Contact Mechanics

DOI10.1017/CBO9781139171731zbMath0599.73108OpenAlexW179372779MaRDI QIDQ3735235

No author found.

Publication date: 1985

Full work available at URL: https://doi.org/10.1017/cbo9781139171731

Nonlinear elasticity (74B20) Contact in solid mechanics (74M15) Research exposition (monographs, survey articles) pertaining to mechanics of deformable solids (74-02) Plastic materials, materials of stress-rate and internal-variable type (74C99) Free boundary problems for PDEs (35R35) Theories of friction (tribology) (74A55)

Related Items

Stability of a thin elastic film interacting with a contactor, On the relationship between ultrasonic and micromechanical properties of contacting rough surfaces, Bonded contact of a rigid disk inclusion with a penny-shaped crack in a transversely isotropic solid, Static frictional indentation of an elastic half-plane by a rigid unsymmetrical punch, A survey of models, analysis tools and compensation methods for the control of machines with friction, Pull-in instability of multi-phase nanocrystalline silicon beams under distributed electrostatic force, Contact radius and curvature corrections to the nonlocal contact formulation accounting for multi-particle interactions in elastic confined granular systems, Contact mechanics of a dilatant region located at a compressed elastic interface, Sliding adhesive contact of elastic solids with stochastic roughness, Small-scale indentation of an elastic coated half-space: the effect of compliant substrate, On the concept of ``far points in Hertz contact problems, Effect of temperature difference on the adhesive contact between two spheres, Brittle fracture under a sliding line contact, On the inversion of subsurface residual stresses from surface stress measurements, Contact of dissimilar elastic cylinders under normal and tangential loading, Determination of limiting radii of the contact area in axi-symmetric contact problems with frictional heat generation, Indentation of a thin compressible elastic layer: Approximate analytic and numerical solutions for rigid flat indenters, An analysis of fully plastic Brinell indentation, On the cold compaction of powders, Indentation with adhesion of a symmetrical punch into an elastic half-plane, Frictional contact problems with normal compliance, Flows in forward deformable roll coating gaps: Comparison between spring and plane-strain models of roll cover, A fast-moving heated half-cylinder over the surface of a half-space, Thermoelastic contact problems with frictional heating and convective cooling, Simplified solution for elliptical-contact problem with wear, The effects of wall and rolling resistance on the couple stress of granular materials in vertical flow, An optimal control approach to the analysis of inelastic structures under cyclic loading, An example of stick--slip and stick--slip--separation waves., BEM solution of two-dimensional unilateral contact problems with friction by a new approach., Atomistic simulations of elastic deformation and dislocation nucleation during nanoindentation., A set-valued force law for spatial Coulomb--Contensou friction., The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts., Three-dimensional frictionless contact between layered elastic bodies and incorporating sharp edges, The rigid punch problem with friction, The symmetrical adhesive contact problem for circular elastic cylinders, On the treatment of nonlinear unilateral contact problems, Measuring cam-follower performance, Discrete element modelling of pebble beds: with application to uniaxial compression tests of ceramic breeder pebble beds, A stabilized numerical solution for the dynamic contact of the bodies having very stiff constraint on the contact point, Damage analysis and dynamic response of elasto-plastic laminated composite shallow spherical shell under low velocity impact, Unloading of an elastic-plastic spherical contact under stick contact condition, A multi-model X-FEM strategy dedicated to frictional crack growth under cyclic fretting fatigue loadings, Miniaturized non-back-drivable mechanism for robotic applications, Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space, Novel approach for determining the optimal axial preload of a simulating rotary table spindle system, Modeling and calculation of slurry-chemistry effects on chemical-mechanical planarization with a grooved pad, Mass-plate impact parameters for the elastic range, Discrete-element modeling of particulate aerosol flows, Incorporation of contact for high-order finite elements in covariant form, A discrete element approach to evaluate stresses due to line loading on an elastic half-space, The influence of inertia forces on steady-state rolling contact, Fluid penetration effects in porous media contact, Some elasticity problems of a general anisotropic solid subjected to anti-plane loadings, Finite element modeling of elasto-plastic contact between rough surfaces, On the uniqueness of measuring elastoplastic properties from indentation: the indistinguishable mystical materials, A ``re-vitalized Greenwood and Williamson model of elastic contact between fractal surfaces, Unloading an elastic-plastic contact of rough surfaces, Simulation of impact involving an elastic rod, Axisymmetric frictionless contact of functionally graded materials, A formulation for frictionless contact problems using a weak form introduced by Nitsche, Determination of mechanical properties by instrumented indentation, Analysis of the plane contact with discontinuous curvature, A numerical analysis of partial slip problems under Hertzian contacts, Mechanics of indentation of plastically graded materials. I: Analysis, Bio-inspired mechanics of reversible adhesion: orientation-dependent adhesion strength for non-slipping adhesive contact with transversely isotropic elastic materials, Spherical indentation of incompressible rubber-like materials, Modeling and simulation of material removal with particulate flows, A slightly corrected Greenwood and Williamson model predicts asymptotic linearity between contact area and load, Computation of strongly coupled multifield interaction in particle-fluid systems, Impacts in multibody