Direct and large eddy simulation of the transition of two- and three-dimensional plane plumes in a confined enclosure
The authors investigate the free convection flow induced by a line heat source in a confined geometry. The buoyancy forcing of this flow is characterized by Rayleigh number, Ra, which is chosen in the range where an intermittent spatial transition from laminar to turbulent flow takes place. The governing non-dimensional equations are solved numerically using a finite volume method in the case of air flow, i.e. the Prandtl number \(\text{Pr}=0.71\) and \(\text{Ra}= 10^{10}\). For the numerical simulation, the authors use the direct numerical simulation (DNS) and large eddy simulation (LES) schemes. First, they consider a two-dimensional representation of this flow at resolution of \(195^2\). Next the three-dimensional case at resolution of \(195^3\) has been treated. The three-dimensional simulation reveals a symmetrical time-mean recirculation which covers the domain above the heat source. The LES method for the same flow is carried out at a resolution of \(45^3\). There are many interesting results reported in this paper, but we mention here only the following ones: 1) the time-mean turbulent flow which arises under transient conditions shows a symmetrical profile. All fluctuations have their maximum near the top wall at the centre of the box. In particular, the fluctuations in the axial direction show a relatively sharp increase just below the top wall; 2) On the average, most of LES computations produce a solution which is similar to the DNS solution. Especially, relatively simple equilibrium models lead to a good agreement between LES and DNS.
- Large-eddy simulation of buoyancy-driven natural ventilation in an enclosure with a point heat source
- Large eddy simulation of transition to turbulence in natural convection in a horizontal annular cavity
- Large eddy simulation of a turbulent forced plume
- Direct and large-eddy simulations of a pure thermal plume
- scientific article; zbMATH DE number 65018
- Heat transfer and flow transitions of a thermal plume generated by a heating element on the enclosure bottom wall
- Numerical study of the transition to chaos of a buoyant plume from a two-dimensional open cavity heated from below
- Direct numerical simulations of a rapidly expanding thermal plume: structure and entrainment interaction
- Large-eddy simulation of buoyancy-driven natural ventilation in an enclosure with a point heat source
- Four dynamical regimes for a starting plume model
- Large-eddy simulation of a buoyant plume in uniform and stably stratified environments
- Large-eddy simulation and parameterization of buoyant plume dynamics in stratified flow
- General template units for the finite volume method in box-shaped domains
- Direct and large-eddy simulations of a pure thermal plume
- Direct numerical simulations of two- and three-dimensional turbulent natural convection flows in a differentially heated cavity of aspect ratio 4
- Energetics of buoyancy-generated turbulent flows with active scalar: pure buoyant plume
- Large eddy simulation of transition to turbulence in natural convection in a horizontal annular cavity
This page was built for publication: Direct and large eddy simulation of the transition of two- and three-dimensional plane plumes in a confined enclosure
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1579237)