ABAQUS

swMATH4215MaRDI QIDQ16398FDOQ16398

Author name not available (Why is that?)

Described by source

• Applied Soil Mechanics
• Design of stiffness for air spring based on ABAQUS
• Implementation of the Arlequin method into ABAQUS: basic formulations and applications

Cited In (only showing first 100 items - show all)

• Adhesive contact of elastic-plastic spheres
• Soft elastic response of stretched sheets of nematic elastomers: A numerical study
• A six node plane strain triangular Cosserat point element (\textit{CPE}) for nonlinear elasticity
• Numerical study of the critical impact velocity in shear
• An approach to the coupled behaviour of polymers subjected to a thermo-mechanical loading in a gaseous environment
• Explicit consistent tangent moduli with a return mapping algorithm for pressure-dependent elastoplasticity models
• Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation.
• Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning
• A temperature-driven strength reduction method for slope stability analysis
• On the stress distribution around the hole in mechanically fastened joints
• Non-linear in-plane multiple equilibria and buckling of pin-ended shallow circular arches under an arbitrary radial point load
• Integral-based constitutive equation for rubber at high strain rates
• Impact behavior of honeycombs under combined shear-compression. II: Analysis
• Mixed-mode singularity and temperature effects on dislocation nucleation in strained interconnects
• A straightforward numerical technique for finite element implementation of non-local gradient-dependent continuum damage mechanics theories
• Explicit finite element implementation of an improved three dimensional constitutive model for shape memory alloys
• Compressible rigid viscoplastic fluids
• Plasticity in polycrystalline fretting fatigue contacts
• Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals
• Reusing linear finite elements in material and geometrically nonlinear analysis -- application to plane stress problems
• Computational mechanics modelling of cell-substrate contact during cyclic substrate deformation
• Scattering of flexural wave in thin plate with multiple holes by using the null-field integral equation approach
• Dynamic stiffness matrix for flexural-torsional, lateral buckling and free vibration analyses of mono-symmetric thin-walled composite beams
• Assumed strain nodally integrated hexahedral finite element formulation for elastoplastic applications
• A simplified canonical form algorithm with application to porous metal plasticity
• Three-dimensional analysis of single pile response to lateral soil movements
• Consistent linearization and finite element implementation of an incrementally objective canonical form return mapping algorithm for large deformation inelasticity
• Thermomechanical homogenization analysis of axisymmetric inelastic solids at finite strains based on an incremental minimization principle
• Line‐search methods in general return mapping algorithms with application to porous plasticity
• Toward realization of computational homogenization in practice
• The simple boundary element method for multiple cracks in functionally graded media governed by potential theory: a three-dimensional Galerkin approach
• On the consequences of T-stress in elastic brittle fracture
• On finite-strain damage of viscoelastic-fibred materials. Application to soft biological tissues
• Simo-Vu Quoc rods using Clifford algebra
• Updated Lagrangian Formulation of a Flat Triangular Element for Thin Laminated Shells
• On the use of enriched finite element method to model subsurface features in porous media flow problems
• Mixed spectral/\(hp\) element formulation for nonlinear elasticity
• A multiscale Taylor model-based constitutive theory describing grain growth in polycrystalline cubic metals
• Modelling and parameter re-identification of nanoindentation of soft polymers taking into account effects of surface roughness
• A nonlocal continuum damage mechanics approach to simulation of creep fracture in ice sheets
• A ten node tetrahedral Cosserat point element (CPE) for nonlinear isotropic elastic materials
• Exact solution for free in-plane vibration analysis of an eccentric elliptical plate
• A damage model for the blistering of polyvinylidene fluoride subjected to carbon dioxide decompression
• Intergranular strain evolution near fatigue crack tips in polycrystalline metals
• Incubation time fracture criterion for FEM simulations
• A thermodynamics framework and numerical aspects for transformation-induced plasticity at large strains
• Geometrical nonlinear analysis of thin-walled composite beams using finite element method based on first-order shear deformation theory
• Elastic-plastic behavior of a semicircular frame being pressed against a rigid plane
