No label defined (Q4720074)

From MaRDI portal

!

This is the item page for this Wikibase entity, intended for internal use and editing purposes. Please use the normal view instead:

scientific article; zbMATH DE number 1385546
Language Label Description Also known as
default for all languages
No label defined
    English
    No label defined
    scientific article; zbMATH DE number 1385546

      Statements

      9 January 2000
      0 references
      Leeds (GB)
      0 references
      Symposium
      0 references
      Proceedings
      0 references
      Elastohydrodynamics
      0 references
      Lubrication
      0 references
      Traction
      0 references
      line contacts
      0 references
      micro-cavitation
      0 references
      surface asperities
      0 references
      lubricated soft contacts
      0 references
      large surface deformations
      0 references
      non-Newtonian fluids
      0 references
      bio-tribology
      0 references
      metal forming
      0 references
      multigrid methods
      0 references
      gas-lubricated bearings
      0 references
      finite element method
      0 references
      fatigue fracture
      0 references
      waviness effect
      0 references
      The book presents proceedings of the title symposium and consists of 16 sessions and many parallel ones. Session I ``Keynote address'' contains the the paper by \textit{E. Ioannides} ``EHL (elastohydrodynamic lubrication) in rolling element bearings, recent advances and wider implications'', in which the author discusses the lubrication of real surfaces with roughness or damage from solid contaminants, together with frictional losses. The implications of treating a rolling element bearing as a full dynamic system are considered, and the need for further research is identified. Session II ``Analytical/numerical studies (1)'' begins by \textit{A. A. Lubrecht}'s paper ``Influence of local and global features in EHL contacts'', regrouping some of the recent developments in the understanding of the EHL of non-smooth surfaces, due to the extent of the non-smoothness (local versus global). The \textit{C. D. Elcoati}'s with co-authors paper ``Fully coupled elastohydrodynamic solution techniques for the analysis of real rough line contacts using finite element and finite difference models'' describes two computational models for the analysis of real roughness in line contact EHL problems, assuming non-Newtonian lubricant behaviour. The methods are shown to be extremely robust, with numerical convergence irrespective of the initial conditions. The article by \textit{T. H. Kim} and \textit{A. V. Olver} ``Fatigue and brittle fracture analysis of surface engineering materials in rolling contact'' presents an analysis of the failure by fatigue and by brittle fracture of M 50 steel tool surfaces subject to rolling sliding contact. The last in this session paper by \textit{J. E. Rycroft} with co-authors demonstrates the importance of elastohydrodynamic effects in the lubrication of piston rings in modern gasolene and diesel engines. The experimental session III (1) is opened by the \textit{A. Y. Moore}'s article ``Nanometer EHL''. A cycle of 4 articles in session IV is devoted to analytical numerical methods. In the article by \textit{C. H. Venner} with co-authors the problem of surface waviness in EHL is considered as a first step towards the understanding of lubrication of rough surfaces. Here the authors investigate the deformation of sinusoidal waviness in the contact surface, more precisely -- the amplitude reduction of one-sided waviness in a transient EHL line contact. The next article by \textit{Sh. Kamamoto} and co-authors ``Effect of micro-cavitation on oil film thickness and pressure distributions in micro-EHL line contact'' takes into account the micro-cavitation caused by surface asperities, and gives on the basis of Newton-Raphson method a criterion for micro-cavity formation. \textit{E. Nurgata} and \textit{M. Berzins} in the article ``New relaxation scheme for solving EHL problems'' suggest an alternative approach to the distributive relaxation scheme of \textit{C. H. Venner} [Journal of Tribology 116, 741-750 (1994)]. This session is concluded by the article by \textit{M. Y. Panovko} ``Numerical simulation of the spatial elastohydrodynamic contact taking into account the complicated geometry of the inlet boundary of lubricant film as well as the single surface irregularities''. Session