OpenFOAM

swMATH4317MaRDI QIDQ16496FDOQ16496

Author name not available (Why is that?)

Official website: https://www.openfoam.com/

Cited In (only showing first 100 items - show all)

• High fidelity radiative heat transfer models for high-pressure laminar hydrogen–air diffusion flames
• Wall-adapting subgrid-scale models to apply to large eddy simulation of internal combustion engines
• Coupled simulation of flow-induced viscous and elastic anisotropy of short-fiber reinforced composites
• A supplementary strategy for coarsening in algebraic multigrid
• Study on CFD-PBM turbulence closures based on \(k\)-\(\varepsilon\) and Reynolds stress models for heterogeneous bubble column flows
• Thermal and rheological investigation of non-Newtonian fluids in an induced-charge electroosmotic micromixer
• A numerical study of blood flow using mixture theory
• A smoothed particle hydrodynamics approach for thermo-capillary flows
• An improved method for coupling the in-nozzle cavitation with multi-fluid-quasi-VOF model for diesel spray
• A comprehensive Lagrangian flame–kernel model to predict ignition in SI engines
• Turbulent flow in rough wall channels: \textit{validation} of RANS models
• OpenFOAM applied to the CFD simulation of turbulent buoyant atmospheric flows and pollutant dispersion inside large open pit mines under intense insolation
• Analysis of the wake dynamics of stiff and flexible cantilever beams using POD and DMD
• Numerical and experimental characterization of the 2D vertical average-velocity plane at the center-profile and qualitative air entrainment inside a gully for drainage and reverse flow
• Coupling of solvers with non-conforming computational domains in a dual-mesh hybrid LES/RANS framework
• Richtmyer-Meshkov instability of a liquid-gas interface driven by a cylindrical imploding pressure wave
• Fluid structures of flapping airfoil with elliptical motion trajectory
• Direct numerical simulation of droplet formation processes under the influence of soluble surfactant mixtures
• Numerical method for coupled interfacial surfactant transport on dynamic surface meshes of general topology
• Flow structure in a short chamber of a labyrinth seal with a backward-facing step
• Direct numerical simulation of electromagnetically forced flows using openfoam
• Nesting an incompressible-flow code within a compressible-flow code: a two-dimensional study
• A low-dissipative solver for turbulent compressible flows on unstructured meshes, with openfoam implementation
• An immersed boundary method in \textit{OpenFOAM} : verification and validation
• Electro-vortex flow simulation using coupled meshes
• Sequential homogenization of reactive transport in polydisperse porous media
• Modeling and simulation of bed dynamics in oxyfuel fluidized bed boilers
• Numerical prediction of turbulent flow structure generated by a synthetic cross-jet into a turbulent boundary layer
• Interaction between free surface flow and moving bodies with a dynamic mesh and interface geometric reconstruction approach
• Development of a compressible multiphase cavitation approach for diesel spray modelling
• Numerical modeling of laser generated cavitation bubbles with the finite volume and volume of fluid method, using OpenFOAM
• Implementation of the classical plasma-fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM
• Evaluation of oscillation-free fluid-porous interface treatments for segregated finite volume flow solvers
• Detached-eddy simulations of the flow over a cylinder at \(\mathrm{Re} = 3900\) using OpenFOAM
• From steady to unsteady laminar flow in model porous structures: an investigation of the first Hopf bifurcation
• Assessment of a one-way nesting procedure for obstacle resolved large eddy simulation of the ABL
• A new level set numerical wave tank with improved density interpolation for complex wave hydrodynamics
• Large-eddy simulations of flow normal to a circular disk at \(\mathit{Re} = 1.5 \times 10^5\)
• An accelerated computation of combustion with finite-rate chemistry using LES and an open source library for in-situ-adaptive tabulation
• A parallel volume of fluid-Lagrangian parcel tracking coupling procedure for diesel spray modelling
• Comparative study of different subgrid-scale models for large eddy simulations of magnetohydrodynamic turbulent duct flow in openfoam
• Numerical simulation of cavitation bubble collapse within a droplet
• Effects of numerical dissipation on the interpretation of simulation results in computational fluid dynamics
• Optimized temperature perturbation method to generate turbulent inflow conditions for LES/DNS simulations
• Enhancement of propulsive performance of flapping foil by fish-like motion pattern
• A biomimetic wind turbine inspired by \textit{Dryobalanops aromatica} seed: numerical prediction of rigid rotor blade performance with OpenFOAM\(^{\circledR}\)
