Hourglass control in linear and nonlinear problems
From MaRDI portal
equations of solid mechanics in 2 and 3 dimensionshourglass control satisfies patch testhourglass modesimplementing in computer codes Laplace equationmesh stabilization techniquesmixed variational principlenature of parametersorthogonal hourglass techniquesrelate generalized stresses and strainsunder-integrated hexahedral and quadrilateral elements
Cites work
- A finite element procedure for the large deformation dynamic response of axisymmetric solids
- A stabilization matrix for the bilinear Mindlin plate element
- A stabilization procedure for the quadrilateral plate element with one‐point quadrature
- A uniform strain hexahedron and quadrilateral with orthogonal hourglass control
- scientific article; zbMATH DE number 3679327 (Why is no real title available?)
- scientific article; zbMATH DE number 3720310 (Why is no real title available?)
- scientific article; zbMATH DE number 3752403 (Why is no real title available?)
- scientific article; zbMATH DE number 3416931 (Why is no real title available?)
- Letters to the editor
- Mixed finite element methods - reduced and selective integration techniques: a unification of concepts
- Mixed finite-element approximations of linear boundary-value problems
- Recent developments in large-scale finite element Lagrangian hydrocode technology
Cited in
(only showing first 100 items - show all)- Hyperelasticity and physical shear buckling of a block predicted by the Cosserat point element compared with inelasticity and hourglassing predicted by other element formulations
- A consolidation of various approaches in developing naturally based quadrilaterals
- Efficient implementation of quadrilaterals with high coarse-mesh accuracy
- Stress projection for membrane and shear locking in shell finite elements
- Resultant-stress degenerated-shell element
- New improved hourglass control for bilinear and trilinear elements in anisotropic linear elasticity
- A one-point integration quadrilateral with hourglass control in axisymmetric geometry
- The \(C^ 0\) shell plate and beam elements freed from their deficiencies
- Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems
- Quadrilateral with high coarse-mesh accuracy for solid mechanics in axisymmetric geometry
- A new finite element formulation for computational fluid dynamics: Development of an hourglass control operator for multidimensional advective-diffusive systems
- The generation of element stiffness matrices from base matrices in the node space
- Efficient hybrid/mixed elements using admissible matrix formulation
- Four-node axisymmetric element based upon the Hellinger-Reissner functional
- A diffusion equation with hourglass control in an axisymmetric geometry
- Extrapolated fields in the formulation of the assumed strain elements. II: Three-dimensional problems
- A multiple-quadrature eight-mode hexahedral finite element for large deformation elastoplastic analysis
- A parallel multigrid method for history-dependent elastoplasticity computations
- A mixed element method in gradient plasticity for pressure dependent materials and modelling of strain localization
- On the perturbed Lagrangian formulation for nearly incompressible and incompressible hyperelasticity
- An 8-node brick element with mixed formulation for large deformation analyses
- A domain-decomposition message-passing approach to transient viscous incompressible flow using explicit time integration
- Extrapolated fields in the formulation of the assumed strain elements. I: Two-dimensional problems.
- A deformation-dependent stabilization technique, exemplified by EAS elements at large strains
- Total hourglass control for hyperelastic materials
- A scaled boundary finite element method for static and dynamic analyses of cylindrical shells
- Reduced Bézier element quadrature rules for quadratic and cubic splines in isogeometric analysis
- Improved numerical integration for locking treatment in isogeometric structural elements. I: Beams
- On the virtual element method for three-dimensional linear elasticity problems on arbitrary polyhedral meshes
- On the stability analysis of hyperelastic boundary value problems using three- and two-field mixed finite element formulations
- A multi-scale residual-based anti-hourglass control for compatible staggered Lagrangian hydrodynamics
- Efficient virtual element formulations for compressible and incompressible finite deformations
- A finite element based on the strain approach using Airy's function
- High-order tetrahedral finite elements applied to large deformation analysis of functionally graded rubber-like materials
- Improved numerical integration for locking treatment in isogeometric structural elements. II: Plates and shells
- Selective and reduced numerical integrations for NURBS-based isogeometric analysis
- A new approach to quadrature for finite elements incorporating hourglass control as a special case
- On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications
- Mixed variational principles and stabilization of spurious modes in the 9-node element
- Nonlinear versions of flexurally superconvergent elements
- Development of a one-point quadrature shell element for nonlinear applications with contact and anisotropy.
