A subdivision-stabilized B-Spline mixed material point method
From MaRDI portal
(Redirected from Publication:6201153)
Recommendations
- A stabilized mixed implicit material point method for non-linear incompressible solid mechanics
- Circumventing volumetric locking in explicit material point methods: A simple, efficient, and general approach
- A variationally consistent reproducing kernel enhanced material point method and its applications to incompressible materials
- Analysis and mitigation of spatial integration errors for the material point method
Cites work
- \(\overline {\text B}\) and \(\overline {\text F}\) projection methods for nearly incompressible linear and nonlinear elasticity and plasticity using higher-order NURBS elements
- A convected particle domain interpolation technique to extend applicability of the material point method for problems involving massive deformations
- A finite element formulation in boundary representation for the analysis of nonlinear problems in solid mechanics
- A fixed-grid B-spline finite element technique for fluid-structure interaction
- A mixed polygonal finite element formulation for nearly-incompressible finite elasticity
- A note on enhanced strain methods for large deformations
- A numerical solution of the Navier-Stokes equations using the finite element technique
- A numerical strategy for investigating the kinetic response of stimulus-responsive hydrogels
- A Pressure Projection Method for Nearly Incompressible Rubber Hyperelasticity, Part I: Theory
- A Pressure Projection Method for Nearly Incompressible Rubber Hyperelasticity, Part II: Applications
- A quadrilateral mixed finite element with two enhanced strain modes
- A stabilized mixed implicit material point method for non-linear incompressible solid mechanics
- A stable finite element for the Stokes equations
- A technique to develop mesh-distortion immune finite elements
- A total-Lagrangian material point method for solid mechanics problems involving large deformations
- An improved quadrature scheme in B-spline material point method for large-deformation problem analysis
- An isogeometric method for linear nearly-incompressible elasticity with local stress projection
- Analysis and reduction of quadrature errors in the material point method (MPM)
- Application of a particle-in-cell method to solid mechanics
- Controlling the onset of numerical fracture in parallelized implementations of the material point method (MPM) with convective particle domain interpolation (CPDI) domain scaling
- Distribution coefficient algorithm for small mass nodes in material point method
- Effects of element distortions on the performance of isoparametric elements
- Extended B‐spline‐based implicit material point method enhanced by F‐bar projection method to suppress pressure oscillation
- F‐bar‐based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking
- scientific article; zbMATH DE number 4033243 (Why is no real title available?)
- scientific article; zbMATH DE number 3529634 (Why is no real title available?)
- scientific article; zbMATH DE number 1342430 (Why is no real title available?)
- scientific article; zbMATH DE number 792231 (Why is no real title available?)
- IGA-MPM: the isogeometric material point method
- ILS-MPM: an implicit level-set-based material point method for frictional particulate contact mechanics of deformable particles
- Implicit formulation of material point method for analysis of incompressible materials
- Incompressible material point method for free surface flow
- Isogeometric analysis. Toward integration of CAD and FEA
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Material point method enhanced by modified gradient of shape function
- Material point methods applied to one-dimensional shock waves and dual domain material point method with sub-points
- Mixed stress-displacement isogeometric collocation for nearly incompressible elasticity and elastoplasticity
- Modeling curvature-resisting material surfaces with isogeometric analysis
- Modelling contacts with a total Lagrangian material point method
- Nonlinear finite element methods
- Nonlinear solid mechanics. A continuum approach for engineering
- On Lagrangian mechanics and the implicit material point method for large deformation elasto-plasticity
- On the enhancement of low-order mixed finite element methods for the large deformation analysis of diffusion in solids
- On the use of domain-based material point methods for problems involving large distortion
- Package for Calculating with B-Splines
- Reduced quadrature for finite element and isogeometric methods in nonlinear solids
- Second-order convected particle domain interpolation (CPDI2) with enrichment for weak discontinuities at material interfaces
- Solving quasi-static equations with the material-point method
- Stabilization of Low-order Mixed Finite Elements for the Stokes Equations
- Stabilized low-order finite elements for coupled solid-deformation/fluid-diffusion and their application to fault zone transients
- Stabilized low-order finite elements for frictional contact with the extended finite element method
- Stabilized material point methods for coupled large deformation and fluid flow in porous materials
- Stabilized mixed finite elements for deformable porous media with double porosity
- Subdivision based mixed methods for isogeometric analysis of linear and nonlinear nearly incompressible materials
- Subdivision-stabilised immersed b-spline finite elements for moving boundary flows
- The finite element method with Lagrangian multipliers
- The inf-sup test
- The material-point method for granular materials
- Treatment of near-incompressibility and volumetric locking in higher order material point methods
- Using poro-elasticity to model the large deformation of tissue during subcutaneous injection
Cited in
(16)- A hybrid polymer-water peridynamics model for ballistic penetration damage of soft materials
- A total-Lagrangian material point method for coupled growth and massive deformation of incompressible soft materials
- Mixed material point method formulation, stabilization, and validation for a unified analysis of free-surface and seepage flow
- Simulation of fluid-structure interaction using the density smoothing B-spline material point method with a contact approach
- Mesh topology-based spurious pressure stabilization in 3D finite elasticity using Voronoi tessellations
- The virtual stress boundary method to impose nonconforming Neumann boundary conditions in the high-order material point method
- Enforcement of non-conforming Dirichlet boundary conditions in the implicit material point method using the direct elimination method
- Large deformation analysis of near-incompressible material using unified exact quadrature B-spline material point method
- Extended mixed B-spline material point method with Nitsche's method for quasi-compressible soft materials
- Smoothed total Lagrangian material point method for dynamic large deformation analysis of soft materials
- The stress-continuous material point method: a technique to alleviate cell-crossing instability while retaining linear shape functions
- Error analysis of the moving least square material point method for large deformation problems
- An implicit coupled MPM formulation for static and dynamic simulation of saturated soils based on a hybrid method
- Implicit stabilized non-ordinary state-based peridynamics for finite deformation and fracture analysis of nearly incompressible materials
- A stable poro-mechanical formulation for material point methods leveraging overlapping meshes and multi-field ghost penalisation
- An extended B-spline-based material point method for contact problems
This page was built for publication: A subdivision-stabilized B-Spline mixed material point method
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q6201153)
