, A finite-deformation constitutive model of bulk metallic glass plasticity, Contribution of computational mechanics in numerical simulation of machining and blancking: state-of-the-art, Thermo-mechanical couplings in elastomers - experiments and modelling, Scaling relation for low energy states in a single-slip model in finite crystal plasticity, On the completeness of root functions of Sturm-Liouville problems for the Lamé system in weighted spaces, A particle finite element method for machining simulations, Effect of residual stress on peak cap stress in arteries, Spherical wave propagation in elastic-plastic work-hardening materials, Some constitutive equations applicable to problems of large dynamic plastic deformation, Some remarks on elastic-plastic deformation at finite strain, Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity, On a finite strain theory of elastic-inelastic materials, On the Fundamentals of the Three-dimensional Translation Gauge Theory of Dislocations, Elastic-plastic expansion of a thick spherical shell with finite elastic strain, RELAXATION OF A MODEL IN FINITE PLASTICITY WITH TWO SLIP SYSTEMS, On the numerical treatment and analysis of finite deformation ductile single crystal plasticity, A computational framework for a class of fully coupled models for elastoplastic damage at finite strains with reference to the linearization aspects, Stabilized finite element formulation for elastic--plastic finite deformations, Microstructure evolution in the equal channel angular extrusion process, Atomic plasticity: description and analysis of a one-billion atom simulation of ductile materials failure, A covariant formulation of anisotropic finite plasticity: theoretical developments, Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains, Dislocation walls in crystals under single slip, A variational multiscale method to incorporate strain gradients in a phenomenological plasticity model, Non-local crystal plasticity model with intrinsic SSD and GND effects, Variational formulations for single-crystal strain-gradient plasticity at large deformations, Crystal plasticity based modeling of time and scale dependent behavior of thin films, A note on the thermal effects upon a Gurson-type material model, Viscometric flow of elastoplastic material heated by wall friction, Moving least-squares in finite strain analysis with tetrahedra support, A two-level elasto-viscoplastic model: application to the analysis of the crystal anisotropy influence, Galerkin-based finite strain analysis with enriched radial basis interpolation, A variational formulation of thermomechanical constitutive update for hyperbolic conservation laws, Algorithm for aging materials with evolving stiffness based on a multiplicative split, Quasistatic hypoplasticity at large strains Eulerian, Unified solid-fluid Lagrangian FEM model derived from hyperelastic considerations, Thermodynamical analysis of hysteresis in rigid ferroelectric bodies ZAMP-D-21-00505R1, A thermomechanical finite strain shape memory alloy model and its application to bistable actuators, Efficient and robust stress integration algorithm for anisotropic distortional hardening law under cross-loading with latent hardening, Simulation of crack propagation through voxel-based, heterogeneous structures based on eigenerosion and finite cells, A micromorphic approach for gradient-enhanced anisotropic ductile damage, The hot optimal transportation meshfree (HOTM) method for materials under extreme dynamic thermomechanical conditions, A thermodynamic analysis of an enhanced theory of heat conduction model: extended influence of finite strain and heat flux, The discontinuous Galerkin material point method for variational hyperelastic-plastic solids, Theory of large deformations of metals, Incompressible inelasticity as an essential ingredient for the validity of the kinematic decomposition \(\mathbf{F} = \mathbf{F}^{\mathrm{e}} \mathbf{F}^{\mathrm{i}}\), Derivation of a homogenized bending-torsion theory for rods with micro-heterogeneous prestrain, On coupled FEM-BEM simulation of the magneto-mechanical behavior of single-crystalline Ni-Mn-Ga alloys, Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds, Error estimation and adaptive meshing in strongly nonlinear dynamic problems, Formulation and finite element implementation of a multiplicative model of coupled poro-plasticity at finite strains under fully saturated conditions, Finite deformation plasticity in principal axes: From a manifold to the Euclidean setting, The variational formulation of viscoplastic constitutive updates, A new computational model for Tresca plasticity at finite strains with an optimal parametrization in the principal space, Multiscale modeling of dislocation patterns and simulation of nanoscale plasticity in body-centered cubic (BCC) single crystals, An interface-capturing Godunov method for the simulation of compressible solid-fluid problems, Integration algorithm for modeling the elasto-viscoplastic response of polycrystalline materials, Nonconvex energy minimization and dislocation structures in ductile single crystals, Cam-Clay plasticity. III: Extension of the infinitesimal model to include finite strains, An adaptive space-time