New crack‐tip elements for XFEM and applications to cohesive cracks
From MaRDI portal
Publication:4446751
Recommendations
- A consistent partly cracked XFEM element for cohesive crack growth
- A partly and fully cracked triangular XFEM element for modeling cohesive fracture
- Crack tip enrichment in the XFEM using a cutoff function
- A stable X-FEM in cohesive transition from closed to open crack
- An improved stable XFEM (Is-XFEM) with a novel enrichment function for the computational modeling of cohesive cracks
- Energy-based modeling of cohesive and cohesionless cracks via X-FEM
- An XFEM/spectral element method for dynamic crack propagation
- An XFEM method for modeling geometrically elaborate crack propagation in brittle materials
- Discrete crack modelling in a new X-FEM format with emphasis on dynamic response
- Improved implementation and robustness study of the X-FEM for stress analysis around cracks
Cited in
(only showing first 100 items - show all)- Modeling fracture propagation in a rock‐water‐air system with the assumed enhanced strain method
- Crack face contact in X-FEM using a segment-to-segment approach
- Extraction of stress intensity factors of biharmonic equations with corner singularities corresponding to mixed boundary conditions of clamped, simply supported, and free (II)
- XFEM-based element subscale refinement for detailed representation of crack propagation in large-scale analyses
- Modern topics and challenges in dynamic fracture
- Improving the conditioning of XFEM/GFEM for fracture mechanics problems through enrichment quasi-orthogonalization
- A numerical study on the accuracy of crack tip field by an extended finite element method
- Three-dimensional nonlinear fracture mechanics by enriched meshfree methods without asymptotic enrichment
- A state-of-the-art review of the X-FEM for computational fracture mechanics
- Hybrid equilibrium element with interelement interface for the analysis of delamination and crack propagation problems
- Parametrized reduced order modeling for cracked solids
- An XFEM multilayered heaviside enrichment for fracture propagation with reduced enhanced degrees of freedom
- Direct evaluation of stress intensity factors for curved cracks using Irwin's integral and XFEM with high-order enrichment functions
- Stable 3D XFEM/vector level sets for non-Planar 3D crack propagation and comparison of enrichment schemes
- Higher-order XFEM for curved strong and weak discontinuities
- Mesh refinement strategies without mapping of nonlinear solutions for the generalized and standard FEM analysis of 3-D cohesive fractures
- Accurate fracture modelling using meshless methods, the visibility criterion and level sets: formulation and 2D modelling
- Investigation of mixed-mode stress intensity factors for nonhomogeneous materials using an interaction integral method
- A geometrically nonlinear FE approach for the simulation of strong and weak discontinuities
- Configurational-force interface model for brittle fracture propagation
- A unified enrichment approach addressing blending and conditioning issues in enriched finite elements
- Investigation of the shear band evolution in soil-rock mixture using the assumed enhanced strain method with the meshes of improved numerical manifold method
- Crack self-healing of thermo-responsive shape memory polymers with application to control valves, filtration, and drug delivery capsule
- Coupling of FEM meshes with peridynamic grids
- Robustness in stable generalized finite element methods (SGFEM) applied to Poisson problems with crack singularities
- Interface material failure modeled by the extended finite-element method and level sets
- Numerical simulation of fracking in shale rocks: current state and future approaches
- A stable extended/generalized finite element method with Lagrange multipliers and explicit damage update for distributed cracking in cohesive materials
- From diffuse damage to sharp cohesive cracks: a coupled XFEM framework for failure analysis of quasi-brittle materials
- Extended particle difference method for weak and strong discontinuity problems. I: Derivation of the extended particle derivative approximation for the representation of weak and strong discontinuities
- A stable generalized/extended FEM with discontinuous interpolants for fracture mechanics
- Numerical modelling of crack propagation in ductile materials combining the GTN model and X-FEM
- Effect of material irregularities on fatigue crack growth by enriched techniques
- An improved stable XFEM (Is-XFEM) with a novel enrichment function for the computational modeling of cohesive cracks
- A novel application of recovered stresses in stress intensity factors extraction methods for the generalized/extended finite element method
- T-stress evaluations for nonhomogeneous materials using an interaction integral method
- DOF‐gathering stable generalized finite element methods for crack problems
- Complete tangent stiffness for extended finite element method by including crack growth parameters
- Conforming to interface structured adaptive mesh refinement: 3D algorithm and implementation
- A two-dimensional co-rotational Timoshenko beam element with XFEM formulation
- Immersed finite element approximation for semi-linear parabolic interface problems combining with two-grid methods
- Extraction of stress intensity factors of biharmonic equations with free boundary conditions on crack faces. III: SIF of a thin plate subjected to the bending moment
- On the fracture models determined by the continuum-strong discontinuity approach
- Higher-order accurate integration of implicit geometries
