Fictitious domain finite element methods using cut elements. II: A stabilized Nitsche method
From MaRDI portal
Publication:412303
DOI10.1016/J.APNUM.2011.01.008zbMATH Open1316.65099OpenAlexW2020152794MaRDI QIDQ412303FDOQ412303
Authors: Erik Burman, Peter Hansbo 
Publication date: 4 May 2012
Published in: Applied Numerical Mathematics (Search for Journal in Brave)
Full work available at URL: https://discovery.ucl.ac.uk/id/eprint/1384749/
Recommendations
- Fictitious domain finite element methods using cut elements. I: A stabilized Lagrange multiplier method
- Fictitious domain methods using cut elements. III: A stabilized Nitsche method for Stokes' problem
- Fictitious domain method with boundary value correction using penalty-free Nitsche method
- A stabilized Nitsche fictitious domain method for the Stokes problem
- A stabilized cut finite element method for the three field Stokes problem
Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs (65N30) Fictitious domain methods for boundary value problems involving PDEs (65N85)
Cites Work
- Theory and practice of finite elements.
- Title not available (Why is that?)
- An unfitted finite element method, based on Nitsche's method, for elliptic interface problems.
- Über ein Variationsprinzip zur Lösung von Dirichlet-Problemen bei Verwendung von Teilräumen, die keinen Randbedingungen unterworfen sind. (On a variational principle for solving Dirichlet problems less boundary conditions using subspaces)
- Fictitious domain finite element methods using cut elements. I: A stabilized Lagrange multiplier method
- A Nitsche extended finite element method for incompressible elasticity with discontinuous modulus of elasticity
- Nitsche's method for interface problems in computa-tional mechanics
Cited In (only showing first 100 items - show all)
- A reduced order model for a stable embedded boundary parametrized Cahn-Hilliard phase-field system based on cut finite elements
- The aggregated unfitted finite element method for elliptic problems
- Corotational cut finite element method for real-time surgical simulation: application to needle insertion simulation
- A stabilized cut discontinuous Galerkin framework for elliptic boundary value and interface problems
- A stabilized finite element method for enforcing stiff anisotropic cohesive laws using interface elements
- Consistent discretization of higher-order interface models for thin layers and elastic material surfaces, enabled by isogeometric cut-cell methods
- Cut topology optimization for linear elasticity with coupling to parametric nondesign domain regions
- Preconditioning immersed isogeometric finite element methods with application to flow problems
- Graded parametric CutFEM and CutIGA for elliptic boundary value problems in domains with corners
- Isogeometric analysis on V-reps: first results
- Weak impositions of Dirichlet boundary conditions in solid mechanics: a critique of current approaches and extension to partially prescribed boundaries
- Analysis of the shifted boundary method for the Stokes problem
- A note on the stability parameter in Nitsche's method for unfitted boundary value problems
- On \(hp\)-streamline diffusion and Nitsche schemes for the relativistic Vlasov-Maxwell system
- A numerical method for finite-strain mechanochemistry with localised chemical reactions treated using a Nitsche approach
- The embedded isogeometric Kirchhoff-Love shell: from design to shape optimization of non-conforming stiffened multipatch structures
- Weak imposition of frictionless contact constraints on automatically recovered high-order, embedded interfaces using the finite cell method
- A cut finite element method for the Bernoulli free boundary value problem
- CutFEM topology optimization of 3D laminar incompressible flow problems
- A Nitsche cut finite element method for the Oseen problem with general Navier boundary conditions
- Embedded shell finite elements: solid-shell interaction, surface locking, and application to image-based bio-structures
- A cut finite element method for elliptic bulk problems with embedded surfaces
- An Unfitted Hybrid High-Order Method with Cell Agglomeration for Elliptic Interface Problems
- Title not available (Why is that?)
