Publication:2709640
From MaRDI portal
DOI<993::AID-NME164>3.0.CO;2-M 10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-MzbMath0981.74062MaRDI QIDQ2709640
Nicolas Moës, Ted Beltytschko, Shuji Usui, Chandu Parimi
Publication date: 21 March 2002
fracture; crack growth; journal bearing; jointed rock mass; displacement-based Galerkin method; discontinuous approximation; fastener; arbitrary discontinuities in finite elements; branching discontinuities; intersecting discontinuities; non-bonded circular inclusion
Related Items
Structured extended finite element methods for solids defined by implicit surfaces, Brittle fracture in polycrystalline microstructures with the extended finite element method, Analysis and numerical simulation of strong discontinuities in finite strain poroplasticity, A discontinuous shell-interface element for delamination analysis of laminated composite structures, Continuum approach to material failure in strong discontinuity settings, Reproducing kernel element method. III: Generalized enrichment and applications, An extended meshfree method for boundary value problems, Higher order tip enrichment of extended finite element method in thermoelasticity, Application of particle methods to static fracture of reinforced concrete structures, Multiple cohesive crack growth in brittle materials by the extended Voronoi cell finite element model, Fracture toughness from the standpoint of softening hyperelasticity, A state-of-the-art review of the X-FEM for computational fracture mechanics, A sharp interface finite volume method for elliptic equations on Cartesian grids, Vibration analysis of cracked plates using the extended finite element method, A cohesive finite element for quasi-continua, Fracture strength assessment and aging signs detection in human cortical bone using an X-FEM multiple scale approach, Cracks in rubber, X-FEM a good candidate for energy conservation in simulation of brittle dynamic crack propagation, Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach, Extended finite element method for three-dimensional large plasticity deformations on arbitrary interfaces, Proposal of FEM implemented with particle discretization for analysis of failure phenomena, Modelling dendritic solidification with melt convection using the extended finite element method, Stability and robustness issues in numerical modeling of material failure with the strong discontinuity approach, Extrinsic meshfree approximation using asymptotic expansion for interfacial discontinuity of derivative, An extended pressure finite element space for two-phase incompressible flows with surface tension, A two-scale model for fluid flow in an unsaturated porous medium with cohesive cracks, A comparative study on finite element methods for dynamic fracture, Time dependent crack tip enrichment for dynamic crack propagation, In-plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations, A second order virtual node method for elliptic problems with interfaces and irregular domains, An implicit/explicit integration scheme to increase computability of nonlinear material and contact/friction problems, Analysis of fracture in thin shells by overlapping paired elements, An adaptive \(hp\)-version of the multilevel particle-partition of unity method, Multiscale coupling schemes spanning the quantum mechanical, atomistic forcefield, and continuum regimes, A smoothed finite element method for plate analysis, Fitting multidimensional data using gradient penalties and the sparse grid combination technique, A meshfree method based on the local partition of unity for cohesive cracks, Embedded discontinuity finite element method for modeling of localized failure in heterogeneous materials with structured mesh: An alternative to extended finite element method, Extended meshfree methods without branch enrichment for cohesive cracks, Multiscale enrichment based on partition of unity for nonperiodic fields and nonlinear problems, A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics, The intrinsic partition of unity method, On local tracking algorithms for the simulation of three-dimensional discontinuities, A novel Galerkin-like weakform and a superconvergent alpha finite element method (S\(\alpha \)FEM) for mechanics problems using triangular meshes, On a new extended finite element method for dislocations: Core enrichment and nonlinear formulation, Modelling of cohesive crack growth in concrete structures with the extended finite element method, Energy-based modeling of cohesive and cohesionless cracks via X-FEM, Shear-band capturing using a multiscale extended digital image correlation technique, Towards the treatment of boundary conditions for global crack path tracking in three-dimensional brittle fracture, A two-scale finite element relaxation analysis of shear bands in non-convex inelastic solids: Small-strain theory for standard dissipative materials., A mesh-based partition of unity method for discontinuity modeling, Nitsche's method for a transport problem in two-phase incompressible flows, A