The numerical computation of turbulent flows

From MaRDI portal

Publication:1394006

Jump to:navigation, search

DOI10.1016/0045-7825(74)90029-2zbMath0277.76049OpenAlexW1981401379WikidataQ56214799 ScholiaQ56214799MaRDI QIDQ1394006

D. B. Spalding, B. E. Launder

Publication date: 1974

Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/0045-7825(74)90029-2

Mathematics Subject Classification ID

Isotropic turbulence; homogeneous turbulence (76F05)

Related Items

Anisotropic characteristics of turbulence dissipation in swirling flow: a direct numerical simulation study, Application of a sensitivity equation method to the \(k-\epsilon \) model of turbulence, A tribute to D.B. Spalding and his contributions in science and engineering, Source identification for unsteady atmospheric dispersion of hazardous materials using Markov chain Monte Carlo method, Mathematical modeling of toxic pollutants dispersion from large tank fires and assessment of acute effects for fire fighters, Brian spalding: CFD and reality - A personal recollection, Numerical simulation of UV disinfection reactors: evaluation of alternative turbulence models, Different numerical methods in the study of passive scalar transport in a pipelinex-junction, Adaptation of the law of the wall boundary treatment to include volumetric heating effects, A fully synthetic turbulent boundary condition with a homogeneous vortex distribution, A diffusion-inertia model for predicting dispersion and deposition of low-inertia particles in turbulent flows, Numerical simulation of turbulent natural convection in a rectangular enclosure having finite thickness walls, CFD analysis of convective heat transfer at the surfaces of a cube immersed in a turbulent boundary layer, Modeling for isothermal and cryogenic cavitation, Prediction of a turbulent non-premixed natural gas flame in a semi-industrial scale furnace using a radiative flamelet combustion model, Numerical investigation of erosion threshold velocity in a pipe with sudden contraction, Some new approaches to building and implementation of wall-functions for modeling of near-wall turbulent flows, A cavitation model for computations of unsteady cavitating flows, Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods, Numerical simulation of particulate-flow in spiral separators. I: Low solids concentration (0.3\% \& 3\% solids), Numerical simulation of vortex induced vibrations and its control by suction and blowing, Prediction of pressure oscillations in a premixed swirl combustor flow and comparison to measurements, Large eddy simulation of scalar mixing in a coaxial confined jet, Turbulence and cavitation models for time-dependent turbulent cavitating flows, Numerical investigation of turbulent free jet flows issuing from rectangular nozzles: the influence of small aspect ratio, A block LU-SGS implicit dual time-stepping algorithm for hybrid dynamic meshes, The validity of 2D numerical simulations of vortical structures around a bridge deck, On the effect of inflow conditions in simulation of a turbulent round jet, Acceleration of a Navier--Stokes equation solver for unstructured grids using agglomeration multigrid and parallel processing, A comparative study of turbulence models performance for separating flow in a planar asymmetric diffuser, Computational modelling of titanium particles in warm spray, Computational analysis of the performance of a Venturi-shaped roof for natural ventilation: Venturi-effect versus wind-blocking effect, Improved finite volume discretisations of entropy generation and turbulence production, Analysis and thermal optimization of an ecological ventilated self-weighted wood panel for roofs by FVM, Correcting anisotropic gradient transport of \(k\), Large-eddy simulation for an axisymmetric piston-cylinder assembly with and without swirl, Modelling turbulent premixed combustion using the level set approach for Reynolds-averaged models, Performances of LES and RANS models for simulation of complex flows in a coaxial jet mixer, CFD calculation of turbulent flow with arbitrary wall roughness, Mathematical simulation of hydrodynamic generators of oscillations, Direct test of a nonlinear constitutive equation for simple turbulent shear flows using DNS data, Progress in the self-similar turbulent flame premixed combustion model, Stabilized finite element method for incompressible flows with high Reynolds number, Partitioned solution to fluid-structure interaction problem in application to free-surface flows, Brian Spalding: CFD \& reality. A personal recollection, Method of near-wall conditions for investigating flows and heat transfer at high turbulence intensity, The potential of large eddy simulation (LES) code for the modeling of flow in diesel injectors, Experimental and numerical investigation of unsteady cavitating flows through a 2D hydrofoil, Numerical simulation of three-dimensional turbulent separated and reattaching flows using a modified turbulence model, High resolution turbulence modelling of airflow in an idealised human extra-thoracic airway, A numerical study of developing slurry flow in the entrance region of a horizontal pipe, Investigation of density flow in dam reservoirs using a three-dimensional mathematical model including Coriolis effect, Incomplete sensitivities for 3D radial turbomachinery blade optimization, Performance of a bend-diffuser system: experimental and numerical studies, Airflow in a slot-ventilated enclosure partially filled with porous boxes. I: Measurements and simulations in the clear region, A 3D finite element model for free-surface flows, On the effect of wind direction and urban surroundings on natural ventilation of a large semi-enclosed stadium, Modeling of indoor airflow and dispersion of aerosols using immersed boundary and random flow generation methods, Effects of submersion depth on wave uplift force acting on Biloxi Bay Bridge