- A residual-driven local iterative corrector scheme for the multiscale finite element method
- The second-generation shifted boundary method and its numerical analysis
- Multigrid solvers for immersed finite element methods and immersed isogeometric analysis
- Hybridized CutFEM for Elliptic Interface Problems
- A NURBS-based finite cell method for structural topology optimization under geometric constraints
- A cut finite-element method for fracture and contact problems in large-deformation solid mechanics
- A Minimal Stabilization Procedure for Isogeometric Methods on Trimmed Geometries
- A cut finite element method for a model of pressure in fractured media
- Variationally derived interface stabilization for discrete multiphase flows and relation with the ghost-penalty method
- An adaptive bubble method for structural shape and topology optimization
- CutFEM based on extended finite element spaces
- A cut finite element method for incompressible two-phase Navier-Stokes flows
- An unconditionally stable semi-implicit CutFEM for an interaction problem between an elastic membrane and an incompressible fluid
- A cut finite element method with boundary value correction
- A Nitsche-based cut finite element method for the coupling of incompressible fluid flow with poroelasticity
- Mixed Aggregated Finite Element Methods for the Unfitted Discretization of the Stokes Problem
- Inf-sup stability of geometrically unfitted Stokes finite elements
- A fictitious domain method for frictionless contact problems in elasticity using Nitsche's method
- High-order numerical methods for 2D parabolic problems in single and composite domains
- Adaptive isogeometric analysis on two-dimensional trimmed domains based on a hierarchical approach
- Convergence analysis of an unfitted mesh semi-implicit coupling scheme for incompressible fluid-structure interaction
- Linking ghost penalty and aggregated unfitted methods
- Shape optimization using the cut finite element method
- A stabilized finite element method for a fictitious domain problem allowing small inclusions
- Stabilized extended finite elements for the approximation of saddle point problems with unfitted interfaces
- An implicit boundary finite element method with extension to frictional sliding boundary conditions and elasto-plastic analyses
- Analysis of backward Euler/extended finite element discretization of parabolic problems with moving interfaces
- Gradient recovery for elliptic interface problem. III: Nitsche's method
- A new formulation for air-blast fluid-structure interaction using an immersed approach. I: Basic methodology and FEM-based simulations
- An extended algebraic variational multiscale-multigrid-multifractal method (XAVM\(^4\)) for large-eddy simulation of turbulent two-phase flow
- Stabilized CutFEM for the convection problem on surfaces
- A Nitsche-based formulation for fluid-structure interactions with contact
- An Eulerian finite element method for PDEs in time-dependent domains
- Cut finite element methods for elliptic problems on multipatch parametric surfaces
- A stabilized cut finite element method for the three field Stokes problem
- CutFEM method for Stefan-Signorini problems with application in pulsed laser ablation
- Unfitted finite element methods for the heat conduction in composite media with contact resistance
- An unfitted finite element method by direct extension for elliptic problems on domains with curved boundaries and interfaces
- Selective enrichment of moment fitting and application to cut finite elements and cells
- Error analysis of symmetric linear/bilinear partially penalized immersed finite element methods for Helmholtz interface problems
- Analysis of an unfitted mixed finite element method for a class of quasi-Newtonian Stokes flow
- A diffuse interface box method for elliptic problems
- Error Analysis for a Parabolic PDE Model Problem on a Coupled Moving Domain in a Fully Eulerian Framework
- Geometrically Higher Order Unfitted Space-Time Methods for PDEs on Moving Domains
- A Nitsche stabilized finite element method: application for heat and mass transfer and fluid-structure interaction
- Ambiguous phase assignment of discretized 3D geometries in topology optimization
- Higher-order conformal decomposition FEM (CDFEM)
- Concurrent multiscale analysis without meshing: microscale representation with CutFEM and micro/macro model blending
- Topology-preserving scan-based immersed isogeometric analysis
- Random geometries for optimal control PDE problems based on fictitious domain FEMs and cut elements
- CutFEM without cutting the mesh cells: a new way to impose Dirichlet and Neumann boundary conditions on unfitted meshes
- High Order Cut Discontinuous Galerkin Methods for Hyperbolic Conservation Laws in One Space Dimension
- ℎ𝑝-version discontinuous Galerkin methods on essentially arbitrarily-shaped elements
- Stabilized Cut Discontinuous Galerkin Methods for Advection-Reaction Problems
- Unfitted finite element method for fully coupled poroelasticity with stabilization
- Equal higher order analysis of an unfitted discontinuous Galerkin method for Stokes flow systems
- A stable interface-enriched formulation for immersed domains with strong enforcement of essential boundary conditions
- Shape optimization of a linearly elastic rolling structure under unilateral contact using Nitsche's method and cut finite elements
- Error analysis of Nitsche's mortar method
- Solving elliptic PDE's on domains with curved boundaries with an immersed penalized boundary method
- $\phi$-FEM: A Finite Element Method on Domains Defined by Level-Sets
- High-order cut discontinuous Galerkin methods with local time stepping for acoustics
- A stabilized finite element method for the Stokes-Stokes coupling interface problem
- Improvement in 3D topology optimization with h‐adaptive refinement using the Cartesian grid Finite Element Method
- A new approach for nonmatching interface construction by the method of localized Lagrange multipliers
- Nitsche's method as a variational multiscale formulation and a resulting boundary layer fine-scale model
- Explicit Time Stepping for the Wave Equation using CutFEM with Discrete Extension
- Higher order cut finite elements for the wave equation
- On the use of stabilization techniques in the Cartesian grid finite element method framework for iterative solvers
- An interface penalty parameter free nonconforming cut finite element method for elliptic interface problems
- Corrected finite element methods on unfitted meshes for Stokes moving interface problem
- An arbitrarily high order unfitted finite element method for elliptic interface problems with automatic mesh generation
- An optimal adaptive Fictitious Domain Method
- High-order cut finite elements for the elastic wave equation
- An unfitted finite element method for two-phase Stokes problems with slip between phases
- High order discontinuous cut finite element methods for linear hyperbolic conservation laws with an interface
This page was built for publication: Fictitious domain finite element methods using cut elements. II: A stabilized Nitsche method
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q412303)
