Cited in
(only showing first 100 items - show all)- Simulation of temperature distribution and solidification in direct chill casting of Al-Si alloy
- Computational study of free-stream turbulence effects on film cooling using two different models
- Effects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme
- On the meshfree particle methods for fluid-structure interaction problems
- A new interface‐capturing discretization scheme for numerical solution of the volume fraction equation in two‐phase flows
- Critical evaluation of CFD codes for interfacial simulation of bubble‐train flow in a narrow channel
- On aerodynamic droplet breakup
- Co-simulations of discrete and finite element codes
- Unsteady RANS modeling of flow around two-dimensional rectangular cylinders with different side ratios at Reynolds number \(6.85 \times 10^5\)
- An open-source ABAQUS implementation of the scaled boundary finite element method to study interfacial problems using polyhedral meshes
- Characterizing transport and deposition of particulate pollutants in a two-zone chamber using a Markov chain model combined with computational fluid dynamics
- Influence of tunnel length on the pressure wave generated by high-speed trains passing each other
- The effect of actuation frequency on the plasma synthetic jet
- Problem of non-uniqueness of steady-state hypersonic flow past bodies with a cylindrical frontal bluntness
- On spherical shock wave focusing in air -- a computational study
- Wetting phenomena during processing of high-viscosity shear-thinning fluid
- Comparison of the finite volume and lattice Boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures
- Discrete-time dynamical maximum power tracking control for a vertical axis water turbine with retractable blades
- A pressure-correction procedure with high-order schemes implemented on unstructured meshes
- scientific article; zbMATH DE number 6715159 (Why is no real title available?)
- Finite-volume modelling of system with compressible flow propelled and actuated body motion
- Green's function, temperature in a convectively cooled sphere with arbitrarily located spherical heat sources
- Parallel uniform mesh multiplication applied to a Navier-Stokes solver
- The application of the global quasi-linearisation technique to the analysis of the cyclohexane/air mixture autoignition
- Numerical study on transient local entropy generation in pulsating turbulent flow through an externally heated pipe
- Free jet issuing from a pipe with a triangular collar: A numerical simulation
- A partitioned strongly coupled fluid-structure interaction method to model heart valve dynamics
- Coherent structure in flow over a slitted bluff body
- Preconditioned Krylov subspace methods used in solving two-dimensional transient two-phase flows
- A 2D finite-element scheme for fluid-solid-acoustic interactions and its application to human phonation
- Numerical investigation into the effects of wall roughness on a gas-particle flow in a 90\(^\circ \) bend
- Modeling and Numerical Simulation of Fiber Dynamics
- Von Neumann stability analysis of first-order accurate discretization schemes for one-dimensional (1D) and two-dimensional (2D) fluid flow equations
- Estimation of wind turbine blade aerodynamic performances computed using different numerical approaches
- Multiphase modelling of pouring glass over the spout lip of an industrial float in the flat glass forming process
- Predicting initial erosion during the hole erosion test by using turbulent flow CFD simulation
- The effect of cyclone vortex finder dimensions on the flow pattern and performance using LES
- Numerical simulation of spray combustion of conventional fuels and Biofuels
- Numerical simulation of a vertical axis wind turbine airfoil experiencing dynamic stall at high Reynolds numbers
- Nonintrusive continuum sensitivity analysis for fluid applications
- Computer simulation of flow reactors
- CFD studies on burner secondary airflow
- Computation of an unsteady complex geometry flow using novel non‐linear turbulence models
- Numerical drag prediction of NASA Common research models using different turbulence models
- Numerical simulation and experiments on turbulent air flow around the semi-circular profile at zero angle of attack and moderate Reynolds number
- Validation of a CFD model for flow in meandering rivers using an experimental test-setup: first results
- Inverse thermal analysis of the neonatal brain cooling process
- Constructal multiscale cylinders rotating in cross-flow
- Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process
- Advected turbulent line thermal driven by concentration difference.