decks during Hurricane Katrina, A new method for the treatment of wetting-drying fronts, Assessment of turbulence modeling for gas flow in two-dimensional convergent-divergent rocket nozzle, The comparison of incomplete sensitivities and genetic algorithms applications in 3D radial turbomachinery blade optimization, Improved CFD transport and boundary conditions models for low-inertia particles, CFD analysis of performance characteristics of S-shaped diffusers with combined horizontal and vertical offsets, Numerical aspects of including wall roughness effects in the SST \(k-\omega \) eddy-viscosity turbulence model, Numerical simulation of indoor suspension particles based on \(v^{2}\)-\(f\) model, Numerical simulation on the effect of jet nozzle position on impingement cooling of gas turbine blade leading edge, Self-heating in a bioreactor: coupling of heat and mass transfer with turbulent convection, Numerical calculations of aerial dispersion from elevated sources, Numerical modelling of wind effects on breaking solitary waves, Robust analysis of cavitating flows in the Venturi tube, Mathematical modeling of turbulent fiber suspension and successive iteration solution in the channel flow, Inverse design involving combined radiative and turbulent convective heat transfer, On the representation of turbulent stresses for computing blood damage, Effect of the turbulent viscosity relaxation time on the modeling of nozzle and jet flows, Single-phase and two-phase cooling using hybrid micro-channel/slot-jet module, Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module, A non-hybrid method for the PDF equations of turbulent flows on unstructured grids, Three-dimensional effects of an air curtain used to restrict cold room infiltration, Exact non-overlapping domain decomposition for near-wall turbulence modeling, Modeling of internal reacting flows and external static stall flows using RANS and PRNS, Effects of turbulence and inlet moisture on two-phase spontaneously condensing flows in transonic nozzles, Analytical and numerical solutions of the problem of gravity-induced mixing of a light layer using the \(k\)-\(\epsilon\) turbulence model, Turbulent flows in channels with injection. Results of large eddy simulation and the two-equation turbulence model, Numerical modeling of turbulence-induced interfacial instability in two-phase flow with moving interface, Computational study of decaying annular vortex flow using the \(R_{\epsilon }/k - \epsilon \) turbulence model, Modeling steady axis-symmetric thermal plasma flow of air by a parallelized magneto-hydrodynamic flow solver, Computational fluid dynamic analysis and design optimization of jet pumps, Modeling of axis-symmetric steam plasma flow in a non-transferred torch, Numerical study of the optimum counter-flow mode of air jets in a large utility furnace, Computing reactive flows with a field Monte Carlo formulation and multi-scale methods, Prediction of homogeneous shear flow and a backward-facing step flow with some linear and non-linear \(k\)-\(\varepsilon\) turbulence models, A numerical study of algebraic flux models for heat and mass transport simulation in complex flows, Mathematical simulation of hydrocyclones, Numerical analysis of two-dimensional compressible turbulent flows in a turbine stage, A new mixed basis Navier-Stokes formulation for incompressible flows over complex geometries, Assessment of a hybrid finite element and finite volume code for turbulent incompressible flows, Numerical modeling of interaction of a current with a circular cylinder near a rigid bed, History recovery and source identification of multiple gaseous contaminants releasing with thermal effects in an indoor environment, Investigation into the finite element analysis of confined turbulent flows using a k-epsilon model of turbulence, Wall-modeled large eddy simulation of turbulent heat transfer by the lattice Boltzmann method, On modelling the Reynolds stress in the context of continuum mechanics, LANs-\(\alpha\) turbulence modeling for coastal sea: an application to Alderney Race, Effects of cell quality in grid boundary layer on the simulated flow around a square cylinder, Level set-based topology optimization for two dimensional turbulent flow using an immersed boundary method, \(S\)-frame discrepancy correction models for data-informed Reynolds stress closure, Recent advances in the Marker and Cell Method, Steady laminar forced convection from an elliptic cylinder, Low-Reynolds number approximation for turbulent eddy viscosity, Invariant discretization of the \(k\)-\(\varepsilon\) model in general co- ordinates for prediction of turbulent flow in complicated geometries, A new \(k\)-\(\varepsilon\) eddy viscosity model for high Reynolds number turbulent flows, Evaluation of the performance of three turbulence closure models in the prediction of confined swirling flows, Numerical study of turbulent airflow structure and transfer of heat having trapezoidal baffles attached on the walls and centerline of the rectangular channel, Turbulence modelling of shallow water flows using Kolmogorov approach, Computational study of periodically unsteady interaction between a wall jet and an offset jet for various velocity ratios, Comparison of turbulence closures for optimized active control, Assessment of turbulence model performance: severe acceleration with large integral length scales, Large-eddy simulation of an air curtain confining a cavity and subjected to an external lateral flow, Inflow/outflow pressure boundary conditions for smoothed particle hydrodynamics simulations of incompressible flows, A biomimetic wind turbine inspired by \textit{Dryobalanops aromatica} seed: numerical prediction of rigid rotor blade performance with OpenFOAM\(^{\circledR}\), Comparative study of boundary layer control around an ordinary airfoil and a high lift airfoil with secondary blowing, Numerical