finite element model for oxidation-driven fracture, A theoretical and computational model for isotropic elastoplastic stress analysis in shells at large strains, On modeling fracture of ferritic steels due to hydrogen embrittlement, Eshelby's inclusion problem in large deformations, An anisotropic stress-driven growth model for soft tissue based on Eulerian deformation tensor and growth potential, Finite element simulation of the viscoelastic behavior of elastomers under finite deformation with consideration of nonlinear material viscosity, Mathematical modelling of the production process of irreversible strains under the heating and cooling of a flat heavy layer on an inclined surface, Multiplicative representation of the deformation gradient tensor in geometrically nonlinear multilevel constitutive models, Computational algorithm for investigation large elastoplastic deformations with contact interaction, Theory of uniformity applied to elastic dielectric materials and piezoelectricity, Contorsion of material connection in growing solids, A continuum and computational framework for viscoelastodynamics. I: Finite deformation linear models, Variational updates for thermomechanically coupled gradient-enhanced elastoplasticity -- implementation based on hyper-dual numbers, On the equivalence between the multiplicative hyper-elasto-plasticity and the additive hypo-elasto-plasticity based on the modified kinetic logarithmic stress rate, Geometrically exact elastoplastic rods: determination of yield surface in terms of stress resultants, A finite strain incremental-secant homogenization model for elasto-plastic composites, Computational modeling of epithelial wound healing: short and long term chemo-mechanical mechanisms, Large deformation analysis of elastoplastic homogeneous materials via high order tetrahedral finite elements, Optimal laminates in single-slip elastoplasticity, Gradient crystal plasticity modelling of anelastic effects in particle strengthened metallic thin films, Creep and stress relaxation in the case of loading and unloading of a cylindrical layer with allowance for the development and deceleration of a viscoplastic flow, A dislocation theory of plasticity, A finite elastic-plastic theory and invariance requirements, An additive theory for finite elastic-plastic deformations of the micropolar continuous media, A uniquely defined multiplicative elasto-plasticity model with orthotropic yield function and plastic spin, Efficient two-scale FE-FFT-based mechanical process simulation of elasto-viscoplastic polycrystals at finite strains, A finite-strain model for incomplete damage in elastoplastic materials, Characterizing geometrically necessary dislocations using an elastic-plastic decomposition of Laplace stretch, Simulation of the process of the accumulation of large irreversible deformations under plastic flow and creep conditions, A thermo-mechanical terrestrial model of Arctic coastal erosion, Elastic-plastic deformation decomposition algorithm for metal clusters at the atomic scale, Mechanical response of a short fiber-reinforced thermoplastic: experimental investigation and continuum mechanical modeling, Micropolar plasticity. I: Modeling based on curvature tensors related by mixed transformations, Modeling of twinning-induced plasticity using crystal plasticity and thermodynamic framework, A decomposition of Laplace stretch with applications in inelasticity, Serial deformation maps and elasto-plastic continua, Homogenization in BV of a model for layered composites in finite crystal plasticity, A new class of plastic flow evolution equations for anisotropic multiplicative elastoplasticity based on the notion of a corrector elastic strain rate, Numerical study of microstructures in single-slip finite elastoplasticity, On purely mechanical simple kinematic internal constraints, A model for irreversible deformation phenomena driven by hydrostatic stress, deviatoric stress and an externally applied field, Phase field modeling of fracture in porous plasticity: a variational gradient-extended Eulerian framework for the macroscopic analysis of ductile failure, High-order NURBS elements based isogeometric formulation for swellable soft materials, Computational anisotropic hardening multiplicative elastoplasticity based on the corrector elastic logarithmic strain rate, Finite element analysis of internally balanced elastic materials, Coupled phase-field and plasticity modeling of geological materials: from brittle fracture to ductile flow, A viscoactive constitutive modeling framework with variational updates for the myocardium, Overcoming volumetric locking in material point methods, Theoretical development of continuum dislocation dynamics for finite-deformation crystal plasticity at the mesoscale, On the sequential change in the mechanisms of production of large irreversible deformations, Hyper-dual number-based numerical differentiation of eigensystems, Crack occurrence in bodies with gradient polyconvex energies, On static and evolutionary homogenization in crystal plasticity for stratified composites, A thermodynamically consistent finite strain phase field approach to ductile fracture considering multi-axial stress states, A consistent