A tangent modulus method for rate dependent solids
From MaRDI portal
Publication:3313409
DOI10.1016/0045-7949(84)90033-6zbMATH Open0531.73057OpenAlexW1964823458WikidataQ105185015 ScholiaQ105185015MaRDI QIDQ3313409FDOQ3313409
Authors:
Publication date: 1984
Published in: Computers & Structures (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/0045-7949(84)90033-6
Recommendations
- Tangent modulus tensors for elastic-viscoplastic solids
- A generalized forward gradient procedure for rate sensitive constitutive equations
- A semi-implicit integration scheme for rate-dependent and rate-independent plasticity
- Consistent tangent operators for constitutive rate equations
- Consistent tangent operators for rate-independent elastoplasticity
numerical examplessmall strain theoryadaptability to complex constitutive relationsfinite deformation analysesone step forward gradient time integration schemerate dependent solidstangent stiffness type method
Cited In (only showing first 100 items - show all)
- High resolution two-dimensional shear band computations: Imperfections and mesh dependence
- Grain size dependence of polycrystalline plasticity modeling in cylindrical indentation
- Investigation on attitude disturbance control and vibration suppression for fuel-filled flexible spacecraft
- Continuum simulations of directional dependence of crack growth along a copper/sapphire bicrystal interface. I: Experiments and crystal plasticity background. II: Crack tip stress/deformation analysis
- Deformation of plastically compressible hardening-softening-hardening solids
- General solution procedures in elasto/viscoplasticity
- A parallel finite element method for the analysis of crystalline solids
- A finite element method for analyzing localization in rate dependent solids at finite strains
- Modelling of plastic flow localisation and damage development in friction stir welded 6005A aluminium alloy using physics based strain hardening law
- Strain gradient crystal plasticity: Size-dependent deformation of bicrystals
- Indentation of elastically soft and plastically compressible solids
- Slip modes and partitioning of energy during dynamic frictional sliding between identical elastic-viscoplastic solids
- A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear
- Material inertia and size effects in the Charpy V-notch test
- Dynamic crack growth in nonlocal progressively cavitating solid
- Dislocation-based micropolar single crystal plasticity: comparison of multi- and single criterion theories
- Numerical study on void growth in rate and temperature dependent solids
- The finite deformation of rate-dependent polycrystals. II: A comparison of the self-consistent and Taylor methods
- Effect of grain boundary sliding on creep constrained diffusive cavitation
- Rate effects on toughness in elastic nonlinear viscous solids
- A meshfree contact-detection algorithm
- A phenomonological plasticity model with non-normality effects representing observations in crystal plasticity.
- A study of two alternate tangent modulus formulations and attendant implicit algorithms for creep as well as high-strain-rate plasticity
- Symmetry-preserving return mapping algorithms and incrementally extremal paths: A unification of concepts
- Smooth finite strain plasticity with non-local pressure support
- Explicit and implicit methods for shear band modeling at high strain rates
- Finite element analysis of crystalline solids
- Stability and error analysis for time integrators applied to strain-softening materials.
- Ductile failure analyses on massively parallel computers
- A computational framework for analyzing the dynamic response of glassy polymers
- Effects of heterogeneous elasticity coupled to plasticity on stresses and lattice rotations in bicrystals: a field dislocation mechanics viewpoint
- A viscoplastic formulation with elasticity for transient metal forming
- Characteristic material behaviors in conical indentation with friction
- Constitutive relations and their time integration for anisotropic elasto-plastic porous materials
- Mode mixity and nonlinear viscous effects on toughness of interfaces
- Continuity constraints at interfaces and their consequences on the work hardening of metal-matrix composites
- Successively refined models for crack tip plasticity in polymer blends
- A numerical investigation of loss of crack tip constraint in a dynamically loaded ductile specimen.