modeling of density currents using an incompressible smoothed particle hydrodynamics method, Development of a parallelised fluid solver for problems with mesh interfaces and deforming domains, Calculation of isothermal turbulent three-dimensional free multijet flows, Numerical simulation of flows encountered during mold-filling, On the numerical computation of turbulent fluid flow in CAS steelmaking operations, Combined numerical and experimental simulations of unsteady ship airwakes, A novel method for bounding the phase fractions at both ends in Eulerian multi-fluid model, Finite time blow-up for some parabolic systems arising in turbulence theory, The equations of complete depth-averaged turbulence model in general orthogonal coordinates, High-speed GSMAC-FEM for wind engineering, Turbulent fluid flow and its incorporation into combustion processes, Simulation of gas injection into liquid melts, CFD predictions of lobed mixer performance, Reduced order model of standard \(k\)-\(\epsilon\) turbulence model, Numerical simulation of three-dimensional turbulent flow in suddenly expanded rectangular duct, Bayesian calibration of the constants of the \(k-\varepsilon\) turbulence model for a CFD model of street canyon flow, Effect of bottom wall proximity on the unsteady flow structures of a combined turbulent wall jet and offset jet flow, Summarizing an Eulerian-Lagrangian model for subsea gas release and comparing release of CO\(_2\) with CH\(_4\), Numerical study on the limit of power extraction by a dense cross-stream array of wind turbines, Data-driven modelling of the Reynolds stress tensor using random forests with invariance, Rayleigh-Taylor and Richtmyer-Meshkov instability induced flow, turbulence, and mixing. II, Revisiting URANS computations of the backward-facing step flow using second moment closures: influence of the numerics, On the performance of linear and nonlinear \(k-\epsilon\) turbulence models in various jet flow applications, Large-eddy simulation coupled with wall models for turbulent channel flows at high Reynolds numbers with a lattice Boltzmann method -- application to Coriolis mass flowmeter, The scale-adaptive simulation method for unsteady turbulent flow predictions. I: Theory and model description, The scale-adaptive simulation method for unsteady turbulent flow predictions. II: Application to complex flows, Multifidelity probability estimation via fusion of estimators, Incompressible turbulent flow simulation using a Galerkin/least-squares formulation and a low Reynolds number \(k-\epsilon\) model, Computation of shock/boundary-layer interactions in bump channels with transport-type turbulence models, Torsional springs for two-dimensional dynamic unstructured fluid meshes, A quadtree-based adaptive Cartesian/Quad grid flow solver for Navier-Stokes equations, Numerical study of the turbulent unsteady wake behind a partially enclosed square cylinder using RANS, Large-eddy simulation of flow turbulence in clarification systems, Modelling of fluid-structure interaction for moderate Reynolds number flows using an immersed-body method, Modelling and optimization of an inclined plane classifier using CFD-DPM and the Taguchi method, Investigation of wind turbine wakes and wake recovery in a tandem configuration using actuator line model with LES, Efficient sensing of von Kármán vortices using compressive sensing, Improved wall model treatment for aerodynamic flows in LBM, Multi objective optimization of aspirating smoke detector sampling pipeline, Applying a non-equilibrium wall function in \(k\)-\({\varepsilon}\) turbulent modelling of hydrodynamic circulating flow, A comprehensive presentation of the turbulent plane jet theory with passive scalar, Numerical simulation and experiments on turbulent air flow around the semi-circular profile at zero angle of attack and moderate Reynolds number, Near-wall treatment for the simulation of turbulent flow by the cumulant lattice Boltzmann method, Unsteady interface boundary conditions for near-wall turbulence modeling, On extension of near-wall domain decomposition to turbulent compressible flows, Near-wall behavior of RANS turbulence models and implications for wall functions, Numerical study of the effect of changing the cyclone cone length on the gas flow field, Spatial distribution of mean age and higher moments of unsteady and reactive tracers: reconstruction of residence time distributions, Multiphase flow modeling and optimization for online wash systems of gas turbines, VLES turbulence model for an Eulerian-Lagrangian modeling concept for bubble plumes, Turbulent models of oil flow in a circular pipe with sudden enlargement, A multi-dimensional Lagrangian algebraic slip mixture model for bubble column reactors, Smoothed particle hydrodynamic simulation of hydraulic jump using periodic open boundaries, On mathematical models and numerical solutions of gas stirred ladle systems, Numerical evaluation of the suppression effect of a free-to-rotate triangular fairing on the vortex-induced vibration of a circular cylinder, RANS closures for non-neutral microscale CFD simulations sustained with inflow conditions acquired from mesoscale simulations, Development and validation of a homogeneous flow model for simulating cavitation in cryogenic fluids, A revisit of Navier-Stokes equation, Numerical modeling of 3D flow field among a compound stilling basin, Three-dimensional analysis of flow in the spiral casing of a reaction turbine using a differently weighted Petrov-Galerkin method, Numerical and experimental study of oscillatory behavior of liquid surface agitated by high-speed gas jet, Numerical study of local entropy generation in a heated turbulent plane jet developing in a co-flowing stream, Use of tensor polynomials for constructing an equation for turbulence scale in semiempirical models, Calculation of turbulent gas-dispersion flows in