algorithm for finite-strain visco-hyperelasticity and visco-plasticity of amorphous polymers, A discussion of multiplicative decompositions and strain measures, Multi-physical modeling and numerical simulation of the thermo-hygro-mechanical treatment of wood, An orthotropic plasticity model at finite strains with plasticity-induced evolution of orthotropy based on a covariant formulation, Phase field microelasticity accommodating large deformation and modeling of voids evolution under creep, Numerical implementation of the multiplicative hyperelastic-based extended subloading surface plasticity model, Multiscale modeling of polycrystalline materials with Jacobian-free multiscale method (JFMM), A large strain thermodynamically-based viscoelastic-viscoplastic model with application to finite element analysis of polytetrafluoroethylene (PTFE), A finite strain elastoplastic model based on Flory's decomposition and 3D FEM applications, Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method, Numerical calculation of thermo-mechanical problems at large strains based on complex step derivative approximation of tangent stiffness matrices, Invariance in non-isothermal generalized plasticity, Stress induced phase transitions in silicon, Some issues associated with the intermediate space in single-crystal plasticity, Local adiabatic heating effect in finite-strain elastic-plastic torsion, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. I: Continuum formulation, Large strain elasto-plastic model of paper and corrugated board, Thermoviscoplastic modelling of asymmetric effects for polymers at large strains, Finite viscoplasticity of amorphous glassy polymers in the logarithmic strain space, Issues on the constitutive formulation at large elastoplastic deformations. I: Kinematics, A biphasic continuum approach for viscoelastic high-porosity foams: comprehensive theory, numerics, and application, Constitutive equation of a non-simple elastic plastic material, A viscoplastic formulation with elasticity for transient metal forming, A finite strain constitutive model for metal powder compaction using a unique and convex single surface yield function, Materials with elastic range: A theory with a view toward applications. I, Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model, On the large strain inelastic analysis in natural formulation. I: Quasistatic problems, The generalized Hill model: a kinematic approach towards active muscle contraction, Plastische Inkompressibilität bei großen Formänderungen, Accounting for the elastic properties of viscoplastic lubricant between coaxial rotating cylinders, Incremental constitutive equation for large strain elasto plasticity, Histories of the stress, strain-rate, temperature and spin in steady state penetration problems, Some remarks on the decomposition of deformations and mechanical work, On nonlocal plasticity, New viscoelastic fluid theory based upon the concept of an intermediate state, On the elastoviscoplasticity of ferromagnetic crystals, On neutron irradiation of an isotropic thermoplastic body, Predicting the Hall-Petch effect in fcc metals using non-local crystal plasticity, Studies on plastic structures: stability, anisotropic hardening, cyclic loads, Finite anisotropic elasticity and material frame indifference from a nonequilibrium thermodynamics perspective, Thermodynamic considerations on non-isothermal finite anisotropic elasto-viscoplasticity, On the mechanics of large inelastic deformations: Noncoaxiality, axial effects in torsion and localization, On plastic anisotropy of constitutive model for rate-dependent single crystal, A large strain plasticity model for implicit finite element analyses, A model for finite strain elasto-plasticity based on logarithmic strains: Computational issues, Large elastic-plastic deformations of fibrous metal matrix composites, Micromechanics of toughening in ductile/brittle polymeric microlaminates: Effect of volume fraction, Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal, An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals, On the mechanics of large inelastic deformations: Kinematics and constitutive modeling, A prescription for the identification of finite plastic strain, Study and validation of a variational theory of thermo-mechanical coupling in finite visco-plasticity, On the application of dual variables in continuum mechanics, Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory, Associative coupled thermoplasticity at finite strains: Formulation, numerical analysis and implementation, On improved network models for rubber elasticity and their applications to orientation hardening in glassy polymers, Bifurcation and uniqueness in dynamics of elastic-plastic continua, On the unification of the mathematical theory of plasticity and dislocation theory by using thermodynamics. I: Basic theory, Kinematics of deformation processes in materials subjected to finite elastic-plastic strains, Einige Betrachtungen zur Thermodynamik großer elasto-plastischer Formänderungen, Finite deformation solution of a dynamic problem of combined compressive and shear loading for an elastic-plastic half-space, Existence and uniqueness of elastic-plastic interfaces, Continuity