A plastic constitutive equation incorporating strain, strain-rate, and temperature

DOI10.1016/J.IJPLAS.2010.02.005zbMATH Open1426.74084OpenAlexW2128719180MaRDI QIDQ416375FDOQ416375

Authors: Ji Hyun Sung, Ji Hoon Kim, R. H. Wagoner 

Publication date: 10 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.02.005

Recommendations

• Constitutive relation for steels approximating quasi-static and intermediate strain rates at large deformations
• Constitutive modeling of temperature and strain rate dependent elastoplastic hardening materials using a corotational rate associated with the plastic deformation
• A constitutive viscoplastic temperature dependent material model for explicit finite element simulation
• A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures
• Ductility of interstitial-free steel under high strain rate tension: experiments and macroscopic modeling with a physically-based consideration

zbMATH Keywords

constitutive equationthermaldeformation-induced heatingdual-phase (DP) steelmechanical FE simulationwork hardening

Mathematics Subject Classification ID

Thermal effects in solid mechanics (74F05) Experimental work for problems pertaining to mechanics of deformable solids (74-05) Large-strain, rate-dependent theories of plasticity (74C20)

Cites Work

• Behaviors of three BCC metal over a wide range of strain rates and temperatures: Experiments and modeling
• Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys
• Multi-scale micromorphic theory for hierarchical materials
• Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures
• Linking microstructure and properties through a predictive multiresolution continuum
• Constitutive relations in 3D for a wide range of strain rates and temperatures -- application to mild steels
• Micromechanical finite element calculations of temperature and void configuration effects on void growth and coalescence
• Constitutive equations for hot-working of metals
• Mechanically alloyed nanocrystalline iron and copper mixture: Behavior and constitutive modeling over a wide range of strain rates
• Continuous, large strain, tension/compression testing of sheet material
• Theoretical plasticity of textured aggregates
• Finite deformation of a polymer: Experiments and modeling
• An internal variable constitutive model for hot working of metals

Cited In (18)

• Explicit stress-strain and temperature relations for stainless steel in tension and compression
• Unified simulation of hardening and softening effects for metals up to failure
• An accurate and explicit approach to modeling realistic hardening‐to‐softening transition effects of metals
• Complex unloading behavior: nature of the deformation and its consistent constitutive representation
• Constitutive relation for steels approximating quasi-static and intermediate strain rates at large deformations
• Ductility of interstitial-free steel under high strain rate tension: experiments and macroscopic modeling with a physically-based consideration
• Duplex model for homogenized elastic-viscoplastic behavior of plate-fin structures at high temperatures
• Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation
• Simulation of damage evolution in ductile metals undergoing dynamic loading conditions
• The shear fracture of dual-phase steel
• Диаграмма предельных деформаций при горячей листовой штамповке металлов. Обзор моделей материала, критериев вязкого разрушения и стандартных испытаний
• An enhanced data-driven constitutive model for predicting strain-rate and temperature dependent mechanical response of elastoplastic materials
• A new integration algorithm for finite deformation of thermo-elasto-viscoplastic single crystals
• Predicting hot deformation behaviors under multiaxial loading using the Gurson-Tvergaard-Needleman damage model for Ti-6Al-4V alloy sheets
• Title not available (Why is that?)
• Constitutive modelling of the high strain rate behaviour of interstitial-free steel.
• The characteristics of plastic flow and a physically-based model for 3003 Al-Mn alloy upon a wide range of strain rates and temperatures
• A multiphase-field approach to small strain crystal plasticity accounting for balance equations on singular surfaces

Uses Software

• ABAQUS

This page was built for publication: A plastic constitutive equation incorporating strain, strain-rate, and temperature

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q416375)