- Modeling of the binary solution spill consequences using FLUENT software
- CFD, a design tool for a new hot metal desulfurization technology
- Computational fluid dynamics applications in cardiovascular medicine -- from medical image-based modeling to simulation: numerical analysis of blood flow in abdominal aorta
- Effect of thermal buoyancy on vortex shedding behind a square cylinder in cross flow at low Reynolds numbers
- A computational study of gas flow in a De-Laval micronozzle at different throat diameters
- Influence of co-axial airflow and volume ratio on thermo-capillary convection in half floating zones
- Suboptimal control of circular cylinder wakes using van der Pol oscillator
- Computational fluid dynamics (CFD) software tools for microfluidic applications - a case study
- A numerical study of developing slurry flow in the entrance region of a horizontal pipe
- 2-D and 3-D numerical modelling of a dynamic resonant shear stress sensor
- Investigation of density flow in dam reservoirs using a three-dimensional mathematical model including Coriolis effect
- Simulation of supercritical flow in crossroads: confrontation of a 2D and 3D numerical approaches to experimental results
- Fluid-fiber-interactions in rotational spinning process of glass wool production
- A fully coupled, transient double-diffusive convective model for salt-gradient solar ponds
- Effect of turbulence and devolatilization models on coal gasification simulation in an entrained-flow gasifier
- Novel pressure inlet and outlet boundary conditions for smoothed particle hydrodynamics, applied to real problems in porous media flow
- Numerical simulation of steady flow fields in coiled flow inverter
- Inertial capture in flow through porous media
- Applied modelling for bio and lean gas fired micro gas turbines
- CFD analysis of performance characteristics of S-shaped diffusers with combined horizontal and vertical offsets
- Prediction of the droplet size distribution in aerodynamic droplet breakup
- Simulation of phosphine flow in vertical grain storage: a preliminary numerical study
- Heat transfer in trapezoidal microchannels of various aspect ratios
- Optimization of high-pressure shell-and-tube heat exchanger for syngas cooling in an IGCC
- A current density conservative scheme for incompressible MHD flows at a low magnetic Reynolds number. II: On an arbitrary collocated mesh
- Applied computational aerodynamics. A modern engineering approach
- Performance of turbulence models for flows through rough pipes
- A high-resolution penalization method for large Mach number flows in the presence of obstacles
- Object-oriented sub-zonal modelling for efficient energy-related building simulation
- Probabilistic approach for break-up and coalescence in bubbly flow and coupling with CFD codes
- Convergence acceleration of segregated algorithms using dynamic tuning additive correction multigrid strategy
- Numerical simulation of wear-related problems in a blast furnace runner
- Numerical investigation of heat and mass transfer from an evaporating meniscus in a heated open groove
- CFD simulation of the two-phase flow for a falling film microreactor
- Numerical study for laminar wavy motions of liquid film flow on vertical wall
- Flow currents and ventilation in Langstroth beehives due to brood thermoregulation efforts of honeybees
- Energy losses and heat transfer enhancement in transversally corrugated pipes
- Formation of uniformly sized metal droplets from a capillary jet by electromagnetic force
- Computational fluid dynamics and experimental study of the hydrodynamics of a gas-solid tapered fluidized bed
- FVM-BEM method based on the Green's function theory for the heat transfer problem in buried co-axial exchanger
- Numerical analysis of water forced convection in channels with differently shaped transverse ribs
- A two-fluid model for reactive dilute solid-liquid mixtures with phase changes
- A numerical model for transport in flat heat pipes considering wick microstructure effects
- Free surface flow simulation by a viscous numerical cylindrical tank
- Effects of phase shift on the heat transfer characteristics in pulsating mixed convection flow in a multiple vented cavity
- Auto-ignition of diesel spray using the PDF-eddy break-up model
- Using deep learning to extend the range of air pollution monitoring and forecasting
- An enhanced thermal conduction model for the prediction of convection dominated solid-liquid phase change
- Analytical characterization of heat transport through biological media incorporating hyperthermia treatment
- Numerical simulation of laminar co-flow methane–oxygen diffusion flames: effect of chemical kinetic mechanisms
This page was built for software: FLUENT