V (2) is experimental again. Session VI ``Soft EHL'' contains 4 articles on lubricated soft contacts with large surface deformations as compared to the thickness of the fluid film separating the bodies. Sessions VII ``Lubricant properties'' contains the paper by \textit{S. Bair} and \textit{W. O. Winer} ``A simple formula for EHD film thickness for non-Newtonian liquids'', where a recently developed numerical scheme for incompressible isothermal line contact is used in a simplified rheological model to obtain a formula for film thickness correction for non-Newtonian fluids using the minimal number of parameters. Other articles are experimental. Sessions VIII ``Transmissions (1) -- Gears'' and XV ``Transmissions (2) -- C.V.T.'' contain engineering articles except for the paper by \textit{M. Taniguchi} and co-authors ``The effect of spin motion upon elastohydrodynamic elliptic contacts'', where isothermal elliptic EHL problems have been solved numerically with different spin angular velocities incorporated into the rolling motion, for a Newtonian lubricant, assuming smooth surfaces of the contacting bodies. A computation program is presented. Session IX ``Analytical/numerical studies (3)'' consists of 4 articles: \textit{J. A. Greenwood} and \textit{G. E. Morales-Espejel} ``The amplitude of the complementary function for wavy EHL contacts''; \textit{P. Ehret} and co-authors ``Time-dependent solutions with waviness and asperities in EHL point contacts'' (multigrid methods are used); \textit{S. Bogdanski} ``Finite element modelling of surface fatigue crack in EHD contact'', and \textit{M-T. Ma} and \textit{Sh.Wang} ``Thermal and non-Newtonian effects on traction in an elliptic EHD contact under high loads and sliding speeds'' (a computer model is suggested). Session X ``Bio-tribology'' contains articles of engeneering character. Session XI ``Rolling element bearings'' contains engineering articles except two articles connected with theoretical mechanics and vibration theory: The article by \textit{P. M. B. Cann} and co-authors ``Track depletion and replenishment in a grease lubricated point contact: A quantitative analysis'' devoted to the prediction of grease film thickness in rolling element bearings, and the paper by \textit{J. W. Wijant} and \textit{C. H. Venner} ``Analysis of an EHL circular contact incorporating rolling element vibration''. Sessions XII ``Boundary lubrication'', and XIV ``Metal forming'' also have engineering character. The articles of session XIII ``Friction, traction and wear'' use multigrid methods. These are the papers by \textit{E. Hoglund} and \textit{R. Larsson} ``Modelling non-steady EHL with focus of lubricant density'', and by \textit{R. H. M. van der Stegen} and \textit{H. Moes} ``Efficient numerical method for various geometries of gas-lubricated bearings''. The latter discusses the development of numerical solver for Reynolds equation for aerodynamic lubricated bearnings, utilizing a finite elements method with multigrid. The last session XVI ``Plane bearings'' starts with the article by \textit{H. H. Priebch} and \textit{J. Krasser} ``Simulation of the oil film behaviour in elastic engine bearings considering pressure- and temperature dependent oil viscosity'', in which the authors develop a comprehensive thermo-elastohydrodynamic calculation method and implement it into a computer code. The results presented show quantitative effects of pressure- and temperature-dependent oil viscosity and density on both the oil film thickness and oil film pressure. The paper by \textit{E. G. Olson} and \textit{J. F. Booker}, ``Hydrodynamic analysis of journal bearings with structural inertia and elasticity by a model finite element method'' presents an elastohydrodynamic model for the coupled problem of a hydrodynamic lubricating fluid and an elastic structure with structural inertia. The problem in formulated, and the governing equations are solved by finite element method for a realistic journal bearing subject to dynamical loading. Finally, the paper by \textit{H. B. Rasheed} ``The elastohydrodynamic lubrication of heavily loaded journal bearing having non-cylindrical axial geometry'' gives an elastohydrodynamic analysis of bearing having non-cylindrical geometrical configuration in the axial direction with concave, convex and wedge-shaped surfaces.
      0 references

      Identifiers

      0 references
      0 references
      0 references
      0 references
      0 references
      0 references