Dislocation based fracture mechanics.
Bilby-Cottrell-Swinden-Dugdale crackcrack tipcrevassedikedislocationdisplacementfatigue crack propagationfracture mechanicsGriffith-Inglis crackHilbert transformsinfinitely long crackinterface crackisotropic elasto-plastic solidmode I crackmode II crackmode III crackmoving Yoffe crackMuskhelishvili equationsplastic zonestressunstable slippageZener-Stroch-Koehler crack
This book is notable in that it is the only one written that provides an account of the dislocation foundation of fracture mechanics and presents solutions for cracks in elasto-plastic solids. The books on fracture mechanics generally overlook the dislocation foundation of cracks, though those on dislocations report that the cracks can be modeled with dislocations. This book covers simultaneously the basic concepts of cracks and dislocations, and presents various solutions for cracks in elasto-plastic solids, but does not address the cracks in thermoelastic and/or piezoelectric, polar, nonlocal and alike solids. NEWLINENEWLINENEWLINEThe book contains 10 chapters with homework problems, 7 appendices and more than two hundred references mainly from the western literature. Chapter 1 is restricted to stress and displacement fields in Griffith-Inglis and Zener-Stroch-Koehler crack theories. Chapter 2 gives an adequate background for the application of dislocations to crack problems. Chapter 3 contains Hilbert transforms and Muskhelishvili equations which are needed for the crack solutions in elastic solids. Chapter 4 treats the Bilby-Cottrell-Swinden-Dugdale cracks in one-dimensional plastic zone at the crack tip by use of Muskhelishvili equations. Also, from these equations, the amounts of dislocation crack tip shielding or antishielding are obtained in chapter 5. The following three chapters present the dislocation-generated solutions for infinitely long cracks in isotropic elasto-plastic solids. Specifically, chapter 6 deals with solutions of the problem of formation of a plastic zone at a crack tip of mode III crack, chapter 7 with those at a crack tip of mode II crack, and chapter 8 with those at a crack tip of mode I crack. Chapter 9 considers the stress field of moving Yoffe cracks; here the last section discusses some interesting fracture applications such as crevasses and dikes, interface cracks, unstable slippage and fatigue crack propagation. In appendices, tables of Hilbert transforms, useful integrals for crack problems and useful equations are given, the stress fields of dislocations are recorded, and the dislocations in stress space are reported. NEWLINENEWLINENEWLINEEvidently, the book is a valuable contribution in the field of fracture mechanics, its presentation is clear enough to be accessible to graduate students, and it is highly recommended to researchers and practicing engineers.
- An analysis of the Volterra problem for the steady state creep material using complex stress and pseudo-stress functions
- Discrete dislocation simulations of the development of a continuum plastic zone ahead of a stationary mode III crack
- Micromechanics of dislocations in solids: \(\mathbf J-, M\)-, and \(\mathbf L\)-integrals and their fundamental relations
- Self-energy of dislocations and dislocation pileups
- Continuum dislocation theory accounting for redundant dislocations and Taylor hardening
- Two bonded multiferroic ceramics half-planes with coupled interfacial imperfections: in-plane fracture and its dislocation-based physical mechanisms
- In-plane fracture analysis on the magneto-electro-elastic interfacial region in a multiferroic composite: effects of volume fraction
- Analytic solutions of multiple moving cracks in an orthotropic layer bonded to an orthotropic FGM coating
- Fracture and singularities of the mass-density gradient field
- Dislocation core spreading at interfaces between metal films and amorphous substrates.