• The implementation of subsonic boundary conditions for the direct simulation Monte Carlo method in dsmcFoam
• Towards a generalised dual-mesh hybrid LES/RANS framework with improved consistency
• Shock-conforming mesh generation for aerodynamic analyses at supersonic regimes
• Quasi-Newton methods for implicit black-box FSI coupling
• A hybrid DSMC/Navier-Stokes frame to solve mixed rarefied/nonrarefied hypersonic flows over nano-plate and micro-cylinder
• Generation of divergence free synthetic inflow turbulence with arbitrary anisotropy
• Consistent second-order time-accurate non-iterative PISO-algorithm
• A finite area scheme for shallow granular flows on three-dimensional surfaces
• Extending the robustness and efficiency of artificial compressibility for partitioned fluid-structure interactions
• Comparative study of spectral-element and finite-volume solvers for direct numerical simulation of synthetic jets
• Development of a parallelised fluid solver for problems with mesh interfaces and deforming domains
• Implicit boundary conditions for coupled solvers
• Direct numerical simulation of turbulent non-Newtonian flow using OpenFOAM
• Parametrization of the cumulant lattice Boltzmann method for fourth order accurate diffusion. II: Application to flow around a sphere at drag crisis
• Flow around an inclined circular disk
• CFD simulations of turbulent buoyant atmospheric flows over complex geometry: solver development in OpenFOAM
• Improved weighted compact nonlinear scheme for implicit large-eddy simulations
• A depletable micro-layer model for nucleate pool boiling
• A quasi-direct numerical simulation solver for compressible reacting flows
• Parametric solutions of turbulent incompressible flows in OpenFOAM via the proper generalised decomposition
• Powder-scale multi-physics modeling of multi-layer multi-track selective laser melting with sharp interface capturing method
• Numerically stable formulas for a particle-based explicit exponential integrator
• Hybrid fictitious domain-immersed boundary solver coupled with discrete element method for simulations of flows laden with arbitrarily-shaped particles
• Benchmark numerical simulations of segmented two-phase flows in microchannels using the volume of fluid method
• Validation of the diffusion mixture model for the simulation of bubbly flows and implementation in OpenFOAM
• Numerical investigation of skewed spatially evolving mixing layers
• An explicit gas kinetic scheme algorithm on non-uniform Cartesian meshes for GPGPU architectures
• Modeling of turbulent separated flows using OpenFOAM
• Lagrangian coherent structures in flow past a backward-facing step
• Biomass furnace study via 3D numerical modeling
• Near-wall modelling in Eulerian-Eulerian simulations
• Continuum analysis of rarefaction effects on a thermally induced gas flow
• Accelerated reactive transport simulations in heterogeneous porous media using Reaktoro and Firedrake
• Numerische Strömungsmechanik
• OpenFOAM for computational fluid dynamics
• Asymptotic theory of a flapping wing of a circular cross-section
• A boundary element method for Stokes flows with interfaces
• A numerical investigation of fluid flows induced by the oscillations of thin plates and evaluation of the associated hydrodynamic forces
• Direct numerical simulation of single gas bubbles in pure and contaminated liquids
• Heat transfer and shear-induced migration in dense non-Brownian suspension flows: modelling and simulation
• Arbitrary high order central non-oscillatory schemes on mixed-element unstructured meshes
• Open-source finite volume solvers for multiphase (\(n\)-phase) flows involving either Newtonian or non-Newtonian complex fluids
• Stencil selection algorithms for WENO schemes on unstructured meshes
• PhyGeoNet: physics-informed geometry-adaptive convolutional neural networks for solving parameterized steady-state PDEs on irregular domain
• Combining mathematical modeling and deep learning to make rapid and explainable predictions of the patient-specific response to anticoagulant therapy under venous flow
• Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling
• Effects of fuel cetane number on the structure of diesel spray combustion: An accelerated Eulerian stochastic fields method
• A multiscale model for the rupture of linear polymers in strong flows
• ICSFoam: an OpenFOAM library for implicit coupled simulations of high-speed flows
• OpenFOAM solver for thermal and chemical conversion in porous media
• varRhoTurbVOF: a new set of volume of fluid solvers for turbulent isothermal multiphase flows in OpenFOAM
• Inclusion of interactions in mathematical modelling of implant assisted magnetic drug targeting
• Computational methods for pore-scale simulation of rarefied gas flow
• A multi-moment constrained finite volume method on arbitrary unstructured grids for incompressible flows

This page was built for software: OpenFOAM