channels with recirculation eddies, Reformulation and improvement of a universal subgrid eddy viscosity model based on the multiscale framework, Multi-fidelity optimization of super-cavitating hydrofoils, Implementation and validation of a Lagrangian spray model using experimental data of the ECN spray G injector, OpenFOAM based conditional moment closure (CMC) model for solving non-premixed turbulent combustion: integration and validation, Turbulence models and their applications to the prediction of internal flows: A review, The mathematical modelling of turbulent flows, Effect of acceleration on the internal fluid characteristics of liquid floated gyro, Data-driven RANS closures for wind turbine wakes under neutral conditions, Numerical modeling of the fluid flow in continuous casting tundish with different control devices, Modeling the impact of the viaduct on particles dispersion from vehicle exhaust in street canyons, A computational slip boundary condition for near-wall turbulence modeling, Computation of unsteady viscous flows around moving bodies using the \(k\)-\(\varepsilon\) turbulence model on unstructured dynamic grids, A sigma coordinate 3D \(k-{\varepsilon}\) model for turbulent free surface flow over a submerged structure, Effect of compressibility on the trapped vortex in the gap between the coaxial disk and cylinder and the drag of their arrangement for axisymmetric sub-, trans-, and supersonic flow, Low Reynolds number turbulent flows around a dynamically shaped airfoil, CFD study of forced convective heat transfer enhancement in a 90\(^\circ\) bend duct of square cross section using nanofluid, Grid-independent depth-averaged simulations with a collocated unstructured finite volume scheme, Computational fluid dynamic simulation of small leaks in water pipelines for direct leak pressure transduction, Mathematical modelling of a compressible oxygen jet entering a hot environment using a pressure-based finite volume code, Interface boundary conditions in near-wall turbulence modeling, Stabilized finite element solution to handle complex heat and fluid flows in industrial furnaces using the immersed volume method, ALE-VMS AND ST-VMS METHODS FOR COMPUTER MODELING OF WIND-TURBINE ROTOR AERODYNAMICS AND FLUID–STRUCTURE INTERACTION, Modeling the interaction of solitary waves and semi-circular breakwaters by using unsteady Reynolds equations, A CFD assisted control system design with applications to NO_xcontrol in a FGR furnace, Compound wall treatment with low-Re turbulence model, Unnamed Item, On the performance of sudden-expansion pipe without/with cross-flow injection: experimental and numerical studies, Analysis of Combustion and Turbulence Models in a Cylindrical Combustion Chamber, Non-unique convection in a three-dimensional slot-vented cavity with opposed jets, A k–ε turbulence model based on the scales of vertical shear and stem wakes valid for emergent and submerged vegetated flows, Modeling, analysis, and numerical solution of stirred liquid-liquid dispersions, Numerical simulation of a radial diffuser turbulent airflow, An analytical consideration of steady-state forced convection within a nanofluid-saturated metal foam, Modeling of turbulent, isothermal and cryogenic cavitation under attached conditions, Application of the method of near-wall boundary conditions to an investigation of turbulent flows with longitudinal pressure gradients, Towards a unified turbulence simulation approach for wall-bounded flows, Numerical investigations of turbulent free surface flows using TOPUS scheme, Multiphase particle method using an elastoplastic solid phase model for the diffusion of dumped sand from a split hopper, A high-order discontinuous Galerkin solver for the incompressible RANS equations coupled to the \(k\)-\(\varepsilon\) turbulence model, Formulation of wall boundary conditions in turbulent flow computations on unstructured meshes, A k-ε model for turbulent mixing in shock-tube flows induced by Rayleigh–Taylor instability, Comparison of the mean flow and turbulence characteristics of a single offset jet and a dual offset jet, Radiation effect on conjugate turbulent natural convection in a cavity with a discrete heater, Application of an Optimized SLW Model in CFD Simulation of a Furnace, Numerical Analysis of Turbulent Convective Heat Transfer in a Rotor-Stator Configuration, Acoustic boundary layers as boundary conditions, Computational study of a turbulent wall jet flow on an oblique surface, Simulations of the PC boiler equipped with complex swirling burners, Modeling and optimization of an incinerator plant for the reduction of the environmental impact, Numerical simulation of turbulent natural convection combined with surface thermal radiation in a square cavity, Numerical simulation and experiment validation of level-pour direct-chill casting of A390 alloy hollow billets under different feeding schemes, Hybrid data-driven closure strategies for reduced order modeling, Modeling and assessment of the flow and air pollutants dispersion during chemical reactions from power plant activities, Development of a hybrid Lagrange-Euler transition model for the film formation and dynamics of an impinging liquid spray, PDE-constrained models with neural network terms: optimization and global convergence, Turbulent heat transfer in a channel with bars in tandem and in side by side arrangements, Fluid flow and heat transfer in gas jet quenching of a cylinder, Unsteady Simulation of a Jet-in-crossflow, Numerical characterization of a planar turbulent offset jet over an oblique wall, Numerical simulation of coherent turbulent structures and of passive scalar dispersion in a canopy sub-layer, Performance and implementation of the Launder-Sharma low-Reynolds number turbulence model, Surrogate model-based strategy for cryogenic cavitation model validation and sensitivity evaluation, Spectral nonequilibrium