The effective mechanical properties of nonlinear isotropic composites

DOI10.1016/0022-5096(91)90030-RzbMath0734.73052MaRDI QIDQ811190

Publication date: 1991

Published in: Journal of the Mechanics and Physics of Solids (Search for Journal in Brave)

principle of minimum potential energy estimates bounds porous material nonlinear composites effective energy potentials power-law constitutive behavior principle of minimum complementary energy rigidly reinforced material two-phase incompressible composite

Mathematics Subject Classification ID

Composite and mixture properties (74E30) Optimization of other properties in solid mechanics (74P10)

Related Items

Second-Order Homogenization Estimates Incorporating Field Fluctuations in Finite Elasticity ⋮ Modelling the plastic anisotropy of metals ⋮ Tangent second-order estimates for the large-strain, macroscopic response of particle-reinforced elastomers ⋮ Stress–elastic strain relation for a two-phase isotropic strain gradient plastic composite ⋮ Constitutive modeling and finite element methods for TRIP steels ⋮ Effective hyperelastic material parameters from microstructures constructed using the planar Boolean model ⋮ Bounds and estimates for the effective yield surface of porous media with a uniform or a nonuniform distribution of voids ⋮ Non-Symmetric Thermal Shock In Ceramic Matrix Composite (Cmc) Materials ⋮ Efficient two-scale simulations of engineering structures using the Hashin-Shtrikman type finite element method ⋮ A model-reduction approach in micromechanics of materials preserving the variational structure of constitutive relations ⋮ Homogenized constitutive equations for porous single crystals plasticity ⋮ Numerical evaluation of macroscopic fatigue criterion of anisotropic materials using computational homogenization and conic programming ⋮ Reduced order variational multiscale enrichment method for elasto-viscoplastic problems ⋮ Bounding the plastic strength of polycrystalline solids by linear-comparison homogenization methods ⋮ Mathematical model and analysis of the strength of particle reinforced ideally plastic composites ⋮ The finite element square reduced (FE^2R ) method with GPU acceleration: towards three-dimensional two-scale simulations ⋮ A symmetric fully optimized second‐order method for nonlinear homogenization ⋮ An incremental‐secant mean‐field homogenization model enhanced with a non‐associated pressure‐dependent plasticity model ⋮ Correlation analysis of the elastic‐ideal plastic material behavior of short fiber‐reinforced composites ⋮ Instabilities of hyperelastic fiber composites: micromechanical versus numerical analyses ⋮ Effective thermoelasticity of polymer-bonded particle composites with imperfect interfaces and thermally expansive interphases ⋮ Fast construction of cluster interaction matrix for data-driven cluster-based reduced-order model and prediction of elastoplastic stress-strain curves and yield surface ⋮ Strength design of porous materials using B-Spline based level set method ⋮ The macroscopic behavior of power-law and ideally plastic materials with elliptical distribution of porosity ⋮ Non-linear homogenization of Forchheimer law for porous media with cylindrical and spherical impervious inclusions ⋮ A micromechanical mean‐field homogenization surrogate for the stochastic multiscale analysis of composite materials failure ⋮ Statistically compatible hyper-reduction for computational homogenization ⋮ Multiscale modeling of CNT-based nanocomposites with soft/hard interphase effects ⋮ Three-scale bridging for woven composites using homogenization techniques ⋮ Soft elastic composites: microstructure evolution, instabilities and relaxed response by domain formation ⋮ A semi-analytical model for the behavior of saturated viscoplastic materials containing two populations of voids of different sizes ⋮ On the optimality of the variational linear comparison bounds for porous viscoplastic materials ⋮ Theoretical predictions for the rheology of dispersions of highly deformable particles under large amplitude oscillatory shear ⋮ A multiscale finite element analysis model for predicting the effect of micro-aeration on the fragmentation of chocolate during the first bite ⋮ Bounds for nonlinear composite conductors via the translation method ⋮ Deformation and damage of composites with anisotropic components (review) ⋮ Elastic and inelastic local strain fields in composites with coated fibers or particles: theory and validation ⋮ Systematic study of homogenization and the utility of circular simplified representative