Finite element method. Vol. 2: Solid mechanics.
boundary value problemdiscretizationerror estimationfinite element methodGalerkin methodKirchhoff theorylarge deformationsMindlin theorynonlinear elasticityplasticityplateReissner theoryshellsmall deformationsstabilitystrainstressviscoelasticityviscoplasticity
Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs (65N30) Research exposition (monographs, survey articles) pertaining to mechanics of deformable solids (74-02) Plates (74K20) Shells (74K25) Finite element methods applied to problems in solid mechanics (74S05) Research exposition (monographs, survey articles) pertaining to fluid mechanics (76-02)
The second volume deals with problems of solid mechanics that are of practical importance and continue to be of research interest. As in the first volume [see the foregoing entry], the discussion of each problem begins with theoretical explanations of the model and with the corresponding boundary value problem. So the book is self-contained in a certain sense. Moreover, it is independent of the first volume in the sense that the reader having some, not too much, knowledge of FEM can read it and use it for practical purposes. NEWLINENEWLINENEWLINEThe second volume examines two classes of nonlinear solid mechanics problems: (1) problems of elasticity, viscoelacticity, plasticity, and viscoplasticity, and (2) the theory of plates and shells. The nonlinear problems are considered in two cases: small deformations (chapters 1-3), and large deformations (chapters 10-12). Chapters 4-9 deal with the plate-shell theory. The authors demonstrate how to construct and implement a workable version of FEM for each particular problem. The book discusses not only numerical implementation, but also mechanical results obtained on the basis of proposed methods. In this way such important problems as stability and instability are discussed on a good level. The FEM for plates and shells remains of research interest even for linear problems, since here it is unclear which version of FEM is preferable or which criterion for best approximation should be used. The volume discusses various types of elements implemented in this theory, and compares them. NEWLINENEWLINENEWLINEThe book is strongly recommended to postgraduate students in mechanical and structural engineering, as well as to engineers and researchers in nonlinear solid mechanics and in the shell theory.
- Combined finite volume element method for singularly perturbed reaction-diffusion problems
- Vibration analysis of plane elasticity problems by the \(C^0\)-continuous time stepping finite element method
- A rotation-free thin shell quadrilateral
- Axisymmetric pressure boundary loading for finite deformation analysis using p-FEM
- Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading
- A phenomenological three-dimensional rate-independent continuum damage model for highly filled polymers: Formulation and computational aspects
- Transfer operators for evolving meshes in small strain elasto-plasticity
- A new frictional time integration algorithm for large slip multi-body frictional contact problems
- Finite element analysis of convection dominated reaction--diffusion problems.
- \(p\)-FEM applied to finite isotropic hyperelastic bodies.
- An enhanced finite volume method to model 2D linear elastic structures
- Generalized mixed finite element method for 3D elasticity problems
- Functional parallel factor analysis for functions of one- and two-dimensional arguments
- Applying the explicit time central difference method for numerical simulation of the dynamic behavior of elastoplastic flexible reinforced plates
- A new accurate and efficient iterative numerical method for solving the scalar and vector nonlinear equations: approach based on geometric considerations
- Geometrically nonlinear elastodynamic analysis of hyper-elastic neo-Hooken FG cylinder subjected to shock loading using MLPG method
- FEM-SGBEM coupling for modeling of mode-I planar cracks in three-dimensional elastic media with residual surface tension effects
- The influence of geometric imperfections in cardiovascular FSI simulations
- High-order spectral finite elements in analysis of collinear wave mixing
- A matrix free, partitioned solution of fluid-structure interaction problems using finite volume and finite element methods
- Accurate gradient computations at interfaces using finite element methods
- Enhanced calculation of eigen-stress field and elastic energy in atomistic interdiffusion of alloys
- A coupled electro-thermal discontinuous Galerkin method
- Arbitrary order 2D virtual elements for polygonal meshes: I: Elastic problem
- Isogeometric analysis on implicit domains using weighted extended PHT-splines
- Enhanced meshfree method with new correlation functions for functionally graded plates using a refined inverse sin shear deformation plate theory
- Refined meshless local strong form solution of Cauchy-Navier equation on an irregular domain
- Control of crack formation in rock in using nonexplosive braking compositions
- The absolute coordinate formulation with elasto-plastic deformations
- Introduction to the web-method and its applications
- A computational model of the topographic distribution of ventilation in healthy human lungs
- GPGPU-based parallel computing applied in the FEM using the conjugate gradient algorithm: a review
- A new method applied to the quadrilateral membrane element with vertex rigid rotational freedom
- High-order linear and non-linear residual distribution schemes for turbulent compressible flows
- Robust topology optimization of structures with imperfect geometry based on geometric nonlinear analysis
- Complex Fourier element shape functions for analysis of 2D static and transient dynamic problems using dual reciprocity boundary element method
- Finite element simulation of thermoforming processes for polymer sheets
- Numerically generated tangent stiffness matrices for nonlinear structural analysis.