- Smoothed finite element methods for thermo-mechanical impact problems
- Strain localization analysis of elasto-viscoplastic soil considering structural degradation
- Polymer indentation: numerical analysis and comparison with a spherical cavity model
- Consistent integration of the constitutive equations of Gurson materials under adiabatic conditions
- On the numerical integration of an advanced Gurson model
- The growth and coalescence of ellipsoidal voids in plane strain under combined shear and tension
- Finite element simulations of shear localization in plate impact
- Formulation of implicit finite element methods for multiplicative finite deformation plasticity
- Mesh insensitive formulation for initiation and growth of shear bands using mixed finite elements
- Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior
- Meshfree simulations of spall fracture
- Material rate dependence and mesh-sensitivity in localization problems
- Sensitivity analysis in plane stress elasto-plasticity and elasto-viscoplasticity
- Particle debonding using different yield criteria
- Analysis of uniaxial compression of vertically aligned carbon nanotubes
- A micromechanics based damage model for composite materials
- Plastic spin associated with a non-normality theory of plasticity
- Explicit, fully implicit and forward gradient numerical integration of a hyperelasto-viscoplastic constitutive model for amorphous polymers undergoing finite deformation
- On criteria for dynamic adiabatic shear band propagation
- Meshfree simulations of thermo-mechanical ductile fracture
- Effect of a shear modified Gurson model on damage development in a FSW tensile specimen
- Detonation-driven fracture in thin shell structures: numerical studies
- Frictional sliding modes along an interface between identical elastic plates subject to shear impact loading
- Three-dimensional finite element simulations of ferroelectric polycrystals under electrical and mechanical loading
- Meshfree simulation of failure modes in thin cylinders subjected to combined loads of internal pressure and localized heat
- Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids
- Dynamic neck development in a polymer tube under internal pressure loading
- An analysis of thickness effects in the Izod test
- A constitutive algorithm for rate-dependent crystal plasticity
- Multi-grain analysis versus self-consistent estimates of ferroelectric polycrystals
- Analytical and numerical investigation of strain-hardening viscoplastic thick-walled cylinders under internal pressure by using sequential limit analysis
- Multi-axial electrical switching of a ferroelectric: Theory versus experiment
- An analysis of ductile rupture modes at a crack tip
- Finite deformations of metal cylinders subjected to electromagnetic fields and mechanical forces
- Mean-field homogenization of elasto-viscoplastic composites based on a general incrementally affine linearization method
- Elastic-crystalline-viscoplastic finite element analysis of dynamic deformation of sheet metal
- An overlapping domain decomposition preconditioning method for monolithic solution of shear bands
- A finite element study of the effects of material characteristics and crack tip constraint on dynamic ductile fracture initiation
- Implicit damping iterative algorithm to solve elastoplastic static and dynamic equations
- Sensitivity analysis for failure and damage in dynamically loaded tensile bars
- On the tension necking of copper single crystal specimen under slip deformation mechanism
- Numerical modelling of P/M steel bars subjected to fatigue loading using an extended Gurson model
- Numerical analysis of non-proportional biaxial reverse experiments with a two-surface anisotropic cyclic plasticity-damage approach
- Phase-field description of fracture in NiTi single crystals
- Viscoplastic flow of functional cellular materials with use of peridynamics
- Meshfree radial point interpolation method for analysis of viscoplastic problems
- Analysis on shear band development under large strain torsion of amorphous glassy polymers
- Tangent modulus tensors for elastic-viscoplastic solids
- Effects of lattice incompatibility-induced hardening on the fracture behavior of ductile single crystals
- A simple robust numerical integration algorithm for a power-law visco-plastic model under both high and low rate-sensitivity
- The effect of different forms of strain energy functions in hyperelasticity-based crystal plasticity models on texture evolution and mechanical response of face-centered cubic crystals
- On the optimisation of viscoplastic constitutive modelling using a numerical feedback damping algorithm
- The role of viscous regularization in dynamical problems, strain localization and mesh dependency
- An explicit constitutive algorithm for large-strain, large-strain-rate elastic-viscoplasticity
- Implicit integration procedure for viscoplastic Gurson materials
- Dynamic fracture toughness versus crack tip speed relationship at lower than room temperature for high strength 4340VAR structural steel
- A modified generalized midpoint rule for the integration of rate-dependent thermo-elastic-plastic constitutive equations
- Development of the tangent modulus from the Euler problem to nonsmooth materials
- Macroscopic theory and nonlinear finite element analysis of micromechanics of single crystals at finite strains
- Parallel preconditioners for monolithic solution of shear bands
- Finite element and experimental solutions for the upsetting of pastes
- Constitutive parameter sensitivity in elasto-plasticity
This page was built for publication: A tangent modulus method for rate dependent solids
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q3313409)