- Elastic fields due to an edge dislocation in an isotropic film-substrate by the image method
- Several embedded cracks in a functionally graded piezoelectric strip under dynamic loading
- Three-dimensional nonlocal anisotropic elasticity: a generalized continuum theory of Ångström-mechanics
- Identification of crack parameters and stress intensity factors in finite and semi-infinite plates solving inverse problems of linear elasticity
- Thermodynamic dislocation theory for non-uniform plastic deformations
- Dislocation impediment by the grain boundaries in polycrystals
- Anti-plane impact of a composite wedge with radial cracks
- Analysis of a model of field crack mechanics for brittle materials
- On the plastic zone size and crack tip opening displacement of a Dugdale crack interacting with a circular inclusion
- Magneto-electro-elastic analysis of a strip containing multiple embedded and edge cracks under transient loading
- Compensation of stress intensity factors in hollow cylinders containing several cracks under torsion by electro-elastic coating
- Stress investigation on a cracked craze interacting with a nearby circular inclusion in polymer composites
- Anti-plane stress analysis of orthotropic rectangular planes weakened by multiple defects
- Anti-plane analysis of an orthotropic strip weakened by several moving cracks
- Bimaterial interface fracture: a discrete dislocation model
- Dislocation technique to obtain the dynamic stress intensity factors for multiple cracks in a half-plane under impact load
- Dynamic fracture analysis in an orthotropic half-plane with FGM coating containing several moving cracks
- Effects of lattice incompatibility-induced hardening on the fracture behavior of ductile single crystals
- A semi-infinite edge dislocation model for the proportionality limit stress of metals under high strain rate
- Dislocation-based fracture analysis of functionally graded magnetoelectroelastic solids
- Thermo-elastic dislocation with application to crack problems
- A dislocation-based solution for stress introduced by arbitrary volume expansion in cylinders
- Crack interaction with nanoscale twinning near a second-phase particle in fine-grained magnesium alloy
- Single crystal plasticity with bend-twist modes
- Creep and recrystallization of large polycrystalline masses. III. Continuum theory of ice sheets
- Creep and recrystallization of large polycrystalline masses. II. Constitutive theory for crystalline media with transversely isotropic grains
- Influence of a Thin Film on a Screw Dislocation in a Substrate with Viscoelastic Interface
- A fracture criterion for finitely deforming crystalline solids -- the dynamic fracture of single crystals
- On dislocation models of grain boundaries
- The shielding effects of the crack-tip plastic zone
- Interaction between cracks and a circular inclusion in a finite plate with the distributed dislocation method
- An isolated cohesive crack in tension
- A dislocation density-based single crystal constitutive equation
- Plastic size effect analysis of lamellar composites using a discrete dislocation plasticity approach
- Dislocation shielding of a cohesive crack
- Archetype-blending continuum theory
- Interfacial Wedge Disclination Dipole in a Hexagonal Bicrystal with Arbitrary In-Plane c-Axis Orientations
- Transient response of cracked nonhomogeneous substrate with piezoelectric coating by dislocation method
- Exact solutions for a wedge disclination dipole in a transversely isotropic bimaterial
- Screw dislocation interacting with interfacial and interface cracks in piezoelectric bimaterials
- Stress analysis on a Zener crack nucleation from an eccentric wedge disclination in a cylinder
- Solutions for Edge Dislocation in Anisotropic Film–substrate System by the Image Method
- The effect of surface free energy on the fracture behaviors of nanoparticle-reinforced composites
- Why the stress trajectories in the Dean-Hutchinson plastic sector of the growing mode III crack are an unfocused fan
- The stress intensity factor of an edge dislocation near an elliptically blunted crack tip
- Two-dimensional radial integration displacement discontinuity method with high-order isoparametric elements
- Crack tip opening displacement of a dugdale crack in a three-phase cylindrical model composite material
- On the plastic zone size and CTOD study for a Zener-Stroh crack interacting with a circular inclusion
- Multiple moving cracks in a functionally graded strip
- Analytical solution of multiple moving cracks in functionally graded piezoelectric strip
- Dynamic dislocations solution to elastoplastic moving cracks
- Anti-plane elastodynamic analysis of planes with multiple defects
- A field theory of distortion incompatibility for coupled fracture and plasticity
- The screw dislocation in a three-quarter plane
- Energies and distributions of dislocations in stacked pile-ups
This page was built for publication: Dislocation based fracture mechanics.
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2718637)
