scientific article; zbMATH DE number 1094636
The gas turbines used in aviation and industry are subjected to very high temperatures at the inlet of the turbine engines. As a result, the turbine blades are heated too much, and their lifetime is reduced significantly. In order to comply with the modern safety standards, the blades need to be cooled down continuously. The present thesis deals with the process and theory involved in the cooling of the turbine blades. There are in general three methods of cooling, namely the internal cooling, the coating, and the film cooling. Here the first method is used. The internal cooling is obtained by routing the coolant air through the turbulent passages within the blades and it removes heat from the blades by the convective process. The coolant air is then ejected either at the tip of the blade through the cooling slots along the trailing edge, or through the cooling holes along the blade surface. In order to create holes in blades, the drilling technique is most convenient. The drilling is done through an electro-chemical process called ECD. Its physical and mathematical modellings are therefore discussed. Similarly, the physical and mathematical modelling of the cooling process are also obtained. By these modellings, the resulting set of the differential equations and the relevant free and fixed boundary and initial conditions are obtained. In order to solve these equations, the numerical approach by the mixed finite element methods and others are discussed which lead to ECD drilling simulation. The Navier-Stokes equations in the fluid dynamics come in the theoretical explanations, and hence their solutions by numerical methods are discussed in detail, the more complicated phenomena of turbulence of the cooling fluid also come in, and their solutions are also required in the numerical form on suitable computers. Since the temperature is the predominant aspect in the cooling of the turbine blades, the heat transfer equations are dealt with both in the unsteady laminar flow as well as in the turbulent flows. In short, the thesis aims at the methods by which the cooling of the turbine blades may be done through the theoretical (analytical and numerical) as well as the practical aspects. In order to appreciate the contents, it is thus necessary to have an over-all idea of fluid dynamics (in laminar and turbulent flows), the heat flow, and numerical methods of their solution, besides the practical technique of drilling process.
- Inverse design of multiholed internally cooled turbine blades
- scientific article; zbMATH DE number 1416325
- Calculation of the flow around a high-pressure turbine blade with cooling-jet injection from slots at the leading edge
- scientific article; zbMATH DE number 2177617
- scientific article; zbMATH DE number 4204017
- Numerical analysis of dynamic behavior of stream turbine blade group
- Numerical simulation of steady-state heat transfer in a ceramic-coated gas turbine blade
- Calculation of the flow around a high-pressure turbine blade with cooling-jet injection from slots at the leading edge
- scientific article; zbMATH DE number 2177617 (Why is no real title available?)
- scientific article; zbMATH DE number 1416325 (Why is no real title available?)
- scientific article; zbMATH DE number 1441953 (Why is no real title available?)
- Numerical-analytical study of the turbulent flow of lubricoolant when interacting with a part and a tool in the process of machining deep holes
- Real time numerical simulation and visualization of electrochemical drilling
- The heat/mass transfer analogy for a simulated turbine blade
- Comparative analysis of steady state heat transfer in a TBC and functionally graded air cooled gas turbine blade
This page was built for publication:
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4368435)