No label defined (Q3328922)

From MaRDI portal

!

This is the item page for this Wikibase entity, intended for internal use and editing purposes. Please use the normal view instead:

scientific article; zbMATH DE number 3860611
Language Label Description Also known as
default for all languages
No label defined
    English
    No label defined
    scientific article; zbMATH DE number 3860611

      Statements

      1980
      0 references
      numerical modeling
      0 references
      rock behavior
      0 references
      post-failure behavior
      0 references
      direct shear test
      0 references
      three dimensional finite element analysis
      0 references
      stratified rocks
      0 references
      Nonlinear analysis
      0 references
      joint and weak intercalation in rock
      0 references
      plastic and brittle behavior
      0 references
      strain softening
      0 references
      size effects
      0 references
      progressive failure
      0 references
      layered rock mass
      0 references
      [This collection of articles was published as chapter 4 in the book announced in this Zbl 0481.00020.] This chapter is devoted to numerical modeling of rock behavior. Included are papers dealing with constitutive equations, numerical procedures, and applications to practical problems. 1. \textit{H. Cramer, W. Wunderlich, H. K. Kutter} and \textit{W. Rahn}: Finite element analysis of stress distribution, induced fracture and post- failure behavior along a shear zone in rock. - This paper describes finite element modeling of the direct shear test of rock joints. Three different models are discussed, a discrete joint, a continuum with equally distributed parallel discontinuities, and a homogeneous intact rock with equally distributed and randomly oriented (ubiquitous) discontinuities. All models employ piecewise linear functions describing normal and shear stresses, as well as dilatation. Zero tensile strength is assumed for the discrete joint. Otherwise, the normal tensile stress is linear up to a limit and then drops to zero. Mohr-Coulomb failure criteria are used for the peak and residual strength. The shear test is modeled with plane-strain eight-node isoparametric elements for both the steel boxes and rock. The numerical solution is obtained by iterations based on the initial stress method performed after each load increment. Results of the three material models are compared with experimental data and the numerical simulation is evaluated with respect to prediction of strain softening, stress distribution along the shear zone, and second order fracture. 2. \textit{J. Dubois} and \textit{D. W. Obenauer}: Efficient three dimensional finite element analysis of stratified rocks. - Problems with two- dimensional geometries are treated. Two topics are considered, finite- element models and material models. The finite element modeling is based on separation of variables. All quantities are expressed in terms of symmetric and antisymmetric functions. Shape functions are used for the in-plane directions, and Fourier series in the third direction and for displacements. Two simple cases demonstrate the modeling scheme, and results are compared with analytical solutions. The plasticity model is based on coupled damage-modes theory, where the rate of damage for each individual mode is proportional to the plastic flow. Yield surfaces and flow rules are defined for the rock matrix and the (ubiquitous) joints. Several examples are used to compare the numerical solutions with experimental data. 3. \textit{Hsu-jun Ke}: Nonlinear analysis of the mechanical properties of joint and weak intercalation in rock. - This paper describes a computational model for weak planes in rock. Joint elements are assumed to be elasto-plastic. Piecewise linear relations are specified for the shear and normal stress curves. Coulomb's theory is adopted for the shear-normal stress envelope for the elastic limit, peak stress (followed by a sudden drop), and for the residual stress. An associated flow rule is employed for joint elements, with the residual strength serving as a yielding criterion. Shear stiffnesses are expressed as a power of the normal stress. The identification of the state of an element during the computational process is described. Numerical examples include a finite element solution of an in-situ direct shear test, stresses in and stability of rock slopes, and derivation of shear-normal stress curves for a wave like weak plane. 4. \textit{K. Kovári}: Models for the interpretation of plastic and brittle behavior of rocks. - This paper describes analog mechanical models which simulate the behavior of some real and idealized materials. These models are aimed towards obtaining stress-strain curves such as those obtained experimentally for plastic and brittle rocks. The fundamental elements in these models are simple components, such as, elastic springs, slip elements, and wedge friction elements. The components are coupled in various forms. Spatial distribution of the basic components results in characteristic stress-strain curves that can be scaled according to empirical data. Complex behavior is obtained, including hysteresis loops, the Bauschinger effect, and variable elastic modulus. The models presented here extend the ideas of Jenkin, Prandtl, Maxwell, and others, and provide tools for illustrating the complex behavior of geological materials. It seems, though, that the models may be more useful for numerical computations, a matter which deserves further studies. 5. \textit{W. G. Pariseau}: A finite element approach to strain softening and size effects in rock mechanics. - Modeling of strain softening and size effects in unconfined uniaxial compression tests is treated. A flow- free perfectly plastic-brittle material has been chosen, which qualitatively agrees with experiments. Two different failure criteria are employed, a linear and a quadratic. Following initial failure, a drastic reduction in the elastic modulus leads to strain softening. Softened elements are assumed to spall. Attention is focused on the effects of an initially non-uniform distribution of stresses. Comments regarding more realistic modeling are also included. 6. \textit{G. N. Pande}: Numerical modelling of rocks - Possibilities and problems. - This paper provides a brief review of numerical models for rocks. Emphasis is put on application of such models to practical problems. Constitutive laws for the rock mass and joints are summarized. Simplifying assumptions, such as using two-dimensional models are discussed. A special case dealing with a cavity near a toe of a hill slope is used to illustrate the finite element solution, and to indicate the primary difficulties associated with the numerical models. 7. \textit{Szu-Ching Wang} and \textit{Jun Liu}: A finite element simulation on the failure of brittle rocks. - The numerical modeling of brittle rock is considered by using piecewise linear (elasto-plastic) stress strain relationships. Modified Griffith criteria are used for predicting crack initiation. The numerical procedure is based on incremental loading. An example dealing with uniaxial loading of a specimen with random distribution of microcracks demonstrates the model. 8. \textit{Zhita Yang} and \textit{Zhuhua Liu}: Preliminary analysis for progressive failure of layered rock mass. - This paper demonstrates, by using two examples of cavities within a rock mass, the importance of progressive failure analysis. It is shown that simplifying assumptions which do not account for variable ''ilure criterialure'', i.e., which do not employ the residual failure criteria, but rather use the initial failure criteria, might lead to unsafe solutions. A general discussion on modeling is also included.
      0 references

      Identifiers

      0 references
      0 references
      0 references
      0 references
      0 references
      0 references
      0 references