in the plastic strain rate and its influence on texture evolution, Energetic dislocation interactions and thermodynamical aspects of strain gradient crystal plasticity theories, On finite strain micromorphic elastoplasticity, Constitutive modeling of shape memory polymer based self-healing syntactic foam, A formulation for the micromorphic continuum at finite inelastic strains, Numerical simulation of ductile fracture with the Rousselier constitutive law, Finite strain viscoplasticity with nonlinear kinematic hardening: phenomenological modeling and time integration, Analysis of fracture in thin shells by overlapping paired elements, Incremental formulation in nonlinear mechanics and large strain elasto- plasticity - natural approach. I, Incremental formulation in nonlinear mechanics and large strain elasto- plasticity - natural approach. II, Variational gradient plasticity at finite strains. II: Local-global updates and mixed finite elements for additive plasticity in the logarithmic strain space, Finite element method - The natural approach, Asymptotic finite deformation analysis of growing crack fields in elastic-perfectly plastic materials, Prediction of stored energy in polycrystalline materials during cyclic loading, Consistent integration of the constitutive equations of Gurson materials under adiabatic conditions, From dislocation motion to an additive velocity gradient decomposition, and some simple models of dislocation dynamics, Finite stretching and shearing of an internally balanced elastic solid, Flow of an elastoviscoplastic material between rotating cylindrical surfaces with nonrigid cohesion, Computational aspects of tangent moduli tensors in rate-independent crystal elastoplasticity, Material forces for inelastic models at large strains: Application to fracture mechanics, An energy-deformation decomposition for morphoelasticity, A critical review of the state of finite plasticity, Finite deformation analysis of restrictions on moving strong discontinuity surfaces in elastic-plastic materials: Quasi-static and dynamic deformations, An adaptive discontinuous Galerkin method for viscoplastic analysis, A nonlocal strain gradient plasticity theory for finite deformations, Certain basic issues in finite-deformation continuum plasticity, Coupled thermo-mechanical modelling of bulk-metallic glasses: theory, finite-element simulations and experimental verification, Variational and projection methods for the volume constraint in finite deformation elasto-plasticity, A large deformation anisotropic thermoviscoplastic constitutive model, Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers, On a formulation for anisotropic elastoplasticity at finite strains invariant with respect to the intermediate configuration, An analysis of metal forming processes using large deformation elastic- plastic formulations, A thermo-mechanically coupled theory for large deformations of amorphous polymers. I: Formulation, On standard and vector finite element analysis of a strict anti-plane shear plasticity model with elastic curvature, Volume-preserving energy-momentum schemes for isochoric multiplicative plasticity, Macroscopic effects of micro-shear banding in plasticity of metals, An Eulerian-based approach to elastic-plastic decomposition, On anisotropic flow rules in multiplicative elastoplasticity at finite strains, Study on the generalized Prandtl-Reuss constitutive equation and the corotational rates of stress tensor, An Eulerian multiplicative constitutive model of finite elastoplasticity, Effects of microscopic boundary conditions on plastic deformations of small-sized single crystals, Isotropic hardening in micropolar plasticity, Finite element analysis of crystalline solids, Tangent modulus tensor in plasticity under finite strain, A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations, Finite element analysis of a class of problems in finite elastoplasticity based on the thermodynamical theory of materials of type N., Plasticity of compressible/dilatant rocklike materials, Elastoplastic torsion of a cylindrical rod for finite deformations, Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids, The finite deformation of rate-dependent polycrystals. I: A self- consistent framework, Finite element simulations of shear localization in plate impact, Adaptive enrichment meshfree simulation and experiment on buckling and post-buckling analysis in sheet metal forming, A micromechanical model of hardening, rate sensitivity and thermal softening in BCC single crystals, A framework for multiplicative associative isotropic elasto-plasticity, that preserves the structure of the infinitesimal theory, Elastoplastic constitutive analysis with the yield surface in strain space, Comparison of different finite deformation inelastic damage models within multiplicative elastoplasticity for ductile materials, A unified theoretical structure for modeling interstitial growth and muscle activation in soft tissues, Strongly objective numerical implementation and generalization of a unified large inelastic deformation model with a smooth elastic-inelastic transition, \(u\)-\(w\) formulation for dynamic problems in large deformation regime solved through an implicit