in a turbulent mixing layer, The analysis of the channel flow sensitivity to the parameters of thek-ε method, An iterative (k‐L)‐predictor/ε‐corrector algorithm for solving (k‐ε) turbulent models, Numerical simulations of non-equilibrium turbulent boundary layer flowing over a bump, Modelling of solids distribution in stirred tanks: analysis of simulation strategies and comparison with experimental data, On using the wall function and the staggered grid arrangement at upwind sharp convex corners in simulating approach air flow, Comparison of near-wall treatment methods for high Reynolds number backward-facing step flow, CFD wind tunnel test: Field velocity patterns of wind on a building with a refuge floor, Numerical simulation of the target system of an ADSS, A manufactured solution for a two-dimensional steady wall-bounded incompressible turbulent flow, Numerical study of wind loads on a low-rise pitched roof building with spirelet, Multi-component free surface flows and rotating devices in the context of minerals processing, A perspective on turbulence models for aerodynamic flows, Explicit algebraic Reynolds stress and non-linear eddy-viscosity models, Non-linear turbulence models for multiphase recirculating free-surface flow over stepped spillways, A free surface finite element model for low Froude number mould filling problems on fixed meshes, Incompressible flows with combustion simulated by a preconditioning method using multigrid acceleration and MUSCL reconstruction, Numerical simulation of large scale hydrogen explosions in complex geometries, Determination of applicable input range for approximating a nonlinear FGR furnace around the design point, A new approach to design a control system for a FGR furnace using the combination of the CFD and linear system identification techniques, Numerical simulation of the flow field in the vicinity of an axial flow fan, A CFD Study of Air Movement in Designated Refuge Floor, Mathematical modeling of the argon oxygen decarburization converter exhaust gas system at the reduction stage, An assessment of streamline curvature effects on the mixing region of a turbulent plane jet in crossflow, Prediction of Turbulent Separated Flow in a Turnaround Duct Using Wall Functions and Adaptivity, Object-oriented Implementation of the Galerkin Finite Element Method and Its Application to the Numerical Study of Natural Convective Flows in Enclosures, Computation of Compressible Flows using a Two-equation Turbulence Model on Unstructured Grids, A numerical approach for shape optimization of fluid flow domains, Mathematical modelling of three-dimensional heated surface jets, On unified boundary conditions for improved predictions of near-wall turbulence, Finite element analysis of laminar and turbulent flows using LES and subgrid-scale models, CFD of turbulent transport of particles behind a backward-facing step using a new model--\(k-\epsilon -S_{p}\), Computation of flow-induced motion of floating bodies, Implementation of physical boundary conditions into computational domain in modelling of oscillatory bottom boundary layers, The natural viscosity of turbulence, Detailed measurements of a statistically steady Rayleigh–Taylor mixing layer from small to high Atwood numbers, Numerical simulation of turbulent flows in trapezoidal meandering compound open channels, Experimental and Numerical Flow Visualization of a Single Square Cylinder, Two-phase pressure drop caused by sudden flow area contraction/expansion in small circular pipes, A novel implicit numerical treatment for non-linear turbulence models using high and low Reynolds number formulations, Conditioning and accurate solutions of Reynolds average Navier–Stokes equations with data-driven turbulence closures, Implicit meanflow-multigrid algorithms for Reynolds stress model computation of 3-D anisotropy-driven and compressible flows, Optimal control of diffuser shapes for non-uniform flow, kεα: a three‐equation eddy‐viscosity model of turbulence, Spectral transport model for turbulence, An improved near-wall treatment for turbulent channel flows, Numerical prediction of droplet dynamics in turbulent flow, using the level set method, The use of the Reynolds force vector in a physics informed machine learning approach for predictive turbulence modeling, Implicitly coupled phase fraction equations for the Eulerian multi-fluid model, Application of Taylor series expansion and Least-squares-based lattice Boltzmann method to simulate turbulent flows, On the minimal representation of non-linear eddy-viscosity models, The use of wall functions for simulating the turbulent thermal boundary layer, Numerical simulation of a turbulent flow in the Francis hydroturbine, Numerical simulation of solids flow in a blast furnace, CFD modelling of thickeners at Worsley Alumina PTY Ltd., An experimental and numerical CFD study of turbulence in a tundish container, CFD simulation of a slurry bubble column: effect of population balance kernels, A numerical investigation of the turbulent flow-field at the stern of a body of revolution, Implementation of near-wall boundary conditions for modeling boundary layers with free-stream turbulence, Modelling of turbulent reacting flows past a bluff body: Assessment of accuracy and efficiency, Dynamic flow modelling in precipitator vessels -- a study of turbulence modelling approaches, Efficient simulation of gas-liquid pipe flows using a generalized population balance equation coupled with the algebraic slip model, Computer analysis of multi-dimensional, turbulent, buoyancy-induced, two- phase flows in gas-agitated-liquid reactors, Modelling of a single confined turbulent slot jet impingement using various \(k-\varepsilon\) turbulence models, Experimental and numerical study of axial turbulent fluid flow and heat transfer in a rotating annulus, A calculation procedure for turbulent flow in complex