• On the exploitation of Armstrong-Frederik type nonlinear kinematic hardening in the numerical integration and finite-element implementation of pressure dependent plasticity models
• Application of extended Mohr-Coulomb criterion to ductile fracture
• Application of an iterative global approximation technique to structural optimizations
• Nanoindentation of hyperelastic polymer layers at finite deformation and parameter re-identification
• Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading
• Microstructure-sensitive extreme value probabilities for high cycle fatigue of Ni-base superalloy IN100
• The atomic-scale finite element method
• Computational modelling of plasticity induced by martensitic phase transformations
• On the Mullins effect and hysteresis of fibered biological materials: a comparison between continuous and discontinuous damage models
• On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals
• Mode I fracture of sheet metal
• Predictive modeling of nanoindentation-induced homogeneous dislocation nucleation in copper
• Higher order topological derivatives in elasticity
• Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model
• Bending moment calculations for piles based on the finite element method
• Acoustic radiation from a submerged hollow FGM sphere
• The influence of the initial microdamage anisotropy on macrodamage mode during extremely fast thermomechanical processes
• A Cosserat multiparticle model for periodically layered materials
• Effects of prebuckling analyses on determining buckling loads of pin-ended circular arches
• A general damage theory: solution of \(n^{\text{th}}\)-order equations using unified framework
• On the use of some numerical damping methods of spurious oscillations in the case of elastic wave propagation
• Vibration analysis of a planar multilink manipulator using a reduced-order matrix formulation
• A mode II crack problem with sliding contact in an orthotropic strip
• Computational modeling of mixed-mode fatigue crack growth using extended finite element methods
• A macroscopic constitutive model for shape-memory alloys: theory and finite element simulations
• Inverse viscoelastic material characterization using POD reduced-order modeling in acoustic-structure interaction
• Effects of microstructure variability on intrinsic fatigue resistance of nickel-base superalloys - a computational micromechanics approach
• Mechanics of deformation-triggered pattern transformations and superelastic behavior in periodic elastomeric structures
• The mode I crack growth resistance of metallic foams.
• Polycrystalline shape-memory materials: Effect of crystallographic texture
• Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids
• An analytic model for the response to water blast of unsupported metallic sandwich panels
• Buckling of a stiff thin film on a compliant substrate in large deformation
• Finite element simulations of martensitic phase transitions and microstructures based on a strain softening model
• Flexural-torsional buckling loads for spatially coupled stability analysis of thin-walled composite columns
• A constitutive model for elastoplastic solids containing primary and secondary voids
• An improved 3-D brick Cosserat point element for irregular shaped elements
• Macro modelling and homogenization for transformation induced plasticity of a low-alloy steel
• Hyperelasticity and physical shear buckling of a block predicted by the Cosserat point element compared with inelasticity and hourglassing predicted by other element formulations
• A comparison between pseudo-elastic and damage models for modelling the Mullins effect in industrial rubber components
• An anisotropic pseudo-elastic approach for modelling Mullins effect in fibrous biological materials
• Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals
• Coupled thermo-mechanical modelling of bulk-metallic glasses: theory, finite-element simulations and experimental verification
• Null-field integral equation approach for free vibration analysis of circular plates with multiple circular holes
• Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers
• Constitutive equations for porous plane-strain gradient elasticity obtained by homogenization
• Cavitation in elastic and elastic-plastic solids
• A Voronoi cell finite element model for particle cracking elastic-plastic composite materials
• Numerical investigation of dynamic shear bands in inelastic solids as a problem of mesomechanics
• Ductile crack growth. II: Void nucleation and geometry effects on macroscopic fracture behavior
• Grain boundary versus transgranular ductile failure
• Homogenization of two-phase elasto-plastic composite materials and structures. Study of tangent operators, cyclic plasticity and numerical algorithms

This page was built for software: ABAQUS