- Finite element methods (part 2), numerical methods for solids (part 2)
- Natural frequency analysis of 2D-FGM thick hollow cylinder based on three-dimensional elasticity equations
- Adaptive isogeometric analysis for plate vibrations: an efficient approach of local refinement based on hierarchical a posteriori error estimation
- Finite element procedure and simulations for a multiphase phase field approach to martensitic phase transformations at large strains and with interfacial stresses
- Block preconditioning for fault/fracture mechanics saddle-point problems
- Corotational cut finite element method for real-time surgical simulation: application to needle insertion simulation
- An efficient zigzag theory based finite element modeling of composite and sandwich plates with multiple delaminations using a hybrid continuity method
- A quadrilateral \(\operatorname{G}^1\)-conforming finite element for the Kirchhoff plate model
- Rotation-free Bernstein-Bézier elements for thin plates and shells -- development and validation
- Very high order discontinuous Galerkin method in elliptic problems
- A single Gauss point continuum finite element formulation for gradient-extended damage at large deformations
- An implicit \(\operatorname{G}^1\)-conforming bi-cubic interpolation for the analysis of smooth and folded Kirchhoff-Love shell assemblies
- A weakly compressible hybridizable discontinuous Galerkin formulation for fluid-structure interaction problems
- Material point method simulations using an approximate full mass matrix inverse
- A high order cell-based smoothed finite element method using triangular and quadrilateral elements
- An efficient automatic adaptive algorithm for cohesive crack propagation modeling of concrete structures using matrix-free unstructured Galerkin finite volume method
- A meshless solution of the compressible viscous flow in axisymmetric tubes with varying cross-sections
- Partitioned path-following strategy for nonlinear structural analyses using the boundary element method
- An accurate, robust, and efficient finite element framework with applications to anisotropic, nearly and fully incompressible elasticity
- A reverse augmented constraint preconditioner for Lagrange multiplier methods in contact mechanics
- Non uniform weighted extended B-spline finite element analysis of non linear elliptic partial differential equations
- \(C^1\)-conforming variational discretization of the biharmonic wave equation
- A scaled boundary finite element formulation for solving plane-strain viscoelastic problems
- Two new triangular \(\operatorname{G}^1\)-conforming finite elements with cubic edge rotation for the analysis of Kirchhoff plates
- A smoothed finite element method for octree-based polyhedral meshes with large number of hanging nodes and irregular elements
- Hybrid FEM and peridynamic simulation of hydraulic fracture propagation in saturated porous media
- Fingerprint formation
- Nanoscale multiphase phase field approach for stress- and temperature-induced martensitic phase transformations with interfacial stresses at finite strains
- Robust design optimization of car-door structures with spatially varied material uncertainties
- Modeling the elasto-visco-plastic bending of spatially reinforced plates accounting for the strain-rate sensitivity of composition components
- Construction of peridynamic beam and shell models on the basis of the micro-beam bond obtained via interpolation method
- General finite-element framework of the virtual fields method in nonlinear elasticity
- Asymptotically analytical solution of elastic stress for convex polygonal holes in an infinite plane under various loading conditions
- A high-order generalized finite element method for multiscale structural dynamics and wave propagation
- A Taylor-Hood type virtual element formulations for large incompressible strains
- Coupled solid-fluid response of deep tunnels excavated in saturated rock masses with a time-dependent plastic behaviour
- Heritage and early history of the boundary element method
- A smart displacement based (SDB) beam element with distributed plasticity
- Spatial ANCF/CRBF beam elements
- Accurate bending analysis of rectangular thin plates with corner supports by a unified finite integral transform method
- Wave motion analysis and modeling of membrane structures using the wavelet finite element method
- A nodal integration axisymmetric thin shell model using linear interpolation
- A generalized probabilistic edge-based smoothed finite element method for elastostatic analysis of Reissner-Mindlin plates
- A coupled multiphysics FEM model to investigate electromagnetic, thermal and mechanical effects in complex assemblies: the design of the high-luminosity large hadron collider beam screen
- Variational modeling and finite-element simulation of functional fatigue in polycrystalline shape memory alloys
- An accurate and efficient scheme for acoustic-structure interaction problems based on unstructured mesh
- Fracture of solar-grade anisotropic polycrystalline silicon: a combined phase field-cohesive zone model approach
- An efficient and accurate method for modeling nonlinear fractional viscoelastic biomaterials
- New material point method contact algorithms for improved accuracy, large-deformation problems, and proper null-space filtering
- Extended multiscale FEM for design of beams and frames with complex topology
- From diffuse damage to strain localization from an eikonal non-local (ENL) continuum damage model with evolving internal length
- Novel quadtree algorithm for adaptive analysis based on cell-based smoothed finite element method
- Algorithmic aspects and finite element solutions for advanced phase field approach to martensitic phase transformation under large strains
- A new subregion mesh method for the investigation of the elastic-plastic impact in flexible multibody systems
- Gradient-enriched finite element methodology for axisymmetric problems
- Fluid-structure interaction of single flexible cylinder in axial flow
- Non-linear numerical analysis of a double-threaded titanium alloy dental implant by FEM
- Development of an object-oriented finite element program with adaptive mesh refinement for multi-physics applications
- A stabilized and coupled meshfree/meshbased method for the incompressible Navier-Stokes equations. II: Coupling
- Modeling dynamics of cell population molecule expression distribution
- On temperature rate terms for viscoplastic constitutive models with applications to high temperature materials
- Nonuniform web-splines
This page was built for publication: Finite element method. Vol. 2: Solid mechanics.
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2710272)
