scientific article; zbMATH DE number 3308176

Cited in

(only showing first 100 items - show all)

Prediction of mixed-mode fracture based on an elasto-plastic energy balance criterion
The onset of fracture at the tip of a three-dimensional crack in a solid subjected to bending loads
Boundary integral equation method in micropolar elasticity
On the crack propagation in micropolar elastic solids
A moving crack problem along the interface of two viscoelastic media
A double inclusion model for microcrack arrest in fibre reinforced brittle materials
Crack reinforcement by distributed springs
Crack tip singular fields in ductile crystals with Taylor power-law hardening. I. Anti-plane shear
A self-consistent analysis of a creeping matrix with aligned cracks
Plane strain elastic-ideally plastic crack fields for mode I quasistatic growth at large-scale yielding. I: A new family of analytical solutions
Mode III crack in an isotropic elastic half-space
The penny-shaped crack problem in micropolar elasticity
Wave motion in micropolar elastic bars with rectangular cross section
Crack separation energy-rates for the DBCS model under biaxial modes of loading
The penny-shaped crack problem in micropolar thermoelasticity
The problem of a Griffith crack in micropolar elasticity
A line plastic-zone model for steady mode III crack growth in an elastic-plastic material
Calculation of the scattering of elastic waves from a penny-shaped crack by the method of optimal truncation
Creep deformation at crack tips in elastic-viscoplastic solids
On distortion of tensor and yield criteria of granular materials
Microanelasticity of a vibrating rod containing particles with magnetic moment
Quasi-brittle dynamic fracture with damping due to crack edge failure zones
The influence of inertia on elastic-plastic antiplane-shear crack growth
Asymptotic analysis of growing plane strain tensile cracks in elastic- ideally plastic solids
Nonlinear wave modulation in micropolar elastic media. I: Longitudinal waves
The criterion for expressing the plastic contribution to the J integral in terms of two eta factors
The extended stress field around a cylindrical crack using the theory of dislocation pile-ups
On \(J\)-integrals in the plane fracture of composite materials
The relation between crack growth resistance and fracture process parameters in elastic-plastic solids
The directional instability of the running crack: A deterministic and stochastic approach
The fracture mechanics of slit-like cracks in anisotropic elastic media
Effects of secondary diffractions on the stress intensity factors generated for a finite crack by a shear wave
On the elastic-plastic deformation of a sheet containing an edge crack
Non-symmetric extension of a plane crack due to tensile pre-stress and dilatational waves
Integral transform procedures for forced response of composite domain micropolar elasticity problems
Fracture mechanics of interfacial cracks
Stress singularities at an elastic crack with arbitrary surface loads, including possible fracture mechanics applications
Non-symmetric extension of a small flaw into a plane crack at a constant rate under polynomial-form loadings
Two basic problems of plane crack extension: a unified treatment
Boundary-layer analysis of propagating mode II cracks in porous elastic media
Matched asymptotic expansions in nonlinear fracture mechanics. I: Longitudinal shear of an elastic perfectly-plastic specimen
Plastic yielding on inclined slip-planes at a crack tip
Crack-tip problem in non-local elasticity
Strain localization in ductile single crystals
On wave propagation in a micropolar elastic cylinder
Crack-tip fields in steady crack-growth with linear strain-hardening
Lame polynomial solutions to some elliptic crack and punch problems
Continuing crack-tip deformation and fracture for plane-strain crack growth in elastic-plastic solids
Rapid interface flaw extension with friction. - I. Basic analysis
An effective boundary-integral approach for the mixed boundaryvalue problems of linear elastostatics
On the flexural rigidity of a micropolar elastic circular cylindrical tube
Eigenstrain methods in three-dimensional crack problems: An alternative integration procedure
Principle of maximum energy dissipation rate in crack dynamics
The damage process zone characteristics at crack tip in concrete
Singularities in bi-materials: Parametric study of an isotropic/anisotropic joint
Non-steady state solution of a moving crack in an anisotropic solid
An employment of the catastrophe theory in fracture mechanics as applied to brittle strength criteria
Torsional analysis of micropolar elasticity using the finite element method
The representation of \(J\) in terms of eta factors and energy integrals for an elastic softening solid
Boundary element method for micropolar elasticity
The difference between the \(J_D\) and \(J_M\) crack growth resistance curves for a tensile loading situation
Analysis of an internal central crack with bridging fibers in a finite orthotropic plate
Micropolar elastic fields due to a circular cylindrical inclusion
Acceleration waves in simple and linear viscoelastic micropolar materials
Effective toughness of heterogeneous brittle materials
The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts.
Asymptotic study of the interfacial crack with friction
A molecular mechanics simulation of cracks and fractures in a sheet of ice
Mode-dependent toughness and the delamination of compressed thin films
Hexagonal piezoelectric half-space containing a crack
Stable absorbing boundary conditions for molecular dynamics in general domains
Determination of the stress state of a piecewise homogeneous elastic body with a row of cracks on an interface surface subject to antiplane strains with inclusions at the tips
Development of the distributed dislocation dipole technique for the analysis of closure of complex fractures involving kinks and branches
Quasi-sudden brittle fracture at both edges of a finite crack
Finite element treatment of a uniformly moving elastic-plastic crack tip
A displacement discontinuity method of high-order accuracy in fracture mechanics
Determination of stress intensity factors in three-dimensional problems of fracture mechanics
Mechanics of a pressurized penny-shaped crack in a poroelastic halfspace
Coupling of complex function theory and finite element method for crack propagation through energetic formulation: conformal mapping approach and reduction to a Riemann-Hilbert problem
Shifted impact oscillator: tuned multiple resonances and step load
Homogenization of free discontinuity problems
Error estimates for the coupling of analytical and numerical solutions
Anti-plane stress analysis of orthotropic rectangular planes weakened by multiple defects
Anti-plane analysis of an orthotropic strip weakened by several moving cracks
Analytic parametric solutions for the HRR nonlinear elastic field with low hardening exponents
Dislocation technique to obtain the dynamic stress intensity factors for multiple cracks in a half-plane under impact load
Improved convergence results for the finite element method with holomorphic functions
The elastic field of a crack extending non-uniformly under general anti- plane loading
Analysis of a non-linear crack model
Crack propagation generated by a horizontally polarized shear wave
Balance laws of micromorphic mechanics
Brittle and ductile extension of a finite crack by a horizontally polarized shear wave
A strain-rate dependent crack model
Finite-element analysis of a fracture toughness test specimen in the non- linear range
An examination of the effects of some idealized models of fracture on accelerating cracks
Crack propagation in an elastic solid subjected to general loading. I: Constant rate of extension. II: Non-uniform rate of extension
Dynamically induced fracture
Theory of micromorphic materials with memory
Theory of thermomicrofluids
On nonlocal microfluid mechanics

This page was built for publication:

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q5589173)