geometries, Numerical study of turbulent wall jet over multiple-inclined flat surface, Investigations of empirical coefficients of cavitation and turbulence model through steady and unsteady turbulent cavitating flows, Study on CFD-PBM turbulence closures based on \(k\)-\(\varepsilon\) and Reynolds stress models for heterogeneous bubble column flows, Mixing of gases due to injection of a low-pressure jet into a cross-flow, Application of LES-quality criteria to internal combustion engine flows, PANORMUS-SPH. A new smoothed particle hydrodynamics solver for incompressible flows, Applicability of the standard k-epsilon turbulence model to gas-stirred baths, Interpolating matrix method: A finite difference method for arbitrary arrangement of mesh points, A theoretical simulation of fire extinction by water spray in a computer cabinet, A local grid refinement technique based upon Richardson extrapolation, A revised version of the k-kL turbulence model for near-wall flows, Assessment of grid interface treatments for multi-block incompressible viscous flow computation, A numerical model of slug flow in vertical tubes, Numerical prediction of separation and reattachment of turbulent flow in axisymmetric diffuser, The numerical simulation of fully developed duct flows, Problems of modeling gas-particle turbulent flows with combustion and phase transitions. Review, Investigation into the finite element analysis of enclosed turbulent diffusion flames, Numerical predictions of three-dimensional flow in a ventilated room using turbulence models, Effect of inlet and outlet boundary conditions on swirling flows, Numerical study of air-jet vortex generators in a turbulent boundary layer., Numerical study of the flow over shallow cavities, Computation of turbulent flow in general domains, Numerical solution of the Navier-Stokes equations for a rotating fluid flow in a cylindrical pipe, Predictions of two-dimensional boundary layers with the aid of the k- epsilon model of turbulence, Wall functions for numerical modeling of laminar MHD flows., Numerical analysis of confined turbulent flow, Streamwise computation of three-dimensional parabolic flows, Prediction of viscous flow around a fully submerged appended body, Turbulent separation flows, Numerical calculations of steady three-dimensional turbulent jets in cross flow, A numerical study of the turbulent flow of molten steel in a domain with a phase-change boundary., Nonlinear \(k-\varepsilon\) turbulence model results for flow over a building at full-scale, Application of electromagnetic forces to reduce tundish nozzle clogging, Comparison of three buoyancy extended versions of the \(k-\epsilon-\overline{{t'}^2}\) model in predicting turbulent plane plume, Single-phase hybrid micro-channel/micro-jet impingement cooling, Three-dimensional numerical simulation of nonisotropic thermal density flow in a strongly curved open channel, A temperature fluctuation equation model dedicated to the computation of turbulent thermal layers in high Reynolds internal flows, Computation of turbulent free convection in left and right tilted porous enclosures using a macroscopic \(k-\varepsilon \)model, Effects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme, Analysis of wall-function approaches using two-equation turbulence models, Analysis of an RNG based turbulence model for separated flows, On the higher-order bounded discretization schemes for finite volume computations of incompressible flows, Numerical simulations of viscous rotating flows using a new pressure- based method, Numerical simulation of the flow field of a diffused pneumatic silencer, A macroscopic two-energy equation model for turbulent flow and heat transfer in highly porous media, 3D numerical simulation of flow and conjugate heat transfer through a pore scale model of high porosity open cell metal foam, An efficient PDF calculation of flame temperature and major species in turbulent non-premixed flames, Computational studies of the pitched blade turbines design effect on the stirred tank flow characteristics, Modelling turbulent high Schmidt number mass transfer across undeformable gas-liquid interfaces, A synthesis of tortuosity and dispersion in effective thermal conductivity of porous media, The prediction of the three-dimensional turbulent flow field in a flow- splitting tee-junction, 3D conjugate heat transfer with thermal radiation in a hollow cube exposed to external flow, Simulation of turbulent impinging jet into a cylindrical chamber with and without a porous layer at the bottom, Turbulence modeling for flow in a distribution manifold, Heat, mass and momentum transfer across a wavy boundary, Use of concentration-pulsation equation in the calculation of jet-type turbulent flows, Computational visualization of unsteady flow around vehicles using high performance computing, Numerical modeling of wave overtopping a levee during hurricane Katrina, Induced co-flow and laminar-to-turbulent transition with synthetic jets, Simulation of free surface recirculating flows in semi-enclosed water bodies by a \(k-\omega\) model, Laminar flamelet modelling of turbulent premixed combustion, Verified predictions of shape sensitivities in wall-bounded turbulent flows by an adaptive finite-element method, Three-dimensional simulation of a side discharge into a cross channel flow., Two-fluid and population balance models for subcooled boiling flow, Computational modelling of bubbles, droplets and particles in metals reduction and refining, Computational fluid dynamics modelling of gas jets impinging onto liquid pools, CFD modeling of mass transfer in annular reactors, Flow simulation past axisymmetric bodies using four different turbulence models, Numerical simulation of sound field in axisymmetric jet of incompressible fluid, Computational fluid dynamics based retrofits to reheater panel overheating of No. 3 boiler of Dagang power plant, The method of boundary condition transfer in application to modeling near-wall turbulent flows, Domain decomposition for near-wall turbulent flows, DNS and modeling of the turbulent boundary layer over an evaporating liquid film, Numerical studies of three turbulent slot jets with and without moving surface, Influence of turbulence model constants and boundary conditions on the computed hydrodynamic variables in gas-stirred reactors, Modelling of stretched natural gas diffusion flames, A simple computational model for bubble plumes, Numerical study of turbulent heat transfer and flow characteristics of hot flow over a sudden expansion with base mass injection, Comparisons of two commercial computational fluid dynamics codes in modelling pulverised coal combustion for a 2. 