- Computational aspects of the mechanics of complex materials
- A stable X-FEM in cohesive transition from closed to open crack
- A phase-field model for mixed-mode fracture based on a unified tensile fracture criterion
- The phase-field model with an auto-calibrated degradation function based on general softening laws for cohesive fracture
- A comment on the article ``A finite element method for simulation of strong and weak discontinuities in solid mechanics by A. Hansbo and P. Hansbo
- Hybrid equilibrium formulation with adaptive element side orientation for cohesive crack prediction
- A comparative study on finite elements for capturing strong discontinuities: E-FEM vs X-FEM
- Gradient-enhanced damage modeling of cracked bodies by reproducing kernel element method
- A coupling approach of state-based peridynamics with node-based smoothed finite element method
- Generalized finite element method enrichment functions for curved singularities in 3D fracture mechanics problems
- A general mass lumping scheme for the variants of the extended finite element method
- A conforming enriched finite element method for elliptic interface problems
- Well-conditioned and optimally convergent second-order generalized/extended FEM formulations for linear elastic fracture mechanics
- A simple, first-order, well-conditioned, and optimally convergent generalized/extended FEM for two- and three-dimensional linear elastic fracture mechanics
- Isogeometric analysis of cracks with peridynamics
- Incremental-secant modulus iteration scheme and stress recovery for simulating cracking process in quasi-brittle materials using XFEM
- Enhanced blending elements for XFEM applied to linear elastic fracture mechanics
- Multiscale XFEM-modelling and simulation of the inelastic material behaviour of textile-reinforced polymers
- An interface-unfitted conforming enriched finite element method for Stokes-elliptic interface problems with jump coefficients
- A stable generalized/extended \(p\)-hierarchical FEM for three-dimensional linear elastic fracture mechanics
- An improved cohesive element for shell delamination analyses
- A contact algorithm for frictional crack propagation with the extended finite element method
- Implementation of the extended finite element method for dynamic thermoelastic fracture initiation
- Higher-order meshing of implicit geometries. I: Integration and interpolation in cut elements
- Improving the accuracy of XFEM crack tip fields using higher order quadrature and statically admissible stress recovery
- An augmented cohesive zone element for arbitrary crack coalescence and bifurcation in heterogeneous materials
- 3D crack propagation with cohesive elements in the extended finite element method
- Error estimation and adaptivity for discontinuous failure
- The XFEM for nonlinear thermal and phase change problems
- An optimal multigrid algorithm for the combining \(P_1\)-\(Q_1\) finite element approximations of interface problems based on local anisotropic fitting meshes
- An XFEM frame for plate elements in yield line analyses
- Modeling of both tensional-shear and compressive-shear fractures by a unified phase-field model
- Anomalous behavior of bilinear quadrilateral finite elements for modeling cohesive cracks with XFEM/GFEM
- On tailoring fracture resistance of brittle structures: a level set interface-enriched topology optimization approach
- Computational methods for fracture in brittle and quasi-brittle solids: state-of-the-art review and future perspectives
- An automated mesh generation algorithm for simulating complex crack growth problems
- A two-dimensional simulation of solidification processes in materials with thermo-dependent properties using XFEM
- An XFEM plate element for high gradient zones resulted from yield lines
- An extended consecutive-interpolation quadrilateral element (XCQ4) applied to linear elastic fracture mechanics
- Convergence analysis of linear or quadratic X-FEM for curved free boundaries
- A variational model based on isogeometric interpolation for the analysis of cracked bodies
- An efficient hydro-mechanical model for coupled multi-porosity and discrete fracture porous media
- Hybrid crack-tip element and its applications.
- Stress analysis around crack tips in finite strain problems using the eXtended finite element method
- An XFEM method for modeling geometrically elaborate crack propagation in brittle materials
- A new crack tip element for the phantom-node method with arbitrary cohesive cracks
- Shear-band capturing using a multiscale extended digital image correlation technique
- An extended finite element method for modeling near-interfacial crack propagation in a layered structure
- The extended/generalized finite element method: An overview of the method and its applications
- Progressive delamination analysis of composite materials using XFEM and a discrete damage zone model
- A fast adaptive PD-FEM coupling model for predicting cohesive crack growth
- A novel semi-explicit numerical algorithm for efficient 3D phase field modelling of quasi-brittle fracture
- A 3D locking-free XFEM formulation for the von Mises elasto-plastic analysis of cracks
- XIGA: an eXtended IsoGeometric analysis approach for multi-material problems
- An efficient augmented finite element method for arbitrary cracking and crack interaction in solids
- Crack identification by ‘arrival time’ using XFEM and a genetic algorithm
This page was built for publication: New crack‐tip elements for XFEM and applications to cohesive cracks
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4446751)
