A new \(k\)-\(\varepsilon\) eddy viscosity model for high Reynolds number turbulent flows

DOI10.1016/0045-7930(94)00032-TzbMath0825.76304OpenAlexW2032777079MaRDI QIDQ1892910

Jiang Zhu, Aamir Shabbir, Tsan-Hsing Shih, Zhigang Yang, William W. Liou

Publication date: 28 November 1995

Published in: Computers and Fluids (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/0045-7930(94)00032-t

Mathematics Subject Classification ID

(k)-(varepsilon) modeling in turbulence (76F60)

Related Items

Hydrodynamic analysis and optimization of the Titan submarine via the SPH and finite-volume methods ⋮ Reynolds stress turbulence modelling of surf zone breaking waves ⋮ Computational fluid dynamic simulation of small leaks in water pipelines for direct leak pressure transduction ⋮ On sensitivity of RANS simulations to uncertain turbulent inflow conditions ⋮ Computational analysis of turbulent super-cavitating flow around a two-dimensional wedge-shaped cavitator geometry ⋮ Evaluation and improvements of RANS turbulence models for linear diffuser flows ⋮ Computational study on turbulent flows around modern tanker hull forms ⋮ On the turbulence modelling of waves breaking on a vertical pile ⋮ CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer ⋮ Numerical investigation of erosion threshold velocity in a pipe with sudden contraction ⋮ Turbulent flow in rough wall channels: \textit{validation} of RANS models ⋮ Validation of OpenFOAM numerical methods and turbulence models for incompressible bluff body flows ⋮ A physically consistent and numerically robust \(k\)-\(\varepsilon\) model for computing turbulent flows with shock waves ⋮ Numerical modelling of the rise of Taylor bubbles through a change in pipe diameter ⋮ Numerical investigation of vorticity and bubble clustering in an air entraining hydraulic jump ⋮ Prediction of soot and thermal radiation in a model gas turbine combustor burning kerosene fuel spray at different swirl levels ⋮ Numerical simulation of particulate-flow in spiral separators. I: Low solids concentration (0.3\% \& 3\% solids) ⋮ Effect of the geometric parameters on a flexible fiber motion in a tangentially injected divergent swirling tube flow ⋮ Counteracting ring formation in rotary kilns ⋮ An assessment of turbulence models for linear hydrodynamic stability analysis of strongly swirling jets ⋮ A new non-linear RANS model with enhanced near-wall treatment of turbulence anisotropy ⋮ Numerical predictions of augmented heat transfer of an internal blade tip-wall by hemispherical dimples ⋮ Numerical study of the natural-cavitating flow around underwater slender bodies ⋮ A stopping criterion for the iterative solution of partial differential equations ⋮ Reduced kinetic mechanism for methane/oxygen rocket engine applications: a reliable and numerically efficient methodology ⋮ Rayleigh-Taylor and Richtmyer-Meshkov instability induced flow, turbulence, and mixing. II ⋮ The use of CFD for predicting and optimizing the performance of air conditioning equipment ⋮ Study of air-core vortical flow structure induced by a plughole vortex ⋮ Numerical Simulation of Particles in Steel Strand Casting Flow ⋮ Numerical analysis of unsteady flow features around a realistic estate vehicle with hybrid RANS/LES methods ⋮ Algebraic modifications of the \(k\)-\(\widetilde{\omega}\) and Spalart-Allmaras turbulence models to predict bypass and separation-induced transition ⋮ Effect of vent opening area and arrangement on gas flow field as gas propelled cylinder exits a flow tube ⋮ Analysis of the spread of SARS-CoV-2 in a hospital isolation room using CFD and Lagrangian coherent structures ⋮ Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques ⋮ Implementation of a transpiration velocity based cavitation model within a RANSE solver ⋮ New development of the turbulent Prandtl number models for the computation of film cooling effectiveness ⋮ Numerical simulation of flow field around the race car in case ⋮ Simulation of the effect of geometric parameters on tangentially injected swirling pipe airflow ⋮ On the effect of wind direction and urban surroundings on natural ventilation of a large semi-enclosed stadium ⋮ Unsteady RANS modeling of flow around two-dimensional rectangular cylinders with different side ratios at Reynolds number \(6.85 \times 10^5\) ⋮ Numerical investigation of impinging gas jets onto deformable liquid layers ⋮ A modeling approach to energy savings of flying Canada geese using computational fluid dynamics ⋮ Large-eddy simulation of thermal striping in unsteady non-isothermal triple jet ⋮ Simulating the motion of a flexible fiber in 3D tangentially injected swirling airflow in a straight pipe-effects of some parameters ⋮ Modeling of turbulent separated flows using OpenFOAM ⋮ Numerical simulation of Delft-jet-in-hot-coflow (DJHC) flames using the eddy dissipation concept model for turbulence-chemistry interaction ⋮ Modelling transition due to backward-facing steps using