5 MW burner, Numerical modelling of subcritical open channel flow using the k- \(\epsilon\) turbulence model and the penalty function finite element technique, Numerical studies on the transient behaviour of a fire plume and ceiling jet, A semiempirical model of turbulent stratified flow, Calculation of the momentum and heat transfer in turbulent gas-particle jet flows, A three-dimensional passage flow analysis method aimed at centrifugal impellers, A look at a problem in heat transfer, An improved fluid flow model for slab tundishes and its comparison with a full-scale water model, Numerical calculation of turbulent corner flows, Parallelisation of selective algebraic multigrid for block-pressure-velocity system in OpenFOAM, Comparison of different data-assimilation approaches to augment RANS turbulence models, Validation of RANS Turbulence Models for the Conjugate Heat Exchange Problem, Numerical analysis of unsteady flow features around a realistic estate vehicle with hybrid RANS/LES methods, Data-driven inference of low order representations of observable dynamics for an airfoil model, A highly accurate strategy for data-driven turbulence modeling, Wind loads on lightweight structures: Numerical simulation and wind tunnel tests, Effectiveness of several turbulence models in natural convection, Effectiveness of several turbulence models in natural convection, A numerical method for the transonic cascade flow problem, The performance ofin situadaptive tabulation in computations of turbulent flames, URANS computations for a complex internal isothermal flow, Modeling of a front wall fired utility boiler for different operating conditions, Multiscale lattice Boltzmann schemes with turbulence modeling, Computational fluid dynamics applications on parallel-vector computers: Computations of stirred vessel flows, Numerical study of turbulent diesel flow in a pipe with sudden expansion, 3D numerical simulation of ambient discharge of buoyant water, Wall-function treatment in pdf methods for turbulent flows, A theoretical study of the turbulent diffusion in incompressible shear flows and in passive scalars, Some numerical schemes using curvilinear coordinate grids for incompressible and compressible Navier-Stokes equations., Asymmetric turbulent jet flows., Mixing in T-junctions, Unnamed Item, Unnamed Item, A mathematical model of turbulence modulation in particle-laden pipe flows, Hybrid modelling for simulation of scour and flow patterns in laboratory flumes, NUMERICAL INVESTIGATION OF TURBULENT SHALLOW RECIRCULATING FLOWS BY A QUASI-THREE-DIMENSIONALk-εMODEL, Coaxial jets with disparate viscosity: mixing and laminarization characteristics, Single and multi-row turbine performance in bounded shear flow, Numerical and experimental analysis of shallow turbulent flow over complex roughness beds, Mean-flow and turbulent characteristics of free and impinging jet flows, Численное моделирование распространения выбросов автотранспорта в уличном каньоне, Computational study on turbulent flows around modern tanker hull forms, Transition from vortex to wall driven turbulence production in the Taylor-Couette system with a rotating inner cylinder, NUMERICAL MODELLING OF POLLUTION TRANSPORT IN TOM RIVER, Improved linear interpolation practice for finite-volume schemes on complex grids, Application of genetic algorithms to the development of a variable Schmidt number model for jet‐in‐crossflows, Flow and mixing fields of turbulent bluff-body jets and flames, A numerical investigation of 2d, steady free surface flows, NUMERICAL PREDICTION OF TWO-PHASE FLOW IN BUBBLE COLUMNS, On explicit algebraic stress models for complex turbulent flows, A new second-moment closure approach for turbulent swirling confined flows, An Investigation of the Impact of Floor Setting on Airflow and Smoke Extraction in Designated Refuge Floor, One-equation model for quasi-two-dimensional turbulent magnetohydrodynamic flows, Probability density function modeling of scalar mixing from concentrated sources in turbulent channel flow, Mixing and evaporation of liquid droplets injected into an air stream flowing at all speeds, Reynolds stress closure for nonequilibrium effects in turbulent flows, Direct simulations for wall modeling of multicomponent reacting compressible turbulent flows, A numerical study of the similarity of fully developed turbulent flows in orthogonally rotating square ducts and stationary curved square ducts, Numerical aerodynamic simulations of a NACA airfoil using CFD with block-iterative coupling and turbulence modelling, Manufactured solutions for steady-flow Reynolds-averaged Navier–Stokes solvers, A numerical study of flow separation and reattachment on a blunt plate, A Developed Numerical Method for Turbulent Unsteady Fluid Flow in Two-Phase Systems with Moving Interface, Parallel simulation of a utility boiler. Part I: mathematical model and numerical solution method, The energy decay in self-preserving isotropic turbulence revisited, Using mathematical optimization in the CFD analysis of a continuous quenching process, An implicit mixed finite-volume-finite-element