local space-time discontinuous finite element method, Investigation of mixed-mode stress intensity factors for nonhomogeneous materials using an interaction integral method, A comparative study on finite elements for capturing strong discontinuities: E-FEM vs X-FEM, Interface material failure modeled by the extended finite-element method and level sets, Complementary energy based FE modelling of coupled elasto-plastic and damage behavior for continuum microstructure computations, A finite element method for the simulation of strong and weak discontinuities in solid mechanics, An augmented Lagrangian approach to material discontinuities in meshless methods, Strain localization due to crack--microcrack interactions: X-FEM for a multifield approach, Generalized finite element method for modeling nearly incompressible bimaterial hyperelastic solids, A singular edge-based smoothed finite element method (ES-FEM) for bimaterial interface cracks, Modelling crack growth by level sets in the extended finite element method, Modelling of reinforced-concrete structures providing crack-spacing based on X-FEM, ED-FEM and novel operator split solution procedure, Numerically determined enrichment functions for the extended finite element method and applications to bi-material anisotropic fracture and polycrystals, Finite cover method with multi-cover layers for the analysis of evolving discontinuities in heterogeneous media, On time integration in the XFEM, Identification of random shapes from images through polynomial chaos expansion of random level set functions, An enriched element-failure method (REFM) for delamination analysis of composite structures, Interface handling for three-dimensional higher-order XFEM-computations in fluid-structure interaction, Approximation capability of a bilinear immersed finite element space, An extended finite element method with analytical enrichment for cohesive crack modeling, A stable Lagrange multiplier space for stiff interface conditions within the extended finite element method, On methods for stabilizing constraints over enriched interfaces in elasticity, An X-FEM approach for large sliding contact along discontinuities, Immersed particle method for fluid-structure interaction, A conformal decomposition finite element method for modeling stationary fluid interface problems, Generalized finite element enrichment functions for discontinuous gradient fields, Multiscale modeling of impact on heterogeneous viscoelastic solids containing evolving microcracks, Higher-order XFEM for curved strong and weak discontinuities, Finite deformation formulation for embedded frictional crack with the extended finite element method, A two-scale approach for fluid flow in fractured porous media, Multiscale aggregating discontinuities: A method for circumventing loss of material stability, The enriched space–time finite element method (EST) for simultaneous solution of fluid–structure interaction, A corrected XFEM approximation without problems in blending elements, A new crack tip element for the phantom‐node method with arbitrary cohesive cracks, A level set method for shape and topology optimization of large-displacement compliant mechanisms, Modeling three-dimensional crack propagation-A comparison of crack path tracking strategies, Singularity enrichment for complete sliding contact using the partition of unity finite element method, A contact algorithm for frictional crack propagation with the extended finite element method, A partition-of-unity-based finite element method for level sets, Fast integration and weight function blending in the extended finite element method, Fluid-structure interaction by the discontinuous-Galerkin method for large deformations, Enhanced blending elements for XFEM applied to linear elastic fracture mechanics, A Particle-Partition of Unity Method Part VIII: Hierarchical Enrichment, Crack identification by ‘arrival time’ using XFEM and a genetic algorithm, Cracking node method for dynamic fracture with finite elements, New development in extended finite element modeling of large elasto-plastic deformations, The intrinsic XFEM for two-fluid flows, Numerical analysis of growing crack problems using particle discretization scheme, Non-planar 3D crack growth by the extended finite element and level sets-Part I: Mechanical model, Moving particle finite element method, The extended finite element method (XFEM) for solidification problems, Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and flow of pulverized media, A hybrid extended finite element/level set method for modeling phase transformations, Element‐local level set method for three‐dimensional dynamic crack growth, Efficient finite element simulation of crack propagation using adaptive iterative solvers, SINGULAR ENRICHMENT FINITE ELEMENT METHOD FOR ELASTODYNAMIC CRACK PROPAGATION, A FEM-BASED MESHFREE METHOD WITH A PROBABILISTIC NODE GENERATION TECHNIQUE, A method for multiple crack growth in brittle materials without remeshing, Dynamic fracture with meshfree enriched XFEM
Cites Work