meshfree scheme, Significant differences in the mechanical modeling of confined growth predicted by the Lagrangian and Eulerian formulations, Incremental constitutive models for elastoplastic materials undergoing finite deformations by using a four-dimensional formalism, Development of a finite strain two-network model for shape memory polymers using QR decomposition, Stress-assist chemical reactions front propagation in deformable solids, An elasto-visco-plastic model of cell aggregates, The upper triangular decomposition of the deformation gradient: possible decompositions of the distortion tensor, Frameworks for finite strain viscoelastic-plasticity based on multiplicative decompositions. I: Continuum formulations, Energy consistent algorithms for dynamic finite deformation plasticity, On the advantages of a geometrical viewpoint in the derivation of Lagrange's equations for a rigid continuum, Paul M. Naghdi (1924-1994), Elastic-plastic crystal mechanics for low symmetry crystals, Requirements of thermodynamics in the analysis of elastic-plastic shock waves, Thermodynamic restrictions on constitutive equations for second-deformation-gradient inelastic behavior, A model for the volumetric growth of a soft tissue, Large deformation finite element analysis with inelastic constitutive models including damage, A theory of large-strain isotropic thermoplasticity based on metric transformation tensors, A remark on consequences of the work assumption of Naghdi and Trapp for elastic-plastic materials, A geometric rationale for invariance, covariance and constitutive relations, Comparison of two models for anisotropic hardening and yield surface evolution in bcc sheet steels, Macroscopic theory and nonlinear finite element analysis of micromechanics of single crystals at finite strains, Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations, Instability phenomena in plasticity: Modelling and computation, Single crystal and polycrystal elasto-viscoplasticity: Application to earing in cup drawing of F.C.C. materials, Mixture theory for a thermoelasto-plastic porous solid considering fluid flow and internal mass exchange, Generalized micromorphic solids and fluids, Removal of unphysical arbitrariness in constitutive equations for elastically anisotropic nonlinear elastic-viscoplastic solids, Shape design sensitivity analysis of viscoplastic structures, On the numerical treatment of finite deformations in elastoviscoplasticity, Theory and analysis of shells undergoing finite elastic-plastic strains and rotations, Finite elastoplastic deformations of space-curved membranes, Shape-memory alloys: Modelling and numerical simulations of the finite-strain superelastic behavior, A parallel finite element method for the analysis of crystalline solids, A general theory of finite inelastic deformation of metals based on the concept of unified constitutive models, On the role of the Finsler geometry in the theory of elasto-plasticity, On theory and numerics of large viscoplastic deformation, A multiplicative finite element algorithm for the inhomogeneous swelling of polymeric gels, Computational modeling of coupled cardiac electromechanics incorporating cardiac dysfunctions, A micromechanical study of the evolution of the yield locus of an 1100 aluminium sheet due to rolling, Propagation of infinitesimal thermo-mechanical waves during the finite-deformation loading of a viscoelastic material: general theory, A hyperelastic nonlinear model for a nearly incompressible particulate composite, The postulate of realizability: Formulation and applications to the post-bifurcation behaviour and phase transitions in elastoplastic materials. I, Dislocations in crystals and in continua: A confrontation, Nonlinear continuum theory of dislocations, Views on multiplicative elastoplasticity and the continuum theory of dislocations, Necking of anisotropic micro-films with strain-gradient effects, Numerical concepts for rate-independent single crystal plasticity, Visco-electro-elastic models of fiber-distributed active tissues, Swelling and growth: a constitutive framework for active solids, Global existence results for viscoplasticity at finite strain, On the decomposition of the deformation gradient in plasticity, Linearized plasticity is the evolutionary \(\Gamma\)-limit of finite plasticity, Concurrent finite element analysis of periodic boundary value problems., Thermal effects in the superelasticity of crystalline shape-memory materials, Kinematic hardening in large strain plasticity, Configurational forces and their application in solid mechanics, The polycrystalline plasticity due to slip and twinning during magnesium alloy forming, Framework for deformation induced anisotropy in glassy polymers, A multiscale model for eccentric and concentric cardiac growth through sarcomerogenesis, Concurrent multiscale modeling of microstructural effects on localization behavior in finite deformation solid mechanics, Thermodynamically-consistent constitutive modeling of hardening asymmetry including isotropic ductile damage for Mg alloys, A continuum treatment of growth in biological tissue: the coupling of mass transport and mechanics, The development and deceleration of the flow of an elastoplastic