A non-conforming element for stress analysis
From MaRDI portal
Publication:4105892
DOI10.1002/nme.1620100602zbMath0338.73041OpenAlexW1980950607MaRDI QIDQ4105892
Peter J. Beresford, Robert L. Taylor, Edward L. Wilson
Publication date: 1976
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1002/nme.1620100602
Related Items
A set of pathological test to validate new finite elements, A triangular membrane element with rotational degrees of freedom, A selective enhanced FE-method for phase field modeling of ferroelectric materials, A finite element method for localized failure analysis, Quasi-Wilson nonconforming element approximation for nonlinear dual phase lagging heat conduction equations, A stabilized one-point integrated mixed formulation for finite element and meshfree methods in modeling nearly incompressible materials, New improved hourglass control for bilinear and trilinear elements in anisotropic linear elasticity, A ``FE-meshfree QUAD4 element based on partition of unity, Nonlinear formulations of a four-node quasi-conforming shell element, Assumed stress formulation of high order quadrilateral elements with an improved in-plane bending behaviour, Generalized mixed finite element method for 3D elasticity problems, A study on the approximation power of NURBS and the significance of exact geometry in isogeometric pre-buckling analyses of shells, Formulating an effective generalized four-sided element, An effective membrane element based on analytical solution, A generalized beta finite element method with coupled smoothing techniques for solid mechanics, New formulation of quasi-conforming method: a simple membrane element for analysis of planar problems, An efficient 3D enhanced strain element with Taylor expansion of the shape functions, On enhanced strain methods for small and finite deformations of solids, Superconvergence analysis and extrapolation of quasi-Wilson nonconforming finite element method for nonlinear Sobolev equations, Enhanced lower-order element formulations for large strains, Wilson's element for the Reissner-Mindlin plate, Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems, A novel versatile multilayer hybrid stress solid-shell element, A `FE-meshfree' TRIA3 element based on partition of unity for linear and geometry nonlinear analyses, A regularized dual mixed element for plane elasticity. Implementation and performance of the BDM element, Stefan problem through extended finite elements: review and further investigations, A note on enhanced strain methods for large deformations, Four-node generalized conforming membrane elements with drilling DOFs using quadrilateral area coordinate methods, A combined XFEM-damage mechanics approach for concrete crack propagation, Sur la convergence des méthodes d'éléments finis nonconformes pour des problèmes linéaires de coques minces. (On the convergence of nonconforming finite element method for linear thin shell problems), The four-noded quadrilateral with a \(2\times 1\) integration rule: Application to plates and other problems, An enhanced finite element technique for diffuse phase transition, The interphase finite element, Optimal solid shells for nonlinear analyses of multilayer composites. I: Statics., A scaled boundary finite element formulation with bubble functions for elasto-static analyses of functionally graded materials, A non linear corotational 4-node plane element, Convergence of the nonconforming Wilson element for arbitrary quadrilateral meshes, A study of optimal membrane triangles with drilling freedoms., A discontinuous Galerkin formulation of a model of gradient plasticity at finite strains, Shape-free finite element method: another way between mesh and mesh-free methods, Optimization methods applied to material and flextensional actuator design using the homogenization method, Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: Theoretical and computational analysis, Multilevel methods for Wilson element approximation of elasticity problem, Anisotropic finite elastoplastic analysis of shells: Simulation of earing in deep-drawing of single- and polycrystalline sheets by Taylor-type micro-to-macro transitions., Several treatments on nonconforming element failed in the strict patch test, 8- and 12-node plane hybrid stress-function elements immune to severely distorted mesh containing elements with concave shapes, Uniform convergence and a posteriori error estimation for assumed stress hybrid finite element methods, A partition-of-unity based `FE-meshfree' QUAD4 element with radial-polynomial basis functions for static analyses, On shape sensitivity and patch test requirements of incompatible quadrilateral elements in physical coordinates, The MITC3+ shell element enriched in membrane displacements by interpolation covers, A curvilinear spectral overlay method for high gradient problems, Non-conforming finite-element formulation for cardiac electrophysiology: an effective approach to reduce the computation time of heart simulations without compromising accuracy, Improved nine-node shell element MITC9i with reduced distortion sensitivity, A virtual element method for transversely isotropic hyperelasticity, An asymptotic analysis of composite beams with kinematically corrected end effects, Efficient hybrid/mixed elements using admissible matrix formulation, Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping schemes of the infinitesimal theory, A unified approach to mixed finite element methods: Application to in- plane problems, B free, Optimal order error estimates of a modified nonconforming rotated \(Q_1\) IFEM for interface problems, Quadrilateral mesh, Nonconforming finite element analysis for