volume element ⋮ Effective properties of composite materials with periodic microstructure: A computational approach ⋮ A pattern-based method for bounding the effective response of a nonlinear composite ⋮ The role of interfaces in enhancing the yield strength of composites and polycrystals ⋮ Macroscopic behavior and field fluctuations in viscoplastic composites: second-order estimates versus full-field simulations ⋮ An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals ⋮ Improved bounds for the effective properties of a nonlinear two-phase elastic composite ⋮ A second-order homogenization method in finite elasticity and applications to black-filled elastomers ⋮ A note on bounds for non-linear multivalued homogenized operators ⋮ Plastic energy-based analytical approach to predict the mechanical response of two-phase materials with application to dual-phase steels ⋮ Materials knowledge system for nonlinear composites ⋮ A finite strain incremental-secant homogenization model for elasto-plastic composites ⋮ An inverse micro-mechanical analysis toward the stochastic homogenization of nonlinear random composites ⋮ Remarks on symmetry conditions in computational homogenisation problems ⋮ Fourier-accelerated nodal solvers (FANS) for homogenization problems ⋮ Variational self-consistent estimates for cubic viscoplastic polycrystals: The effects of grain anisotropy and shape. ⋮ Distribution-enhanced homogenization framework and model for heterogeneous elasto-plastic problems ⋮ Numerical methods for porous metals with deformation-induced anisotropy ⋮ A generalized self-consistent polycrystal model for the yield strength of nanocrystalline materials ⋮ Homogenization estimates for the average behavior and field fluctuations in cubic and hexagonal viscoplastic polycrystals ⋮ Micromechanical modelling of porous materials under dynamic loading ⋮ Plastic potentials for anisotropic porous solids ⋮ An inelastic homogenization framework for layered materials with planes of weakness ⋮ Considering computational speed vs. accuracy: choosing appropriate mesoscale RVE boundary conditions ⋮ Homogenization of linear and of debonding composites usign the BEM ⋮ Second-order estimates for the effective behaviour of viscoplastic polycrystalline materials. ⋮ Nonlinear reduced order homogenization of materials including cohesive interfaces ⋮ High-rank nonlinear sequentially laminated composites and their possible tendency towards isotropic behavior. ⋮ A Statistical Framework for Generating Microstructures of Two-Phase Random Materials: Application to Fatigue Analysis ⋮ Micro-to-macro transition accounting for general imperfect interfaces ⋮ Numerical simulations and modeling of the effective plastic flow surface of a biporous material with pressurized intergranular voids ⋮ Model order reduction of nonlinear homogenization problems using a Hashin-Shtrikman type finite element method ⋮ Approximate analysis of extrusion process for Green type porous material ⋮ Variational estimates for the effective response and field statistics in thermoelastic composites with intra-phase property fluctuations ⋮ A new model for porous nonlinear viscous solids incorporating void shape effects I: Theory ⋮ A new model for porous nonlinear viscous solids incorporating void shape effects II: Numerical validation ⋮ Homogenization of Heat Diffusion in a Cracked Medium ⋮ A multiscale modeling of damage and time-dependent behavior of cohesive rocks ⋮ Homogenization of inelastic solid materials at finite strains based on incremental minimization principles. Application to the texture analysis of polycrystals. ⋮ A ``quasi-elastic affine formulation for the homogenised behaviour of nonlinear viscoelastic polycrystals and composites ⋮ Limit analysis and homogenization of porous materials with Mohr-Coulomb matrix. I: Theoretical formulation ⋮ Stationary variational estimates for the effective response and field fluctuations in nonlinear composites ⋮ Limit analysis and computational modeling of the hollow sphere model with a Mises-Schleicher matrix ⋮ Non linear homogenization approach of strength of nanoporous materials with interface effects ⋮ Strength properties of nanoporous materials: a 3-layered based non-linear homogenization approach with interface effects ⋮ New explicit expressions of the Hill polarization tensor for general anisotropic elastic solids ⋮ Ductile-to-brittle transition in tensile failure of particle-reinforced metals ⋮ Constitutive models for porous materials with evolving microstructure ⋮ A micromechanical model of elastoplastic