Direct numerical simulation of conical shock wave-turbulent boundary layer interaction
From MaRDI portal
Abstract: Direct numerical simulation of the Navier-Stokes equations is carried out to investigate the interaction of a conical shock wave with a turbulent boundary layer developing over a flat plate at free-stream Mach number and Reynolds number , based on the upstream boundary layer momentum thickness. The shock is generated by a circular cone with half opening angle . As found in experiments, the wall pressure exhibits a distinctive N-wave signature, with a sharp peak right past the precursor shock generated at the cone apex, followed by an extended zone with favourable pressure gradient, and terminated by the trailing shock associated with recompression in the wake of the cone. The boundary layer behavior is strongly affected by the imposed pressure gradient, with streaks which are locally suppressed in adverse pressure gradient (APG) zones, and which suddenly reform in the downstream region with favourable pressure gradient (FPG). Three-dimensional mean flow separation is only observed in the first APG region associated with formation of a horseshoe vortex, whereas the second APG region features an incipient detachment state, with scattered spots of instantaneous reversed flow. As found in canonical two-dimensional wedge-generated shock/boundary layer interactions, different amplification of the turbulent stress components is observed through the interacting shock system, with approach to isotropic state in APG regions, and to a two-component anisotropic state in FPG.
Recommendations
- Direct numerical simulation of transonic shock/boundary layer interaction under conditions of incipient separation
- Numerical studies of shock wave interactions with a supersonic turbulent boundary layer in compression corner:turning angle effects
- Numerical simulation of crossing-shock-wave/turbulent-boundary-layer interaction using a two-equation model of turbulence
- DNS of Shock/Boundary Layer Interaction Flow in a Supersonic Compression Ramp
- Reynolds‐stress modelling of M = 2.25 shock‐wave/turbulent boundary‐layer interaction
Cites work
- Assessment of inflow boundary conditions for compressible turbulent boundary layers
- Boundary conditions for direct simulations of compressible viscous flows
- Combined immersed-boundary finite-difference methods for three-dimensional complex flow simulations
- Computational Geometry in C
- Computational Modeling of Turbulent Flows
- Contribution to single-point closure Reynolds-stress modelling of inhomogeneous flow
- Direct numerical simulation of transonic shock/boundary layer interaction under conditions of incipient separation
- Direct numerical simulation of turbulence in a nominally zero-pressure-gradient flat-plate boundary layer
- Direct simulation of the turbulent boundary layer along a compression ramp at M = 3 and Reθ = 1685
- Flow physics and RANS modelling of oblique shock/turbulent boundary layer interaction
- Generalized conservative approximations of split convective derivative operators
- scientific article; zbMATH DE number 4083230 (Why is no real title available?)
- scientific article; zbMATH DE number 3066481 (Why is no real title available?)
- Low-order stochastic modelling of low-frequency motions in reflected shock-wave/boundary-layer interactions
- Mean-flow scaling of turbulent pipe flow
- Mechanisms for generating coherent packets of hairpin vortices in channel flow
- Numerical methods for high-speed flows
- On nonlinear K-l and K-ε models of turbulence
- On the suitability of the immersed boundary method for the simulation of high-Reynolds-number separated turbulent flows
- Robert Legendre and Henri Werlé: Toward the elucidation of three-dimensional separation
- Shock Wave-Boundary-Layer Interactions
- Some physical aspects of shock wave/boundary layer interactions
- Space and time organization in a shock-induced separated boundary layer
- Spalart-Allmaras
- Turbulence development in a non-equilibrium turbulent boundary layer with mild adverse pressure gradient
- Turbulence in supersonic boundary layers at moderate Reynolds number
Cited in
(13)- RANS-based numerical simulation of shock wave/turbulent boundary layer interaction induced by a blunted fin normal to a flat plate
- Conical flow breakdown in non-free shock-wave/boundary-layer interaction
- Direct numerical simulation of transonic shock/boundary layer interaction under conditions of incipient separation
- The wall pressure signature of transonic shock/boundary layer interaction
- Numerical Simulation of Acoustic Waves Interacting with a Shock Wave in a Quasi-ID Convergent-Divergent Nozzle Using an Unstructured Finite Volume Algorithm
- Numerical simulation of crossing-shock-wave/turbulent-boundary-layer interaction using a two-equation model of turbulence
- A spectral inspection for turbulence amplification in oblique shock wave/turbulent boundary layer interaction
- Converging near-elliptic shock waves
- Direct numerical simulation of canonical shock/turbulence interaction
- Post-shock turbulence recovery in oblique-shock/turbulent boundary layer interaction flows
- Dynamics of three-dimensional shock-wave/boundary-layer interactions
- Hybrid numerical method for wall-resolved large-eddy simulations of compressible wall-bounded turbulence
- Multi-GPU-accelerated decoding of the underlying interaction mechanism between the supersonic oblique shock wave and the turbulent boundary layer
This page was built for publication: Direct numerical simulation of conical shock wave-turbulent boundary layer interaction
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q5235591)