method for solving 3D turbulent compressible flows, Development of turbulence models for shear flows by a double expansion technique, Noise reduction mechanisms of sawtooth and combed-sawtooth trailing-edge serrations, Numerical study of turbulent flow over two-dimensional surface-mounted ribs in a channel, Prediction of turbulent gas-solids flow in curved ducts using the Eulerian-Lagrangian method, Computation of the turbulent flow field around an aerofoil by k‐ϵ‐γ model in a non‐staggered, C‐type single‐grid system, Jet-installation noise and near-field characteristics of jet–surface interaction, Prediction of installed jet noise, Local block refinement with a multigrid flow solver, Numerical Methods for Dispersed Multiphase Flows, Numerical laminar and turbulent fluid flow and heat transfer predictions in tube banks, Unnamed Item, Unnamed Item, The interactions between wave-currents and offshore structures with consideration of fluid viscosity, Unnamed Item, Combination of CFD and DOE to analyse solid particle erosion in elbows, A scaling analysis of turbulent flows driven by Rayleigh–Taylor and Richtmyer–Meshkov instabilities, The Effects of Vortex Generator Arrays on Heat Transfer and Flow Field, Comparing displacement ventilation and mixing ventilation as HVAC strategies through CFD, Fractal-like actuator disc theory for optimal energy extraction, Numerical and analytical solution of compressible flow over double wedge and biconvex airfoils, SPARSE—A subgrid particle averaged Reynolds stress equivalent model: testing witha prioriclosure, Modeling Dense Suspension of Solid Particles in Highly Compressible Flows, Numerical Simulation of Frigate Airwakes, CFD simulation of wood chip combustion on a grate using an Euler–Euler approach, Two-scale dynamics of flow past a partial cross-stream array of tidal turbines, Progressive mesh refinement for flow modelling, A semi-coarsening strategy for unstructured multigrid based on agglomeration, Flow, turbulence, and pollutant dispersion in urban atmospheres, Resolving unsteady micro-scale atmospheric flows by nesting a CFD simulation into wide range numerical weather prediction models, Implicit unfactored implementation of two-equation turbulence models in compressible Navier-Stokes methods, An evolutionary optimization of diffuser shapes based on CFD simulations, Computational method for turbulent supersonic flows, APPLICATION OF A PRESSURE CORRECTION METHOD FOR MODELING INCOMPRESSIBLE FLOW THROUGH TURBOMACHINES, Higher-Order Flux-Limiting Schemes for the Finite Volume Computation of Incompressible Flow, A Fully—Implicit 2‐D Navier-Stokes Algorithm for Unstructured Grids, Prediction of turbulent oscillatory flows in complex systems, DISCRETE LATTICE BGK BOLTZMANN EQUATION COMPUTATIONS OF TRANSIENT INCOMPRESSIBLE TURBULENT JETS, A multi-objective design optimization strategy as applied to pre-mixed pre-vaporized injection systems for low emission combustors, Simulation of vortex shedding past a square cylinder with different turbulence models, A Navier-Stokes solver for complex three-dimensional turbulent flows adopting non-linear modelling of the Reynolds stresses, 3D unsteady RANS simulation of turbulent flow over bluff body by non‐linear model, Numerical simulation of temperature history during the picture tube panel‐forming process, A depth-averaged mathematical model for the near field of side discharges into open-channel flow, Three‐dimensional numerical simulation of compound meandering open channel flow by the Reynolds stress model, On the consistency of Reynolds stress turbulence closures with hydrodynamic stability theory, Computation of aerodynamic coefficients for a flexible membrane airfoil in turbulent flow: A comparison with classical theory, A robust algorithm for computing fluid flows on highly non-smooth staggered grids, Influence of system parameters on the dynamic behaviour of an LPM combustor: Bifurcation analysis through CFD simulations, Parallel computation of pollutant dispersion in industrial sites, Numerical simulation of turbulent flow in an axisymmetric diffuser with a curved surface centre‐body, Prediction of turbulent fluid flow and heat transfer in a rotating periodical two‐pass square duct, Steady and unsteady computation of a two‐dimensional upwash jet, Computational study of heat transfer in a conjugate turbulent wall jet flow with constant heat flux, Experimental validation of two depth-averaged turbulence models, A new Navier-Stokes inverse method based on mass-averaged tangential velocity for blade design, Analysis combustion of fuel droplets release to the atmosphere using homotopy analysis method, Analogy between turbulent flows in curved pipes and orthogonally rotating pipes, The effect of turbulence on mass transfer rates between inertial polydisperse particles and fluid, A volume-of-fluid method for incompressible free surface flows, Моделирование влияния сдвига ветра на снижение лобового сопротивления энергоэффективного высотного сооружения с использованием дросселирующего эффекта, Calculation of turbulence-driven secondary motion in non-circular ducts, Unnamed Item, Unnamed Item, Computational modeling of a dilute turbulent liquid‐solid flow using a Eulerian‐Lagrangian approach, Unnamed Item, ON EFFICIENCY OF PARALLEL SOLVERS FOR THE BLOOD FLOW THROUGH AORTIC VALVE, An Approximate Roe-Type Riemann Solver for a Class of Realizable Second Order Closures, Computation of isothermal and reacting Flows in turbojet afterburners, GENERATION OF STABLE THERMAL STRATIFICATION IN A PARTIALLY ENCLOSED SPACE DUE TO A ROOM FIRE, The evolution of turbulent bursts: theb—ε model, Двумерная модель для расчета рабочего процесса двигателя с искровым зажиганием, CFD simulations of hydrogen deflagration in slow and fast combustion regime

Cites Work

Retrieved from "https://portal.mardi4nfdi.de/w/index.php?title=Publication:1394006&oldid=13554896"