medium in a cylindrical tube, Global and local mechanical responses for necking of rectangular bars using updated and total Lagrangian finite element formulations, Stress update algorithm for enhanced homogeneous anisotropic hardening model, Multiplicative electro-elasticity of electroactive polymers accounting for micromechanically-based network models, A conservative formulation for plasticity, A large-strain elastic-plastic finite element analysis of rolling process, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers., Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation., Materials with elastic range: A theory with a view toward applications. II, On the geometrical material structure of anelasticity, A general framework for the numerical solution of problems in finite elasto-plasticity, A formulation of finite elastoplasticity based on dual co- and contra-variant eigenvector triads normalized with respect to a plastic metric, On modelling the elasto-viscoplastic response of metals using polycrystal plasticity, On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications, Relaxation-type equations for viscoelastic media with finite deformations, The theory of elastic-plastic deformation at finite strain with induced anisotropy modeled as combined isotropic-kinematic hardening, A time integration procedure for plastic deformation in elastic- viscoplastic metals, Multi-phase equilibrium of crystalline solids, On the plasticity of single crystals: Free energy, microforces, plastic-strain gradients, Superimposed finite elastic-viscoelastic-plastoelastic stress response with damage in filled rubbery polymers. Experiments, modelling and algorithmic implementation, Large inelastic strain analysis by multilayer shell elements, Thermomechanical response of solids at high strains - natural approach, Shear band bifurcations in ductile single crystals, Finite element procedure for solving contact thermoelastoplastic problems at large strains, normal and high pressures., A theory of subgrain dislocation structures, Generalized standard media and variational principles in classical and finite strain elastoplasticity, Finite deformation plasticity based on the additive split of the rate of deformation and hyperelasticity, A model of adaptive links in finite viscoelastoplasticity of glassy polymers., An extension of 3-D procedure to large strain analysis of shells, Bifurcation of elastoplastic solids to shear band mode at finite strain., Anisotropic additive plasticity in the logarithmic strain space: Modular kinematic formulation and implementation based on incremental minimization principles for standard materials., Finite element simulation of strain localization with large deformation: Capturing strong discontinuity using a Petrov-Galerkin multiscale formulation, Using finite strain 3D‐material models in beam and shell elements, Limits to the Jaumann stress rate, Incremental representation of viscoelastic-plastic materials, On spatial and material covariant balance laws in elasticity, On the Nonlinear Mechanics of Bravais Crystals with Continuous Distributions of Defects, Evolution of elastic properties in finite poroplasticity and finite element analysis, Geometric characterization of continuously defective elastic crystals, Computer simulation of crash phenomena, Experimental and numerical investigation of the deformation behaviour of cables and thin beam-like structures under multi-axial loading, Development, implementation, and assessment of a continuum model of anisotropic behavior of polycrystalline materials due to texture using a second-order structure tensor, Continuum Mechanics of the Interaction of Phase Boundaries and Dislocations in Solids, Modeling Biomechanics in the Healthy and Diseased Heart, Least-Squares Finite Element Formulation for Finite Strain Elasto-Plasticity, EXPONENTIAL MAP ALGORITHM FOR STRESS UPDATES IN ANISOTROPIC MULTIPLICATIVE ELASTOPLASTICITY FOR SINGLE CRYSTALS, Mathematical Modeling of Morphogenesis in Living Materials, Variational Modeling of Slip: From Crystal Plasticity to Geological Strata, Construction of Statistically Similar RVEs, Erratum, Morpho-elastodynamics: the long-time dynamics of elastic growth, On Finite Displacement of an Elastoviscoplastic Material in a Gap between Two Rigid Coaxial Cylindrical Surfaces, Remodelling in statistically oriented fibre-reinforced materials and biological tissues, The Clausius—Clapeyron equations for phase transitions of the first kind in a thermoelastic material, Geometrically non‐linear method of incompatible modes in application to finite elasticity with independent rotations, A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using the logarithmic stress and strain measures, Geometry, analysis, and morphogenesis: Problems and prospects, On the linear relations of V–ln p and ln v–ln p for isotropic consolidation of soils, Elasto-plastic evolution of single crystals driven by dislocation flow, Large strain constitutive modelling and computation for isotropic, creep elastoplastic damage solids, Numerical Investigation of High-Order Solid Finite Elements for Anisotropic Finite Strain Problems, The variational formulation and solution of problems of finite‐strain