Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space
From MaRDI portal
Publication:994643
DOI10.1016/J.IJSOLSTR.2010.02.010zbMATH Open1194.74220arXiv0911.4334OpenAlexW2074857390MaRDI QIDQ994643FDOQ994643
Publication date: 13 September 2010
Published in: International Journal of Solids and Structures (Search for Journal in Brave)
Abstract: In this paper, adhesive contact of a rigid cylinder on an elastic power-law graded half-space is studied analytically with the theory of weakly singular integral equation and orthogonal polynomial method. Emphasis is placed on the coupling effect between tangential and normal directions which was often neglected in previous works. Our analysis shows that the coupling effect tends to minimize the contact area in the compressive regime. The effect of bending moment on the adhesion behavior is also examined. Like a pull-off force, there also exist a critical bending moment at which the cylinder can be bended apart from the substrate. However, unlike pull-off force, the critical bending moment is insensitive to the gradient exponent of the graded material.
Full work available at URL: https://arxiv.org/abs/0911.4334
Recommendations
- Non-slipping adhesive contact of an elastic cylinder on stretched substrates
- Mechanics of adhesive contact on a power-law graded elastic half-space
- Orientation-dependent adhesion strength of a rigid cylinder in non-slipping contact with a transversely isotropic half-space
- Adhesive tangential impact without slip of a rigid sphere and a power‐law graded elastic half‐space
- Non-slipping adhesive contact between mismatched elastic cylinders
- A nonlinear elastic contact with adhesion
- Adhesion in the contact of a spherical indenter with a layered elastic half-space
- A simple method for solving adhesive and non-adhesive axisymmetric contact problems of elastically graded materials
- scientific article; zbMATH DE number 5243122
Cites Work
- Contact Mechanics
- Bio-inspired mechanics of reversible adhesion: orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials
- SETTLEMENT OF A STRIP LOAD ON A NON-HOMOGENEOUS ORTHOTROPIC INCOMPRESSIBLE ELASTIC HALF-SPACE
- Indentation of solids with gradients in elastic properties. I: Point force. II: Axisymmetric indentors
- PLANE STRAIN AND AXIALLY SYMMETRIC PROBLEMS OF A LINEARLY NONHOMOGENEOUS ELASTIC HALF-SPACE
- Two-dimensional contact analysis of elastic graded materials
- Orientation-dependent adhesion strength of a rigid cylinder in non-slipping contact with a transversely isotropic half-space
- Non-slipping adhesive contact of an elastic cylinder on stretched substrates
- Adhesion of elastic spheres
- The behaviour of an elastic non-homogeneous half-space. Part I-line and point loads
- Some results concerning displacements in a non-homogeneous elastic layer
- LINE AND POINT LOADS ON A NON-HOMOGENEOUS INCOMPRESSIBLE ELASTIC HALF-SPACE
- The behaviour of an elastic non-homogeneous half-space. Part II-circular and strip footings
- Adhesive behavior of two-dimensional power-law graded materials
- Mechanics of adhesive contact on a power-law graded elastic half-space
- Plane contact problem for a linearly-deformable foundation in the presence of adhesion
- A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric half-space
Cited In (4)
- Frictional contact of a rigid punch on an arbitrarily oriented gradient half-plane
- Two-dimensional adhesion mechanics of a graded coated substrate under a rigid cylindrical punch based on a PWEML model
- Thermo-contact mechanics of a rigid cylindrical punch sliding on a finite graded layer
- Adhesive behavior between dissimilar materials subjected to thermo-elastic loadings with normal-tangential coupling effect
This page was built for publication: Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q994643)