Poisson eigenvalue problem, Deep learned finite elements, Non-convolutional second-order complex-frequency-shifted perfectly matched layers for transient elastic wave propagation, Highly accurate symplectic element based on two variational principles, A simple and robust quadrilateral non-conforming element with a special 5-point quadrature, Stability of incompressible formulations enriched with X-FEM, `FE-meshfree' QUAD4 element for free-vibration analysis, Supernatural QUAD4: a template formulation, Mixed finite element methods - reduced and selective integration techniques: a unification of concepts, Locking alleviation in the large displacement analysis of beam elements: the strain split method, Improved equilibrium finite elements, A note on convergence of V-cycle nonconforming multigrid methods, One point quadrature shell elements: a study on convergence and patch tests, A macro-element for incompressible finite deformations based on a volume-averaged deformation gradient, \(P_1\)-nonconforming triangular finite element method for elliptic and parabolic interface problems, A finite element method for analyzing localization in rate dependent solids at finite strains, On finite element formulations for nearly incompressible linear elasticity, A novel FEM by scaling the gradient of strains with factor \(\alpha\) (\(\alpha\)FEM), On an equivalence between a discontinuous Galerkin method and reduced integration with hourglass stabilization for finite elasticity, A stabilised mixed meshfree method for incompressible media: application to linear elasticity and Stokes flow, An algorithm based on incompatible modes for the global tracking of strong discontinuities in shear localization analyses, Enhanced assumed strain elements and locking in membrane problems, On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications, Nonlinear versions of flexurally superconvergent elements, Incompatible bubbles: a non-conforming finite element formulation for linear elasticity, Quadrilateral membrane element family formulated by the quadrilateral area coordinate method, Extrapolated fields in the formulation of the assumed strain elements. I: Two-dimensional problems., The first locking-free plane elastic finite element: Historia mathematica, Data-driven multiscale method for composite plates, Extrapolated fields in the formulation of the assumed strain elements. II: Three-dimensional problems, Development and testing of stable, invariant, isoparametric curvilinear 2- and 3-D hybrid-stress elements, Nonconforming quasi-Wilson finite element method for 2D multi-term time fractional diffusion-wave equation on regular and anisotropic meshes, Improvement on the 10-node tetrahedral element for three-dimensional problems, A consolidation of various approaches in developing naturally based quadrilaterals, Nonconforming finite element methods, A generalized conforming isoparametric element, Efficient implementation of quadrilaterals with high coarse-mesh accuracy, A convergence condition for the quadrilateral Wilson element, Self-updated four-node finite element using deep learning, EQUIVALENCE BETWEEN ENHANCED ASSUMED STRAIN METHOD AND ASSUMED STRESS HYBRID METHOD BASED ON THE HELLINGER-REISSNER PRINCIPLE, A CO-ROTATIONAL FORMULATION FOR 2-D CONTINUA INCLUDING INCOMPATIBLE MODES, A 3D brick element based on Hu-Washizu variational principle for mesh distortion, Mixed-enhanced formulation for geometrically linear axisymmetric problems, Assumed strain stabilization of the eight node hexahedral element, A mixed solid-shell element for the analysis of laminated composites, Four-node mixed Hu-Washizu shell element with drilling rotation, A FINITE ELEMENT FORMULATION FOR 3-D CONTINUA USING THE CO-ROTATIONAL TECHNIQUE, A quadratic plane triangular element immune to quadratic mesh distortions under quadratic displacement fields, Unnamed Item, Enhanced Allman quadrilateral for finite drilling rotations, A meshless integral method based on regularized boundary integral equation, A novel alpha finite element method (\(\alpha \)FEM) for exact solution to mechanics problems using triangular and tetrahedral elements, Hexahedral volume coordinate method (HVCM) and improvements on 3D Wilson hexahedral element, A hybrid Trefftz plane elasticity element with drilling degrees of freedom, Conditions for equivalence between the Hu-Washizu and related formulations, and computational behavior in the incompressible limit, Theoretical basis and general optimal formulations of isoparametric generalized hybrid/mixed element model for improved stress analysis, The patch test conditions and some multivariable finite element formulations, New stress assumption for hybrid stress elements and refined four-node plane and eight-node brick elements, A hybrid-stress element based on Hamilton principle, Incompatible modes with Cartesian coordinates and application in quadrilateral finite element formulation, Analysis of multibody systems experiencing large elastic deformations, On immunizing five-beta hybrid-stress element models from ?trapezoidal locking? in practical analyses, On the stabilization of the rectangular 4‐node quadrilateral element, Generalized modal element method. I: Theory and its application to eight-node asymmetric and symmetric solid elements in linear analysis, A stabilized mixed implicit material point method for non-linear incompressible solid mechanics, Geometrically non-linear generalized hybrid element and refined element method of non-conforming modes, Review of the strain-based formulation for analysis of plane structures Part II: Evaluation of the numerical performance, An optimal versatile partial hybrid stress solid-shell