the laminar kinetic energy concept ⋮ Natural convection in a closed parallelepiped with a local energy source ⋮ COMPUTATIONAL INVESTIGATION OF THE FLOW IN PRE-SWIRL STATOR-ROTOR SYSTEMS ⋮ The analysis of the channel flow sensitivity to the parameters of thek-ε method ⋮ Numerical simulations of non-equilibrium turbulent boundary layer flowing over a bump ⋮ Evaluation of two RANS turbulence models in predicting developing mixed convection within a heated horizontal pipe ⋮ Simulation of an aggregate dryer using coupled CFD and DEM methods ⋮ Non-linear turbulence models for multiphase recirculating free-surface flow over stepped spillways ⋮ Modeling shock unsteadiness in shock/turbulence interaction ⋮ An improved air entrainment model for stepped spillways ⋮ Data-driven RANS closures for three-dimensional flows around bluff bodies ⋮ Aeroelastic analysis of turbomachinery ⋮ A detailed chemical kinetic model of high-temperature ethylene glycol gasification ⋮ Comparison of different turbulence models for numerical simulation of pressure distribution in V-shaped stepped spillway ⋮ Validation of flow simulation and gas combustion sub-models for the CFD-based prediction of NO_xformation in biomass grate furnaces ⋮ Finite-volume modelling of system with compressible flow propelled and actuated body motion ⋮ 3D tangentially injected swirling recirculating flow in a nozzle with a slotted-tube-Effects of groove parameters ⋮ Correlations and optimization of a heat exchanger with offset-strip fins ⋮ On two-dimensional predictions of turbulent cross-flow induced vibration: forces on a cylinder and wake interaction ⋮ Flow and mixing fields for transported scalar PDF simulations of a piloted jet diffusion flame (`Delft Flame III') ⋮ Discontinuous Galerkin solution of the RANS and \(k_L - k - \log (\omega)\) equations for natural and bypass transition ⋮ Influence of combustion parameters on \(NO_x\) production in an industrial boiler ⋮ Erosion and penetration rates of a pipe protruded in a sudden contraction ⋮ Numerical study of the hydrodynamics in a two-phase induction melter for nuclear waste treatment under various operating parameters ⋮ Towards a coupled multi-scale, multi-physics simulation framework for aluminium electrolysis ⋮ On the improved finite volume procedure for simulation of turbulent flows over real complex terrains ⋮ Mathematical Modelling of Vortex Generation Process in the Flowing Part of the Vortex Flowmeter and Selection of an Optimal Turbulence Model ⋮ Turbulent models of oil flow in a circular pipe with sudden enlargement ⋮ Effect of turbulent Prandtl number on the computation of film-cooling effectiveness ⋮ Influence of electromagnetic stirrer position on fluid flow and solidification in continuous casting mold ⋮ RANS closures for non-neutral microscale CFD simulations sustained with inflow conditions acquired from mesoscale simulations ⋮ Numerical investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles ⋮ Numerical investigation and optimization of the thermal performance of a brushless DC motor ⋮ Numerical modeling of 3D flow field among a compound stilling basin ⋮ Two-phase pressure drop caused by sudden flow area contraction/expansion in small circular pipes ⋮ Wind-blown particulate transport: a review of computational fluid dynamics models ⋮ Conditioning and accurate solutions of Reynolds average Navier–Stokes equations with data-driven turbulence closures ⋮ Numerical investigation of thermal characteristics of spray cooling with minimum quantity lubrication in milling process ⋮ Effects of the wind speeds on heat transfer in a street canyon with a skytrain station ⋮ Numerical simulation of tangentially injected turbulent swirling flow in a divergent tube ⋮ Stabilization mechanism of turbulent premixed flames in strongly swirled flows ⋮ Numerical investigation of a developmental pneumatically fed impact pulveriser ⋮ CFD modeling of mass transfer in annular reactors ⋮ Study on anisotropic buoyant turbulence model ⋮ Computational fluid dynamics based retrofits to reheater panel overheating of No. 3 boiler of Dagang power plant ⋮ Numerical simulation and analysis of water flow over stepped spillways ⋮ PDF modeling and simulation of premixed turbulent combustion ⋮ Evaluation of various turbulence models for numerical simulation of a multiphase system in a rotating packed bed ⋮ Assessment of various low-Reynolds number turbulence models in shock-boundary layer interaction ⋮ Recent advances on the numerical modelling of turbulent flows ⋮ Verification of a new CFD compressible segregated and multi-phase solver with different flux updates-equations sequences ⋮ Dynamic interaction of multiple buoyant jets ⋮ Numerical modelling of oxy-coal combustion to access the influence of swirl strength, combustion environment and gasification reactions on the flow and combustion behaviour ⋮ Mathematical modelling of an electrostatic oiling machine for steel strips

Cites Work