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- An improved one-point integration method for large strain elastoplastic analysis
- Stabilization schemes for 12-node to 21-node brick elements based on orthogonal and consistently assumed stress modes
- The incremental flow formulation for the numerical analysis of 3-dimensional viscous deformation processes: Continuum formulation and computational aspects
- An improved reproducing kernel particle method for nearly incompressible finite elasticity
- An upwind cell centred total Lagrangian finite volume algorithm for nearly incompressible explicit fast solid dynamic applications
- A finite element formulation in boundary representation for the analysis of nonlinear problems in solid mechanics
- An isogeometric Reissner-Mindlin shell element based on Bézier dual basis functions: overcoming locking and improved coarse mesh accuracy
- A single Gauss point continuum finite element formulation for gradient-extended damage at large deformations
- Lagrange multiplier based vs micromorphic gradient-enhanced rate-(in)dependent crystal plasticity modelling and simulation
- Non-convolutional second-order complex-frequency-shifted perfectly matched layers for transient elastic wave propagation
- Leveraging spectral analysis to elucidate membrane locking and unlocking in isogeometric finite element formulations of the curved Euler-Bernoulli beam
- A new numerical integration over arbitrary quadrilateral element based on smoothed strain energy and Richardson extrapolation
- Treatment of near-incompressibility and volumetric locking in higher order material point methods
- A mixed FFT-Galerkin approach for incompressible or slightly compressible hyperelastic solids under finite deformation
- A nine nodes solid-shell finite element with enhanced pinching stress
- An efficient and rapid numerical quadrature to generate element matrices for quadrilateral and hexahedral elements in functionally graded materials (FGMs)
- Multiscale crystal defect dynamics: a coarse-grained lattice defect model based on crystal microstructure
- A finite element simulation scheme for biological muscular hydrostats
- Multiscale modeling of dislocation patterns and simulation of nanoscale plasticity in body-centered cubic (BCC) single crystals
- An updated-Lagrangian damage mechanics formulation for modeling the creeping flow and fracture of ice sheets
- Compatible-strain mixed finite element methods for 2D compressible nonlinear elasticity
- A low-order locking-free hybrid discontinuous Galerkin element formulation for large deformations
- On an equivalence between a discontinuous Galerkin method and reduced integration with hourglass stabilization for finite elasticity
- A low order virtual element formulation for finite elasto-plastic deformations
- Modeling of deformation of battery cells using thick shell element formulation
- A novel mixed finite element for finite anisotropic elasticity: the SKA-element simplified kinematics for anisotropy
- Finite elastic wrinkling deformations of incompressible fiber-reinforced plates
- Assumed strain stabilization of the eight node hexahedral element
- An upwind vertex centred finite volume solver for Lagrangian solid dynamics
- A finite volume method for incompressible linear elasticity
- Generalized modal element method. II: Application to eight-node asymmetric and symmetric solid-shell elements in linear analysis
- On a new finite element technology for electromagnetic metal forming processes
- Efficient isogeometric NURBS-based solid-shell elements: mixed formulation and \(\overline B\)-method
- On a physically stabilized one point finite element formulation for three-dimensional finite elasto-plasticity
- One point quadrature shell elements for sheet metal forming analysis
- A weighted collocation on the strong form with mixed radial basis approximations for incompressible linear elasticity
- Unified and mixed formulation of the 8-node hexahedral elements by assumed strain method
- On the control of pressure oscillation in bilinear-displacement constant-pressure element
- On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials
- \(\overline {\text B}\) and \(\overline {\text F}\) projection methods for nearly incompressible linear and nonlinear elasticity and plasticity using higher-order NURBS elements
- Hexahedral volume coordinate method (HVCM) and improvements on 3D Wilson hexahedral element
- Removing membrane locking in quadratic NURBS-based discretizations of linear plane Kirchhoff rods: CAS elements
- Reduced quadrature for finite element and isogeometric methods in nonlinear solids
- Improved XFEM (IXFEM): 3D dynamic crack propagation under impact loading
- High-performance modules for solving large-scale, strongly anisotropic elliptic problems with applications to aerospace composites
- Finite element modelling of the stamping of anisotropic sheet metals
- Solution of quasi-static, force-driven problems by means of a dynamic-explicit approach and an adaptive loading procedure
- Dynamic-explicit elastic plastic finite-element simulation of hemispherical punch-drawing of sheet metal
- Quadrilateral elements for the solution of elasto-plastic finite strain problems
- A finite element method based on C0-continuous assumed gradients
- Energy-momentum consistent algorithms for dynamic thermomechanical problems --- application to mortar domain decomposition problems
- An isogeometric locking-free NURBS-based solid-shell element for geometrically nonlinear analysis
- Hourglass stabilization and the virtual element method
- Discretization methods for solids undergoing finite deformations
- An approach to statical and quasi-statical nonlinear analysis of structures in small strains and finite rotations hypotheses
- Reliable second-order hexahedral elements for explicit methods in nonlinear solid dynamics
- Failures of the three-dimensional patch test for large elastic deformations
- A FORMULATION OF THE QS6 ELEMENT FOR LARGE ELASTIC DEFORMATIONS
This page was built for publication: Hourglass control in linear and nonlinear problems
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1056270)