element for the analysis of multilayer composites, Enrichment of linear hexahedral finite elements using rotations of a virtual space fiber, Assumed strain nodally integrated hexahedral finite element formulation for elastoplastic applications, A fast weakly intrusive multiscale method in explicit dynamics, Two 8‐node quadrilateral unsymmetric elements with different incompatible modes immune to severe distortion, An unsymmetric 4-node, 8-DOF plane membrane element perfectly breaking through MacNeal's theorem, Unsymmetric extensions of Wilson's incompatible four‐node quadrilateral and eight‐node hexahedral elements, A new reduced integration solid-shell element based on EAS and ANS with hourglass stabilization, A 3D Cosserat point element (CPE) for nonlinear orthotropic solids: Generalization for an initially distorted mesh and an arbitrary orientation of material orthotropy, Hourglassing‐ and locking‐free mesh distortion insensitive Petrov–Galerkin EAS element for large deformation solid mechanics, An improved FE expansion for micropolar localization analysis, Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity, Nonconforming modified quasi-Wilson finite element method for convection-diffusion-reaction equation, Variational principles for non-conforming finite element methods, An unsymmetric 8-node hexahedral solid-shell element based on ANS and incompatible concepts for thin shell analysis, An implementation of mixed enhanced finite elements with strains assumed in Cartesian and natural element coordinates using sparse B (overline)‐matrices, Unnamed Item, Composite material design of two-dimensional structures using the homogenization design method, A solid-beam finite element and non-linear constitutive modelling, FE plane stress analysis incorporating arbitrary 3D large strain constitutive models, On the formulation of enhanced strain finite elements in finite deformations, Two- and three-dimensional transition element families for adaptive refinement analysis of elasticity problems, Reduction of excessive energy in the four-noded membrane quadrilateral element. II: Near incompressibility and \(J_{2}\) plasticity, A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I-geometrically linear applications, On the Equivalent of Mixed Element Formulations and the Concept of Reduced Integration in Large Deformation Problems, A hybrid-Trefftz formulation for plane elasticity with selective enrichment of the approximations, A reduced integration solid-shell finite element based on the EAS and the ANS concept-Large deformation problems, A variationally consistent αFEM (VCαFEM) for solution bounds and nearly exact solution to solid mechanics problems using quadrilateral elements, Reliable second-order hexahedral elements for explicit methods in nonlinear solid dynamics, A new volumetric and shear locking‐free 3D enhanced strain element, Refined hybrid degenerated shell element for geometrically non-linear analysis, The equivalent parallelogram and parallelepiped, and their application to stabilized finite elements in two and three dimensions., An assumed strain triangular curved solid shell element formulation for analysis of plates and shells undergoing finite rotations, Time integration in the context of energy control and locking-free finite elements, Exact integrations of two-dimensional high-order discontinuous boundary elements of elastostatics problems, The best of the enhanced displacement nonconforming plate/shell elements, Unnamed Item, Stabilization of bi‐linear mixed finite elements for tetrahedra with enhanced interpolation using volume and area bubble functions, Improved four-node Hellinger-Reissner elements based on skew coordinates, Reduction of excessive energy in the four-noded membrane quadrilateral element. I: Linear theory -- compressible materials, A further study on incompatible models: Revise-stiffness approach and completeness of trial functions, A generalized layerwise finite element for multi-layer damping treatments, Extension of unsymmetric finite elements US‐QUAD8 and US‐HEXA20 for geometric nonlinear analyses, A PU-BASED 4-NODE QUADRATIC TETRAHEDON AND LINEAR DEPENDENCES ELIMINATION IN THREE-DIMENSIONS, New enhanced strain elements for incompressible problems, Solid finite elements through three decades., Recent advances in models for thermal oxidation of silicon, On superconvergence of isoparametric bilinear finite elements, Eight-node shell element based on incompatible modes, New a posteriori error estimate and quasi-optimal convergence of the adaptive nonconforming Wilson element, A FORMULATION OF THE QS6 ELEMENT FOR LARGE ELASTIC DEFORMATIONS, Quadrilateral membrane elements with analytical element stiffness matrices formulated by the new quadrilateral area coordinate method (QACM-II), A new stabilization technique for finite elements in non-linear elasticity, Some low‐order quadrilateral elements based on novel integration rules, A systematic construction of B-bar functions for linear and non-linear mixed-enhanced finite elements for plane elasticity problems, A New, Efficient 8-Node Serendipity Element with Explicit and Assumed Strains Formulations, A 12‐node hybrid stress brick element for beam/column analysis, Unnamed Item, New mixed formulations for problems in elasticity, An assessment of the average nodal volume formulation for the analysis of nearly incompressible solids under finite strains, Further results for enhanced strain methods with isoparametric elements, A multiscale finite element formulation for axisymmetric elastoplasticity with volumetric locking, Unnamed Item, New convergence analysis for assumed stress hybrid quadrilateral finite element method
