Nonlinear thin shell analysis using a curved triangular element
From MaRDI portal
A triangular element for nonlinear shallow shells is developed. The paper takes as the point of departure the triangular facet element but applies corrections to it to take account of the curvature of the element. The resulting element is more robust for problems in which the dominant form of deformation is inextensional bending. An alternative procedure for including finite rotations is introduced. This procedure entails the definition of reference vectors which are attached to each element side; these are updated by proper orthogonal transformations which are in turn determined by orientations of the associated element sides. The changes in curvature are given explicitly and so the contribution to the geometric stiffness matrix can be determined in a straightforward way. The element is applied to problems in time-independent elastoplasticity. For this purpose it is found necessary to use a layered shell model, and Besseling's fraction model is adopted for each layer. The range of numerical examples given demonstrate that the element works well in practice, and, in particular, that it models both finite rotations and elastoplastic deformations well.
Recommendations
- Nonlinear analysis of general shell structures by flat triangular shell element
- Modélisation élastoplastique des coques minces par un élément courbe à variables nodales globales
- scientific article; zbMATH DE number 1405772
- On the choice of the linear element for corotational triangular shells
- A non-linear triangular curved shell element
Cites work
- A consistent co-rotational formulation for shells using the constant stress/constant moment triangle
- A displacement‐based geometrically non‐linear constant stress element
- Adaptive analysis of thin shells using facet elements
- An excursion into large rotations
- Consistent tangent operators for rate-independent elastoplasticity
- Explicit algorithms for the nonlinear dynamics of shells
- Finite element method. Vol. 1: The basis.
- Geometrically non‐linear constant moment triangle which passes the von Kármán patch test
- scientific article; zbMATH DE number 3121418 (Why is no real title available?)
- scientific article; zbMATH DE number 3138044 (Why is no real title available?)
- scientific article; zbMATH DE number 3911868 (Why is no real title available?)
- scientific article; zbMATH DE number 3179314 (Why is no real title available?)
- scientific article; zbMATH DE number 3718659 (Why is no real title available?)
- scientific article; zbMATH DE number 3731515 (Why is no real title available?)
- scientific article; zbMATH DE number 3757839 (Why is no real title available?)
- scientific article; zbMATH DE number 47868 (Why is no real title available?)
- scientific article; zbMATH DE number 3483672 (Why is no real title available?)
- scientific article; zbMATH DE number 637044 (Why is no real title available?)
- scientific article; zbMATH DE number 3338422 (Why is no real title available?)
- Nonlinear thin shell analysis using a curved triangular element
- Numerical integration strategy for plates and shells
- On a stress resultant geometrically exact shell model. III: Computational aspects of the nonlinear theory
- On the use of deep, shallow or flat shell finite elements for the analysis of thin shell structures
- Stability of straight bars subjected to repeated impulsive compression.
- Studies in anisotropic plasticity with reference to the Hill criterion
- THE THIN-WALLED CIRCULAR CYLINDER SUBJECTED TO CONCENTRATED RADIAL LOADS
- The zero-normal-stress condition in plane-stress and shell elastoplasticity
Cited in
(54)- Phenomenological invariant-based finite-element model for geometrically nonlinear analysis of thin shells
- A modified corotational framework for triangular shell elements
- The role of bending in the finite element analysis of thin shells
- Nonlinear thin shell analysis using a curved triangular element
- The treatment of shell normals in finite element analysis
- A geometrically nonlinear curved shell element with constant stress resultants
- A triangular finite shell element based on a fully nonlinear shell formulation
- A triangular shell element for geometrically nonlinear analysis
- New assumed strain triangles for nonlinear shell analysis
- A practicable and locking-free laminated shallow shell triangular element of varying and adaptable curvature
- A quadratic assumed natural strain curved triangular shell element
- On the choice of the linear element for corotational triangular shells
- A simple triangular finite element for nonlinear thin shells: statics, dynamics and anisotropy
- Phenomenological invariants and their application to geometrically nonlinear formulation of triangular finite elements of shear deformable shells
- Linear and geometrically nonlinear analysis of plates and shells by a new refined non-conforming triangular plate/shell element
- Optimization of geometrically nonlinear structures based on a multi-point approximation method and adaptivity
- Large-strain elasto-plastic shell analysis using low-order elements
- A large-strain elasto-plastic shell formulation using the Morley triangle
- A natural numerical differential geometry scheme for a doubly curved shell element
- scientific article; zbMATH DE number 3845199 (Why is no real title available?)
- Nonlinear finite element analysis based on macro triangular partition shell element
- The geometric stiffness of thick shell triangular finite elements for large rotations
- Corotational nonlinear analysis of thin plates and shells using a new shell element
- A rotation-free shell triangle for the analysis of kinked and branching shells
- Applications of a rotation-free triangular element for finite strain analysis of thin shells and membranes
- Explicit formulation of two anisotropic, triangular, thin, shallow shell elements
- Nonlinear analysis of general shell structures by flat triangular shell element
- Patch test verification of a triangular thin-shell element based on discrete Kirchhoff theory
- A degenerate triangular shell element with constant cross-sectional warping
- Accurate rigid-body modes representation for a nonlinear curved thin-shell element
- scientific article; zbMATH DE number 4089071 (Why is no real title available?)
- A curved axisymmetric shell element for nonlinear dynamic elastoplastic problems—II. Implementation and results
- Modélisation élastoplastique des coques minces par un élément courbe à variables nodales globales
- Analyse non linéaire de coques minces élastoplastiques avec l’élément DKT12
- scientific article; zbMATH DE number 1213965 (Why is no real title available?)
- An energy‐conserving co‐rotational procedure for the dynamics of shell structures
- PADÉ APPROXIMANTS APPLIED TO A NON-LINEAR FINITE ELEMENT SOLUTION STRATEGY
- scientific article; zbMATH DE number 1036635 (Why is no real title available?)
- scientific article; zbMATH DE number 1067186 (Why is no real title available?)
- A refined non-linear non-conforming triangular plate/shell element
- Curved quadratic triangular degenerated- and solid-shell elements for geometric non-linear analysis
- scientific article; zbMATH DE number 1487147 (Why is no real title available?)
- Rotation-free triangular plate and shell elements
- A non-linear triangular curved shell element
- A corotational flat triangular element for large strain analysis of thin shells with application to soft biological tissues
- scientific article; zbMATH DE number 1405772 (Why is no real title available?)
- Development of Invariant-Based Triangular Element for Nonlinear Thermoelastic Analysis of Laminated Shells
- Meshless implementation of the geometrically exact Kirchhoff-Love shell theory
- Explicit thickness integration for three‐dimensional shell elements applied to non‐linear analysis
- A displacement‐based geometrically non‐linear constant stress element
- An interface finite element for the simulation of localized membrane-bending deformation in shells
- A fully nonlinear multi-parameter shell model with thickness variation and a triangular shell finite element
- Geometrically nonlinear analysis of shell structures using a flat triangular shell finite element
- Rotation-free finite element for the nonlinear analysis of beams and axisymmetric shells
This page was built for publication: Nonlinear thin shell analysis using a curved triangular element
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1209975)
