A theory of plasticity for carbon nanotube reinforced composites

DOI10.1016/J.IJPLAS.2010.08.006zbMATH Open1426.74086OpenAlexW2070131670MaRDI QIDQ415319FDOQ415319

Authors: Pallab Barai, George J. Weng 

Publication date: 8 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.08.006

Recommendations

• A rigid-fiber-based boundary element model for strength simulation of carbon nanotube reinforced composites
• Multiscale modeling of CNT-based nanocomposites with soft/hard interphase effects
• A shear-lag model for carbon nanotube-reinforced polymer composites
• Numerical model for composite material with polymer matrix reinforced by carbon nanotubes
• A study on the plastic properties of unidirectional nanocomposites with interface energy effects

zbMATH Keywords

plasticitycarbon nanotubesnanocompositesCNT agglomeration and interface effectstwo-scale homogenization

Mathematics Subject Classification ID

Composite and mixture properties (74E30) Micromechanics of solids (74M25) Effective constitutive equations in solid mechanics (74Q15) Plastic materials, materials of stress-rate and internal-variable type (74C99)

Cites Work

• Homogenization of elastic-viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes
• Solutions for effective shear properties in three phase sphere and cylinder models
• Size-dependent elastic properties of a single-walled carbon nanotube via a molecular mechanics model.
• The determination of the elastic field of an ellipsoidal inclusion, and related problems
• A structural mechanics approach for the analysis of carbon nanotubes
• Transformation field analysis of inelastic composite materials
• The theoretical connection between Mori-Tanaka's theory and the Hashin- Shtrikman-Walpole bounds
• On the application of Mori-Tanaka's theory involving transversely isotropic spheroidal inclusions
• Elastic Behavior of Composite Materials: Theoretical Foundations
• Variational Principles for Inhomogeneous Non-linear Media
• Title not available (Why is that?)
• Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: Synthesis, experiment, and constitutive modeling
• Explicit evaluation of Willis' bounds with ellipsoidal inclusions
• Continuum micro-mechanics of elastoplastic polycrystals
• Bounds and self-consistent estimates for creep of polycrystalline materials
• On the overall elastic moduli of composite materials
• The effective mechanical properties of nonlinear isotropic composites
• An atomistic-based finite-deformation shell theory for single-wall carbon nanotubes
• An atomistic-based continuum theory for carbon nanotubes: analysis of fracture nucleation
• Title not available (Why is that?)
• Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions
• An extension of the self-consistent scheme to plastically-flowing polycrystals
• An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals
• A cohesive law for carbon nanotube/polymer interfaces based on the van der Waals force
• A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials
• Eshelby Tensor for an Elastic Inclusion With Slightly Weakened Interface
• A Unified, Self-Consistent Theory for the Plastic-Creep Deformation of Metals
• Can a single-wall carbon nanotube be modeled as a thin shell?
• An enhanced affine formulation and the corresponding numerical algorithms for the mean-field homogenization of elasto-viscoplastic composites
• The elastic modulus of single-wall carbon nanotubes: a continuum analysis incorporating interatomic potentials.
• A theory of compressive yield strength of nano-grained ceramics
• A secant-viscosity composite model for the strain-rate sensitivity of nanocrystalline materials
• Nanocrystalline aluminum and iron: mechanical behavior at quasi-static and high strain rates, and constitutive modeling
• Field fluctuations in multicomponent mixtures
• Overall properties of elastic-viscoplastic periodic composites
• Composite plasticity based on matrix average second order stress moment
• Mechanical response and modeling of fully compacted nanocrystalline iron and copper
• Mechanically alloyed nanocrystalline iron and copper mixture: Behavior and constitutive modeling over a wide range of strain rates
• Determination of effective thermomechanical parameters of a mixture of two elastothermoviscoplastic constituents
• The Mori-Tanaka method for composite materials with nonlinear interface debonding
• Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers
• A Theory of Plasticity for Porous Materials and Particle-Reinforced Composites
• A method of plasticity for general aligned spheroidal void or fiber-reinforced composites
• Defect nucleation in carbon nanotubes under tension and torsion: Stone--Wales transformation
• The overall elastoplastic stress-strain relations of dual-phase metals
• Impact of the grain size distribution on the yield stress of heterogeneous materials
• Mechanics of creep resistance in nanocrystalline solids
• The competition of grain size and porosity in the viscoplastic response of nanocrystalline solids
• Stone-Wales transformation: precursor of fracture in carbon nanotubes

Cited In (19)

• Effects of the nanofiller addition on the band gap and complex dispersion curve of phononic crystals
• Theoretical study of the effective modulus of a composite considering the orientation distribution of the fillers and the interfacial damage
• Modified Eshelby tensor for an anisotropic matrix with interfacial damage
• Effect of hyperbolic heat conduction on the linear and nonlinear vibration of CNT reinforced size-dependent functionally graded microbeams
• Biography of the Prager Medalist: Professor George Weng
• On the overall viscoelastic behavior of graphene/polymer nanocomposites with imperfect interface
• The effect of agglomeration and slightly weakened CNT-matrix interface on free vibration response of cylindrical nanocomposites
• A revisiting of the elasticity solution for a transversely isotropic functionally graded thick-walled tube based on the Mori-Tanaka method
• Tailoring the frequency-dependent electrical conductivity and dielectric permittivity of CNT-polymer nanocomposites with nanosized particles
• On the homogenization of metal matrix composites using strain gradient plasticity
• The effects of carbon nanotube orientation and aggregation on vibrational behavior of functionally graded nanocomposite cylinders by a mesh-free method
• Size-effects on yield surfaces for micro reinforced composites
• A study on the plastic properties of unidirectional nanocomposites with interface energy effects
• Concurrent topology optimization design for CNT orientation and CNTRC layout
• Multiscale modeling of CNT-based nanocomposites with soft/hard interphase effects
• A rigid-fiber-based boundary element model for strength simulation of carbon nanotube reinforced composites
• An analytical multiscale modeling of a nanocomposite anode with graphene nanosheets for lithium-ion battery
• A combined analytical formulation and genetic algorithm to analyze the nonlinear damage responses of continuous fiber toughened composites
• Applicability of the interface spring model for micromechanical analyses with interfacial imperfections to predict the modified exterior Eshelby tensor and effective modulus

This page was built for publication: A theory of plasticity for carbon nanotube reinforced composites

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q415319)