elastoplasticity based on the use of a dissipation function, Limitations to the large strain theory, On consistent stress rates in solid mechanics: Computational implications, A time integration algorithm for elasto‐viscoplastic cubic crystals applied to modelling polycrystalline deformation, On the indentation of a polymeric membrane, Variational Formulation of the Crack Problem for an Elastoplastic Body at Finite Strain, Existence for dislocation-free finite plasticity, ON ACCOUNT OF VISCOUS PROPERTIES OF MATERIALS IN THE THEORY OF LARGE ELASTOPLASTIC STRAINS, Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions, Axisymmetric three‐ and four‐node finite elements for large strain elastoplasticity, Solution of the slump test using a finite deformation elasto‐plastic Drucker‐Prager model, Numerical integration of lattice rotation in polycrystal plasticity, Elastic Growth Models, Use of quasi-Newton methods for large strain elastic-plastic finite element computations, An avascular tumor growth model based on porous media mechanics and evolving natural states, An analysis of thermal effects of coupled thermo‐plasticity in metal forming processes, A fourth-order gauge-invariant gradient plasticity model for polycrystals based on Kröner’s incompatibility tensor, Unnamed Item, On the mechanics of thin films and growing surfaces, A micro‐mechanically based quadratic yield condition for textured polycrystals, On Mathematical Aspects of Dual Variables in Continuum Mechanics. Part 1: Mathematical Principles, A nonlinear thermomechanical formulation for anisotropic volume and surface continua, On Mathematical Aspects of Dual Variables in Continuum Mechanics. Part 1: Mathematical Principles, Smooth finite strain plasticity with non-local pressure support, A 3D SMA constitutive model in the framework of finite strain, On Mathematical Aspects of Dual Variables in Continuum Mechanics. Part 1: Mathematical Principles, A Kinematics of Defects in Solid Crystals, Reference map technique for incompressible fluid–structure interaction, Variational constitutive updates for microstructure evolution in hcp metals, Formulation methods of geometric and material nonlinearity problems, Plastic Intermediate Configuration and Related Spatial Differential Operators in Micromorphic Plasticity, Relaxation of a class of variational models in crystal plasticity, Unnamed Item, A grain boundary model considering the grain misorientation within a geometrically nonlinear gradient-extended crystal viscoplasticity theory, Microstructure-sensitive critical plastic strain energy density criterion for fatigue life prediction across various loading regimes, The generalized viscoelastic spring, Finite deformation formulation for embedded frictional crack with the extended finite element method, Ductile damage analysis of elasto-plastic shells at large inelastic strains, On Mathematical Aspects of Dual Variables in Continuum Mechanics. Part 1: Mathematical Principles, A covariant constitutive theory for anisotropic hyperelastic solids with initial strains, Unnamed Item, Unnamed Item, Mechanics of isotropic elastic‐plastic flow in pressure‐sensitive damaging bodies under finite strains – revisited, Two-scale method for shear bands: thermal effects and variable bandwidth, Elastic‐plastic materials as simple materials, On the modelling of non‐linear kinematic hardening at finite strains with application to springback—Comparison of time integration algorithms, Integration algorithms for planar anisotropic shells with isotropic and kinematic hardening at finite strains, Formulation of implicit finite element methods for multiplicative finite deformation plasticity, New developments in the inelastic analysis of quasistatic and dynamic problems, Computational issues in large strain elasto-plasticity: an algorithm for mixed hardening and plastic spin, Large strain static and dynamic semisaturated soil behaviour, Two-point constitutive equations and integration algorithms for isotropic-hardening rate-independent elastoplastic materials in large deformation, NOTES ON STRAIN GRADIENT PLASTICITY: FINITE STRAIN COVARIANT MODELLING AND GLOBAL EXISTENCE IN THE INFINITESIMAL RATE-INDEPENDENT CASE, On the numerical implementation of 3D rate-dependent single crystal plasticity formulations, Computations of an engine to analyze cylinder distortion, On large deformation hyperelasto‐plasticity of anisotropic materials, On the numerical implications of multiplicative inelasticity with an anisotropic elastic constitutive law, A phenomenological model of finite strain viscoplasticity with distortional hardening, A numerical method for analysis of bounded metalworking processes, Fracture mechanical behaviour of visco-elastic materials: application to the so-called dwell-effect, On constitutive and configurational aspects of models for gradient continua with microstructure, Material rotating frame, rate-independent plasticity with regularization of Schmid law and study of channel-die compression, An Eulerian formulation of inelasticity: from metal plasticity to growth of biological tissues, On the existence of elastic minimizers for initially stressed materials, Capturing strain localization in dense sands with random density, Inelastic