Numerical simulation of turbulent fluid flow and heat transfer characteristics in heat exchangers fitted with porous media

DOI10.1016/J.IJHEATMASSTRANSFER.2009.02.024MaRDI QIDQ2270945zbMATH OpenOpenAlexFDO

Authors Yue-Tzu Yang, Ming-Lu Hwang

Publication date 29 July 2009

Published in International Journal of Heat and Mass Transfer (Search for Journal in Brave)

Full work available at URL https://doi.org/10.1016/j.ijheatmasstransfer.2009.02.024

zbMATH Keywords

heat transfer enhancementnumerical calculationporous mediaturbulent flow

Mathematics Subject Classification ID

(k)-(varepsilon) modeling in turbulence (76F60) Flows in porous media; filtration; seepage (76S05)

Recommendations

• A macroscopic two-energy equation model for turbulent flow and heat transfer in highly porous media
• Calculation of turbulent flow and heat transfer in a porous-baffled channel
• Simulation of turbulent impinging jet into a cylindrical chamber with and without a porous layer at the bottom
• Thermal enhancement in laminar channel flow with a porous block
• Lattice Boltzmann simulation of heat and fluid flow in 3D cylindrical heat exchanger with porous blocks

Cites work

• Analysis of flow and heat transfer at the interface region of a porous medium
• Analytical solution of non-Darcian forced convection in an annular duct partially filled with a porous medium
• Boundary and inertia effects on flow and heat transfer in porous media
• Constant wall heat flux boundary conditions in porous media under local thermal non-equilibrium conditions
• Convective cooling of a heated obstacle in a channel
• Convective flow and heat transfer in a channel containing multiple heated obstacles
• Effects of a random porosity model on heat transfer performance of porous media
• Enhancement of heat transfer using porous convection-to-radiation converter for laminar flow in a circular duct
• Enhancing heat transfer in parallel-plate channels by using porous inserts.
• Flow and heat transfer control over an external surface using a porous block array arrangement
• Forced convection of non‐Newtonian fluids in porous concentric annuli
• Forced convective heat transfer in porous media.
• scientific article; zbMATH DE number 3825358 (Why is no real title available?)
• Spatial thermal regulation of aluminum foam heat sink using a sintered porous conductive pipe
• Transient non-Darcian forced convection flow in a pipe partially filled with a porous material

Cited in

(20)

• Simulation of turbulent impinging jet into a cylindrical chamber with and without a porous layer at the bottom
• Calculation of turbulent flow and heat transfer in a porous-baffled channel
• A fast running numerical model based on the implementation of volume forces for prediction of pressure drop in a fin tube heat exchanger
• T-RANS simulations of subcritical flow with heat transfer past a circular cylinder surrounded by a thin porous layer
• The effect of the angle of perforation on perforated inserts in a pipe flow for heat transfer analysis
• Unsteady fluid mechanics and heat transfer study in a double-tube air-combustor heat exchanger with porous medium
• Enhancing heat transfer in the core flow by using porous medium insert in a tube
• Effect of variable permeability porous medium inter-connectors on the thermo-hydraulics of heat exchanger modelled as porous media
• Mathematical modeling and computation of three-dimensional, turbulent, convective heat transfer in a heat exchanger with circular pin fins
• Analytical characterization of gaseous slip flow and heat transport through a parallel-plate microchannel with a centered porous substrate
• Numerical flow analysis and heat transfer in smooth and grooved tubes
• Asymptotic analysis of a Hiemenz flow in a low-porosity medium with phase change
• Flow over rectangular porous block in a fixed width channel: influence of porosity and aspect ratio
• Numerical modeling and simulation of particulate fouling on structured heat transfer surfaces using multiphase Eulerian-Lagrangian LES
• The evolution of turbulent micro-vortices and their effect on convection heat transfer in porous media
• Lattice Boltzmann simulation of heat and fluid flow in 3D cylindrical heat exchanger with porous blocks
• Large-eddy simulations (LES) of temperature fluctuations in a mixing tee with/without a porous medium
• Optimization of high-pressure shell-and-tube heat exchanger for syngas cooling in an IGCC
• Influence of magnetohydrodynamics and viscosity ratio on modified tetra-hybrid nanofluid flow under a threshold non-Fourier heat flux framework
• Numerical simulation of fluid flow and convection heat transfer in sintered porous plate channels

This page was built for publication: Numerical simulation of turbulent fluid flow and heat transfer characteristics in heat exchangers fitted with porous media

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2270945)