Analysis of 3D problems using a new enhanced strain hexahedral element
From MaRDI portal
Recommendations
- On enhanced strain methods for small and finite deformations of solids
- A new volumetric and shear locking‐free 3D enhanced strain element
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- An enhanced strain 3D element for large deformation elastoplastic thin-shell applications
- An improved EAS brick element for finite deformation
Cites work
- A 3D brick element based on Hu-Washizu variational principle for mesh distortion
- A class of mixed assumed strain methods and the method of incompatible modes
- A constitutive frame of elastoplasticity at large strains based on the notion of a plastic metric
- A formulation of general shell elements—the use of mixed interpolation of tensorial components
- A highly efficient enhanced assumed strain physically stabilized hexahedral element
- A multiple-quadrature eight-mode hexahedral finite element for large deformation elastoplastic analysis
- A new shell element accounting for through-thickness deformation
- A new stabilization technique for finite elements in non-linear elasticity
- A one-point quadrature eight-node brick element with hourglass control
- A simple four-noded corotational shell element for arbitrarily large rotations
- A stabilised large-strain elasto-plastic Q1-P0 method
- A stabilized 3-D co-rotational formulation for geometrically nonlinear analysis of multi-layered composite shells
- A systematic construction of B-bar functions for linear and non-linear mixed-enhanced finite elements for plane elasticity problems
- A systematic development of ‘solid-shell’ element formulations for linear and non-linear analyses employing only displacement degrees of freedom
- A total lagrangian formulation for the geometrically nonlinear analysis of structures using finite elements. Part I. Two-dimensional problems: Shell and plate structures
- A uniform deformation gradient hexahedron element with artificial hourglass control
- A uniform strain hexahedron and quadrilateral with orthogonal hourglass control
- Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory
- An 8-node brick element with mixed formulation for large deformation analyses
- An Eulerian approach for large displacements of thin shells including geometrical nonlinearities
- An exact finite rotation shell theory, its mixed variational formulation and its finite element implementation
- Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems
- Design of simple low order finite elements for large strain analysis of nearly incompressible solids
- EAS‐elements for two‐dimensional, three‐dimensional, plate and shell structures and their equivalence to HR‐elements
- Element formulation and numerical techniques for stability problems in shells
- Extrapolated fields in the formulation of the assumed strain elements. II: Three-dimensional problems
- Families of 4-node and 9-node finite elements for a finite deformation shell theory. An assessment of hybrid stress, hybrid strain and enhanced strain elements
- Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: Theoretical and computational analysis
- Formulation of implicit finite element methods for multiplicative finite deformation plasticity
- Generalization of selective integration procedures to anisotropic and nonlinear media
- Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes
- Higher‐order MITC general shell elements
- Hourglass control in linear and nonlinear problems
- scientific article; zbMATH DE number 1323179 (Why is no real title available?)
- scientific article; zbMATH DE number 1050942 (Why is no real title available?)
- scientific article; zbMATH DE number 1078226 (Why is no real title available?)
- scientific article; zbMATH DE number 1089283 (Why is no real title available?)
- scientific article; zbMATH DE number 1102775 (Why is no real title available?)
- Hybrid hexahedral element for solids, plates, shells and beams by selective scaling
- Hybrid-stress solid elements for shell structures based upon a modified variational functional
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- Large elasto-plastic finite element analysis of solids and shells with the enhanced assumed strain concept
- Mixed finite element methods - reduced and selective integration techniques: a unification of concepts
- Multiple quadrature underintegrated finite elements
- Nonlinear solid mechanics. A continuum approach for engineering
- Numerical implementation of multiplicative elasto-plasticity into assumed strain elements with application to shells at large strains
- On a stress resultant geometrically exact shell model. Part V: Nonlinear plasticity: Formulation and integration algorithms
- On numerically accurate finite element solutions in the fully plastic range
- On some mixed finite element methods for incompressible and nearly incompressible finite elasticity
- On the formulation of enhanced strain finite elements in finite deformations
- On the parametrization of finite rotations in computational mechanics. A classification of concepts with application to smooth shells
- On the stability of mixed finite elements in large strain analysis of incompressible solids
- Quadrilateral elements for the solution of elasto-plastic finite strain problems
- Rational approach for assumed stress finite elements
- Shell theory versus degeneration—a comparison in large rotation finite element analysis
- Stability analysis using a geometrically nonlinear assumed strain solid shell element model
- The finite deformation theory for beam, plate and shell. V: The shell element with drilling degree of freedom based on Biot strain.