and damage behavior of a cohesive geomaterial ⋮ A homogenization-based constitutive model for isotropic viscoplastic porous media ⋮ Micromechanics and effective moduli of elastic composites containing randomly dispersed ellipsoidal inhomogeneities ⋮ Infinite-contrast periodic composites with strongly nonlinear behavior: effective-medium theory versus full-field simulations ⋮ Multiscale methods for composites: A review ⋮ Effective thermoelastic properties of discrete-fiber reinforced materials with transversally-isotropic components ⋮ An energy criterion for the stress-induced martensitic transformation in a ductile system ⋮ A framework for constitutive relations and failure criteria for materials with distributed properties, with application to porous viscoplasticity ⋮ Extended Hashin-Shtrikman variational principles. ⋮ Assessment of hollow spheroid models for ductile failure prediction by limit analysis and conic programming ⋮ The effect of spatial distribution on the effective behavior of composite materials and cracked media ⋮ The overall elastoplastic behavior of multiphase materials with isotropic components ⋮ Micromechanical modeling of local field distribution for a planar composite under plastic deformation ⋮ Variational principles and the related bounding theorems for bi-modulus materials ⋮ A bipotential-based limit analysis and homogenization of ductile porous materials with non-associated Drucker-Prager matrix ⋮ Fourier-based strength homogenization of porous media ⋮ Mathematical homogenization of inelastic dissipative materials: a survey and recent progress ⋮ The effective non-linear properties of a composite coating and a composite sandwich layer ⋮ Prediction of shear-dominated ductile fracture in a butterfly specimen using a model of plastic porous solids including void shape effects ⋮ Computational homogenization of porous materials of Green type ⋮ Integration of a particle-based homogenization theory into a general damage-based constitutive model to improve the modelling of void nucleation to coalescence ⋮ Homogenization-based constitutive models for magnetorheological elastomers at finite strain ⋮ Bounds for nonlinear composites via iterated homogenization ⋮ A selfconsistent formulation for the prediction of the anisotropic behavior of viscoplastic polycrystals with voids ⋮ Second-order theory for the effective behavior and field fluctuations in viscoplastic polycrystals ⋮ An assessment of the role of the third stress invariant in the Gurson approach for ductile fracture ⋮ A set of enhanced formulations for existing nonlinear homogenization schemes and their evaluation ⋮ An approximate yield criterion for porous single crystals ⋮ A top-down approach for the prediction of hardness and toughness of hierarchical materials ⋮ A homogenization theory for the overall creep of isotropic viscoplastic composites ⋮ Homogenization estimates for multi-scale nonlinear composites ⋮ A micromechanics-based modification of the Gurson criterion by using Eshelby-like velocity fields ⋮ Generalized grain cluster method for multiscale response of multiphase materials ⋮ Computational micro-to-macro transitions for discretized micro-structures of heterogeneous materials at finite strains based on the minimization of averaged incremental energy. ⋮ A theory of plasticity for carbon nanotube reinforced composites ⋮ A second-moment incremental formulation for the mean-field homogenization of elasto-plastic composites ⋮ A micromechanics based damage model for composite materials ⋮ Effect of surface/interface stress on the plastic deformation of nanoporous materials and nanocomposites ⋮ Rigorous bounds on the effective moduli of composites and inhomogeneous bodies with negative-stiffness phases ⋮ A new variational estimate for the effective response of hyperelastic composites ⋮ A constitutive model for plastically anisotropic solids with non-spherical voids ⋮ A variational formulation for the incremental homogenization of elasto-plastic composites ⋮ Intraphase strain heterogeneity in nonlinear composites: A computational approach ⋮ Numerically explicit potentials for the homogenization of nonlinear elastic heterogeneous materials ⋮ Mechanics of creep resistance in nanocrystalline solids ⋮ The competition of grain size and porosity in the viscoplastic response of nanocrystalline solids ⋮ Linear and nonlinear dielectric properties of particulate composites at finite concentration ⋮ Nonlinear elastic properties of particulate composites ⋮ The constitutive law of nonlinear viscous and porous materials ⋮ New