Numerical simulation of dynamic fracture using finite elements with embedded discontinuities
From MaRDI portal
Publication:373357
DOI10.1007/S10704-009-9413-9zbMATH Open1273.74422OpenAlexW2108605549MaRDI QIDQ373357FDOQ373357
Publication date: 22 October 2013
Published in: International Journal of Fracture (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s10704-009-9413-9
Recommendations
- A numerical approach for the simulation of ductile fracture with embedded discontinuities
- Finite elements with embedded strong discontinuities for the modeling of failure in solids
- Three-dimensional finite elements with embedded strong discontinuities for the analysis of solids at failure in the finite deformation range
- An embedded formulation with conforming finite elements to capture strong discontinuities
- New finite elements with embedded strong discontinuities in the finite deformation range
Brittle fracture (74R10) Finite element methods applied to problems in solid mechanics (74S05) Numerical approximation of solutions of dynamical problems in solid mechanics (74H15)
Cites Work
- Elastic crack growth in finite elements with minimal remeshing
- A finite element method for crack growth without remeshing
- Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis
- Title not available (Why is that?)
- A generalized finite element method for the simulation of three-dimensional dynamic crack propagation.
- The simulation of dynamic crack propagation using the cohesive segments method
- A finite element method for the simulation of strong and weak discontinuities in solid mechanics
- A method for dynamic crack and shear band propagation with phantom nodes
- Numerical simulations of fast crack growth in brittle solids
- Computational modelling of impact damage in brittle materials
- A new method for modelling cohesive cracks using finite elements
- Title not available (Why is that?)
- Analysis of a brittle-ductile transition under dynamic shear loading
- On criteria for dynamic adiabatic shear band propagation
- Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition.
- An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids
- Modeling fracture in Mindlin-Reissner plates with the extended finite element method
- A Continuum Model for Void Nucleation by Inclusion Debonding
- Numerical simulation of dynamic fracture using finite elements with embedded discontinuities
- Automated 3-D crack growth simulation
- A high-order generalized FEM for through-the-thickness branched cracks
- Extended meshfree methods without branch enrichment for cohesive cracks
- An analysis of strong discontinuities in multiplicative finite strain plasticity and their relation with the numerical simulation of strain localization in solids
- DYNAMIC FRACTURE USING ELEMENT-FREE GALERKIN METHODS
- Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment
- Discontinuous modelling of shear bands using adaptive meshfree methods
- Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds
- Finite element methods for the multi-scale modeling of softening hinge lines in plates at failure
- A comparative study on finite elements for capturing strong discontinuities: E-FEM vs X-FEM
- Finite element methods for the analysis of softening plastic hinges in beams and frames
- New finite elements with embedded strong discontinuities in the finite deformation range
- Finite elements with displacement interpolated embedded localization lines insensitive to mesh size and distortions
- Two-scale shear band evolution by local partition of unity
- Extrinsic cohesive modelling of dynamic fracture and microbranching instability in brittle materials
- Finite elements with embedded strong discontinuities for the modeling of failure in solids
- Dynamic crack propagation with cohesive elements: a methodology to address mesh dependency
- Modelling and simulation of high‐speed machining
- On the characterization of localized solutions in inelastic solids: An analysis of wave propagation in a softening bar
- On the failure mode transitions in polycarbonate under dynamic mixed-mode loading
Cited In (51)
- Dynamic brittle fracture with eigenerosion enhanced material point method
- Dynamic cracking simulation by the nonlocal macro-meso-scale damage model for isotropic materials
- Mesh refinement strategies without mapping of nonlinear solutions for the generalized and standard FEM analysis of 3-D cohesive fractures
- Crack propagation in dynamics by embedded strong discontinuity approach: enhanced solid versus discrete lattice model
- A phase field model of dynamic fracture: Robust field updates for the analysis of complex crack patterns