- Variational and projection methods for the volume constraint in finite deformation elasto-plasticity
Cited in
(50)- An efficient 3D enhanced strain element with Taylor expansion of the shape functions
- On enhanced strain methods for small and finite deformations of solids
- Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility
- A low-order finite element method for three dimensional linear elasticity problems with general meshes
- On stability, convergence and accuracy of bES-FEM and bFS-FEM for nearly incompressible elasticity
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- A six-node prismatic solid finite element for geometric nonlinear problems in elasticity
- Moving least-squares in finite strain analysis with tetrahedra support
- Galerkin-based finite strain analysis with enriched radial basis interpolation
- A scaled boundary finite element approach for shell analysis
- Accurate and locking-free analysis of beams, plates and shells using solid elements
- A finite strain Raviart-Thomas tetrahedron
- A finite-strain solid-shell using local Löwdin frames and least-squares strains
- Geometrically nonlinear dynamic formulation for three-dimensional co-rotational solid elements
- A semi-implicit finite strain shell algorithm using in-plane strains based on least-squares
- Generalized modal element method. II: Application to eight-node asymmetric and symmetric solid-shell elements in linear analysis
- On a new finite element technology for electromagnetic metal forming processes
- Damage modelling in metal forming problems using an implicit non-local gradient model
- On a physically stabilized one point finite element formulation for three-dimensional finite elasto-plasticity
- Blending moving least squares techniques with NURBS basis functions for nonlinear isogeometric analysis
- Finite strain plasticity, the stress condition and a complete shell model
- A piezoelectric 3D hexahedral curvilinear finite element based on the space fiber rotation concept
- The enhanced assumed strain method for the isogeometric analysis of nearly incompressible deformation of solids
- Enrichment of linear hexahedral finite elements using rotations of a virtual space fiber
- A solid-shell corotational element based on ANDES, ANS and EAS for geometrically nonlinear structural analysis
- Assumed strain nodally integrated hexahedral finite element formulation for elastoplastic applications
- A 3D Cosserat point element (CPE) for nonlinear orthotropic solids: Generalization for an initially distorted mesh and an arbitrary orientation of material orthotropy
- A reduced integration solid-shell finite element based on the EAS and the ANS concept. Large deformation problems
- Asymmetric quadrilateral shell elements for finite strains
- Assumed-deformation gradient finite elements with nodal integration for nearly incompressible large deformation analysis
- A reduced integration solid-shell finite element based on the EAS and the ANS concept - geometrically linear problems
- An improved assumed strain solid-shell element formulation with physical stabilization for geometric nonlinear applications and elastic-plastic stability analysis
- Universal three-dimensional connection hexahedral elements based on hybrid-stress theory for solid structures
- Application of the continuum shell finite element SHB8PS to sheet forming simulation using an extended large strain anisotropic elastic-plastic formulation
- New enhanced strain elements for incompressible problems
- A 3D element for non‐linear analysis of solids
- An adaptive stabilization strategy for enhanced strain methods in nonlinear elasticity
- Artificial instabilities of finite elements for nonlinear elasticity: Analysis and remedies
- Hourglassing‐ and locking‐free mesh distortion insensitive Petrov–Galerkin EAS element for large deformation solid mechanics
- Extension of the enhanced assumed strain method based on the structure of polyconvex strain-energy functions
- On transformations and shape functions for enhanced assumed strain elements
- Improving efficiency and robustness of enhanced assumed strain elements for nonlinear problems
- Geometrically nonlinear quadratic solid/solid-shell element based on consistent corotational approach for structural analysis under prescribed motion
- An improved solid-shell element based on ANS and EAS concepts
- A general element for shell analysis based on the scaled boundary finite element method
- A mixed hexahedral solid-shell finite element with self-equilibrated isostatic assumed stresses for geometrically nonlinear problems
- Modification of solid-shell elements to suppress mesh hourglassing at bifurcation point
- A constitutive-based element-by-element crack propagation algorithm with local mesh refinement
- Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process
- An improved EAS brick element for finite deformation
This page was built for publication: Analysis of 3D problems using a new enhanced strain hexahedral element
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4446842)