variational principles in plasticity and their application to composite materials ⋮ An extension of the secant method for the homogenization of the nonlinear behavior of composite materials ⋮ A multiscale mean-field homogenization method for fiber-reinforced composites with gradient-enhanced damage models ⋮ Tight bounds for three-dimensional nonlinear incompressible elastic composites ⋮ Bounds and estimates for the effect of strain gradients upon the effective plastic properties of an isotropic two-phase composite ⋮ Porous materials with two populations of voids under internal pressure. I. Instantaneous constitutive relations ⋮ Porous materials with two populations of voids under internal pressure. II. Growth and coalescence of voids ⋮ Numerical simulation of elasto-plastic deformation of composites: evolution of stress microfields and implications for homogenization models ⋮ Two-stage data-driven homogenization for nonlinear solids using a reduced order model ⋮ Homogenized Gurson-type behavior equations for strain rate sensitive materials ⋮ Localization of elastic deformation in strongly anisotropic, porous, linear materials with periodic microstructures: exact solutions and dilute expansions ⋮ Modeling the macroscopic behavior of two-phase nonlinear composites by infinite-rank laminates ⋮ Recoverable strains in composite shape memory alloys ⋮ Void coalescence in porous ductile solids containing two populations of cavities ⋮ Micromechanical approach to the strength properties of frictional geomaterials ⋮ Deformation and long-term damage of physically nonlinear fibrous materials ⋮ Bounds and estimates for linear composites with strain gradient effects ⋮ A multiscale approach for modeling progressive damage of composite materials using fast Fourier transforms ⋮ A finite-strain model for anisotropic viscoplastic porous media. I : Theory ⋮ A finite-strain model for anisotropic viscoplastic porous media. II : Applications ⋮ Overall potentials and extremal surfaces of power law or ideally plastic composites ⋮ On the influence of local fluctuations in volume fraction of constituents on the effective properties of nonlinear composites. Application to porous materials ⋮ Estimation of very narrow bounds to the behavior of nonlinear incompressible elastic composites ⋮ Effect of inner gas pressure on the elastoplastic behavior of porous materials: A second-order moment micromechanics model ⋮ Constitutive modeling of solid propellant materials with evolving microstructural damage ⋮ Some reflections on the Mori-Tanaka and Ponte Castañeda-Willis methods with randomly oriented ellipsoidal inclusions ⋮ A dual homogenization and finite element study on the in-plane local and global behavior of a nonlinear coated fiber composite ⋮ Functional methods and effective potentials for nonlinear composites ⋮ A micromechanical damage model for effective elastoplastic behavior of ductile matrix composites considering evolutionary complete particle debonding ⋮ A micromechanical approach to damage in viscoplastic materials by evolution in size, shape and distribution of voids ⋮ Improved bounds for the yield stress of a model polycrystalline material ⋮ Effect of regularization of Schmid law on self-consistent estimates for rate-independent plasticity of polycrystals ⋮ A macro-meso constitutive law for concrete having imperfect interface and nonlinear matrix ⋮ Morphologically representative pattern-based bounding in elasticity. ⋮ Variational bounds for the overall properties of piezoelectric composites. ⋮ The role of strain gradients in the grain size effect for polycrystals. ⋮ Exact second-order estimates for the effective mechanical properties of nonlinear composite materials. ⋮ Bounds of third order for the overall response of nonlinear composites ⋮ Effective properties of porous ideally plastic or viscoplastic materials containing rigid particles ⋮ A secant-viscosity approach to the time-dependent creep of an elastic-viscoplastic composite ⋮ A general constitutive theory for linear and nonlinear particulate media with microstructure evolution ⋮ Self-consistent elastoplastic stress solutions for functionally graded material systems subjected to thermal transients ⋮ Second-order homogenization estimates for nonlinear composites incorporating field fluctuations. I: Theory ⋮ Second-order homogenization estimates for nonlinear composites incorporating field fluctuations. II: Applications ⋮ Approximate models for ductile metals containing non-spherical voids -- case of axisymmetric prolate ellipsoidal cavities

Cites Work