- A marching cubes based failure surface propagation concept for three-dimensional finite elements with non-planar embedded strong discontinuities of higher-order kinematics
- An exact Riemann solver for wave propagation in arbitrary anisotropic elastic media with fluid coupling
- Time dependent crack tip enrichment for dynamic crack propagation
- Adaptive dynamic cohesive fracture simulation using nodal perturbation and edge-swap operators
- A scalable 3D fracture and fragmentation algorithm based on a hybrid, discontinuous Galerkin, cohesive element method
- Explicit dynamics with a non-local damage model using the thick level set approach
- Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials
- Adaptive mesh refinement and coarsening for cohesive zone modeling of dynamic fracture
- A fast weakly intrusive multiscale method in explicit dynamics
- Finite element formulation with embedded weak discontinuities for strain localization under dynamic conditions
- Dynamic Fracture Modeling of Impact Test Specimens by the Polygon Scaled Boundary Finite Element Method
- A consistent finite element approach for dynamic crack propagation with explicit time integration
- A spatio-temporal adaptive phase-field fracture method
- Fracture and impulse based finite-discrete element modeling of fragmentation
- Three-dimensional finite elements with embedded strong discontinuities for the analysis of solids at failure in the finite deformation range
- The extended finite element method with new crack-tip enrichment functions for an interface crack between two dissimilar piezoelectric materials
- A continuous-discontinuous hybrid boundary node method for solving stress intensity factor
- A numerical study of \(T\)-stress in dynamically loaded fracture specimens
- Algebraic dynamic multilevel method for embedded discrete fracture model (F-ADM)
- Three-dimensional finite elements with embedded strong discontinuities to model failure in electromechanical coupled materials
- A strong discontinuity approach on multiple levels to model solids at failure
- Computational methods for fracture in brittle and quasi-brittle solids: state-of-the-art review and future perspectives
- Parallel simulations of dynamic fracture using extrinsic cohesive elements
- DP-MPM: domain partitioning material point method for evolving multi-body thermal-mechanical contacts during dynamic fracture and fragmentation
- A cracked zone clustering method for discrete fracture with minimal enhanced degrees of freedom
- Crack propagation simulation without crack tracking algorithm: embedded discontinuity formulation with incompatible modes
- Energy minimization versus criteria-based methods in discrete cohesive fracture simulations
- The reduced basis method in all-electron calculations with finite elements
- Toughening effect of ferroelectric ceramics induced by domain switching and dislocations
- New finite elements with embedded strong discontinuities for the modeling of failure in electromechanical coupled solids
- A meshfree continuous-discontinuous approach for the ductile fracture modeling in explicit dynamics analysis
- Modelling interfacial cracking with non-matching cohesive interface elements
- Numerical simulation of dynamic fracture using finite elements with embedded discontinuities
- Title not available (Why is that?)
- Simulation of crack-propagation using embedded discontinuities
- Modeling dynamic cracks initiation and propagation with the local to global approach
- Dynamic fracture with meshfree enriched XFEM
- A new generalized finite element method for two-scale simulations of propagating cohesive fractures in 3-D
- Multiscale modelling framework for the fracture of thin brittle polycrystalline films: application to polysilicon
- Numerical simulation of dynamic elasto visco-plastic fracture using moving finite element method
- A coupled two-scale computational scheme for the failure of periodic quasi-brittle thin planar shells and its application to masonry
- Fragmentation algorithm for finite element failure simulation and analysis
- Elastic damage to crack transition in a coupled non-local implicit discontinuous Galerkin/extrinsic cohesive law framework
- Modeling dynamic fracture of solids with a phase-field regularized cohesive zone model
- An embedded formulation with conforming finite elements to capture strong discontinuities
- A damage to crack transition model accounting for stress triaxiality formulated in a hybrid nonlocal implicit discontinuous Galerkin-cohesive band model framework
This page was built for publication: Numerical simulation of dynamic fracture using finite elements with embedded discontinuities
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q373357)