finite strain analysis of structures subjected to nonproportional loading, Unnamed Item, An energy-consistent material-point method for dynamic finite deformation plasticity, Two-scale shear band evolution by local partition of unity, Design sensitivity analysis in large deformation elasto-plastic and elasto-viscoplastic problems, Some theoretical considerations and experimental results concerning elastic-plastic stress-strain relations, Gradient Flows for Coupling Order Parameters and Mechanics, An Eulerian Nonlinear Elastic Model for Compressible and Fluidic Tissue with Radially Symmetric Growth, Extension and inflation of a thick-cylindrical tube made of isotropic compressible of Mooney-Rivlin materials: modeling and finite element simulations, Particle-based approach to the Eulerian distortion field and its dynamics, Numerical strategies for variational updates in large strain inelasticity with incompressibility constraint, An Eulerian formulation of a growing constrained elastic-viscoplastic generalized membrane, On the quasi‐yield surface concept in plasticity theory, Implementation of subloading surface model for hyperelastoplasticity with nonlinear kinematic/isotropic hardening based on reference and intermediate configurations, Linearization for finite plasticity under dislocation-density tensor regularization, Simulation of Cutting processes by the Particle Finite Element Method, Micro‐macro modelling of steel solidification: A continuum mechanical, bi‐phasic, two‐scale model including thermal driven phase transition, On the coupling of rectilinear shear and stretching in a slab made of incompressible elastic neo-Hookean materials: analytic formulation and finite element validation, Efficient numerical strategies for an implicit volume fraction transfer scheme for single crystal plasticity including twinning and secondary plasticity on the example of magnesium, Numerically efficient and robust Interior-point algorithm for finite strain rate-independent crystal plasticity, Correlation analysis of the elastic‐ideal plastic material behavior of short fiber‐reinforced composites, An elastic‐inelastic model and embedded bounce‐back control for layered printing with cementitious materials, A novel continuum mechanical framework for decoupled material behavior in thickness and in-plane directions, Model-driven identification framework for optimal constitutive modeling from kinematics and rheological arrangement, An Eulerian constitutive model for the inelastic finite strain behaviour of isotropic semi-crystalline polymers, [https://portal.mardi4nfdi.de/wiki/Publication:5652282 Einige Bemerkungen zu einer allgemeinen Klasse von Stoffgesetzen f�r gro�e elasto-plastische Form�nderungen], Non-affine fiber reorientation in finite inelasticity, Relativistic constitutive modeling of inelastic deformation of continua moving in space-time, Comparison behavior of two compressible isotropic hyperelastic models in framework of a coupled axial stretch to simple shear test, Two-dimensional growth of incompressible and compressible soft biological tissues, A multiphysical computational model of myocardial growth adopted to human pathological ventricular remodelling, Stress‐modulated growth in the presence of nutrients—Existence and uniqueness in one spatial dimension, A homogenization result in finite plasticity, Modelling diffusion induced swelling behaviour of natural rubber in an organic liquid, On the interplay of anisotropy and geometry for polycrystals in single‐slip crystal plasticity, Incompatible deformations – plastic intermediate configuration, Anisotropic elastic–plastic analysis of shells at large strains. A comparison of multiplicative and additive approaches to enhanced finite element design and constitutive modelling, Some theoretical and computational aspects of single‐crystal strain‐gradient plasticity, Finite Plasticity in $P^\top\!P$. Part II: Quasi-Static Evolution and Linearization, Multiple decomposition in finite deformation theory, On the characterization of geometrically necessary dislocations in finite plasticity, Dissipation in porous metal plasticity and ductile fracture, The role of Eshelby stress in composition-generated and stress-assisted diffusion, A model of finite strain viscoplasticity based on unified constitutive equations. Theoretical and computational considerations with applications to shells, A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations, Curl bounds Grad on SO(3), A general theory of finite deformation of viscoplastic thin shells, A general inelastic internal state variable model for amorphous glassy polymers, Geometric continuum mechanics, Local existence and uniqueness for quasistatic finite plasticity with grain boundary relaxation, Computational modelling of plasticity induced by martensitic phase transformations, Lower semicontinuity and existence of minimizers in incremental finite‐strain elastoplasticity, Quasistatic evolution models for thin plates arising as low energy Γ-limits of finite plasticity, Quasistatic evolution for dislocation-free finite plasticity, A Compact Eulerian Interface–Capturing Algorithm for Compressible Multimaterial Elastic–Plastic Flows with Mie–Gr ¨uneisen Equation of State