systems: modeling and experiments, Form defect influence on the shrinkage fit characteristics, Nucleation of dislocations beneath a plane strain indenter, Inelastic deformation and energy dissipation in ceramics: a mechanism-based constitutive model, Nonlinear resonances and self-excited oscillations of a rotor caused by radial clearance and collision, New Green's function for stress field and a note of its application in quantum-wire structures, Two-dimensional contact analysis of elastic graded materials, The tribology of rosin, A 3-D discrete-element method for dry granular flows of ellipsoidal particles, Adhesive contact of elastic-plastic spheres, A theoretical investigation of sharp indentation testing of a nearly-brittle material, with some experimental results, The first-kind and the second-kind boundary integral equation systems for solution of frictionless contact problems., Plasticity determined by indentation and theoretical plasticity of materials, On the contact width in generalized plain strain JKR model for isotropic solids, Plasticity in fretting contact, Approximate solution of the thermoelastic contact problem with frictional heating in the general case of the profile shape., Interactions between adhesion and friction. I: Theoretical aspects, Spherical particle sedimentation along an inclined plane at small Reynolds numbers, Particle simulation in contact mechanics of a bouncing elastic ball, Transient behavior of a few dies on an elastic half-space, On the super-Rayleigh/subseismic elastodynamic indentation problem, The restitution coefficient for a linear elastic rod., The use of particle simulation in contact mechanics., Numerical study of sliding wear caused by a loaded pin on a rotating disc, Fractal roughness in contact problems, On the sliding instabilities at rough surfaces, On deforming of a linear viscoelastic orthotropic half-space under the turning rigid cylindrical roller, Steady-state flow in classical elastoplasticity: Applications to repeated rolling and sliding contact, Scattering of a Rayleigh wave by a surface-breaking crack with faces in partial contact, Three-dimensional crack and contact problems with a general geometric configuration, On Brinell and Boussinesq indentation of creeping solids, A discrete element and ray framework for rapid simulation of acoustical dispersion of microscale particulate agglomerations, Analytical solution of the Cerruti problem under linearly distributed horizontal loads over polygonal domains, Micromechanical model for viscoelastic materials undergoing damage, Frictionless contact of an elastic punch subject to the normal load and bending moment, Tensionless contact of a finite circular plate, Two approaches for studying the impact response of viscoelastic engineering systems: an overview, The Boussinesq-Mindlin problem for a non-homogeneous elastic halfspace, Finite element simulation of dense wire packings, On the two-dimensional solution of both adhesive and non-adhesive contact problems involving functionally graded materials, Solution of wear problems for monotonic and periodic sliding with $p$-version of finite element method, 3D coupled field in a transversely isotropic magneto-electro-elastic half space punched by an elliptic indenter, A nonlinear, transient finite element method for coupled solvent diffusion and large deformation of hydrogels, Analysis of the effects of a pulsed electromagnetic field on the dynamic response of electrically conductive composites, A new solver for the elastic normal contact problem using conjugate gradients, deflation, and an FFT-based preconditioner, A discrete element based simulation framework to investigate particulate spray deposition processes, Investigation of particle damping mechanism via particle dynamics simulations, Energy absorption during compression and impact of dry elastic-plastic spherical granules, Stress response inside perturbed particle assemblies, Modelling and parameter re-identification of nanoindentation of soft polymers taking into account effects of surface roughness, On the dynamics of charged electromagnetic particulate jets, Fundamental solutions to Hertzian contact problems at nanoscale, A unified treatment of axisymmetric adhesive contact problems using the harmonic potential function method, Polymer indentation: numerical analysis and comparison with a spherical cavity model, The frequency response of dynamic friction: model comparisons, Interfacial separation between elastic solids with randomly rough surfaces: comparison between theory and numerical techniques, The method of characteristics in ideal plasticity problems, Contact stresses: a short survey of models and methods of computations, Sixty years of solid mechanics, Development of an asymptotic modeling methodology for tibio-femoral contact in multibody dynamic simulations of the human knee joint, The role of friction on sharp indentation, Predictive modeling of nanoindentation-induced homogeneous dislocation nucleation in copper, A model for chemical-mechanical polishing of a material surface based on contact mechanics, An accurate tangential force-displacement model for granular-flow simulations: contacting spheres with plastic deformation, force-driven formulation, A general solution of the axisymmetric contact problem for biphasic cartilage layers, Reissner-Sagoci problem for a homogeneous coating on a functionally graded half-space, On the undamped free vibration of a mass interacting with a Hertzian contact stiffness, Theory of indentation on multiferroic composite materials, Discrete contact mechanics of a fibrillar surface with backing layer interactions, An optimization approach for the Cauchy problem in linear elasticity, A study on wear evaluation of railway wheels based on multibody dynamics and wear computation, Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening, Analysis of repeated impacts on a steel rod with visco-plastic material behavior, Painlevé paradox during oblique impact with friction, Contact with stick zone between an indenter and a thin incompressible layer, Temperature gradient in wood during grinding, Elastic-plastic contact force history and response characteristics of circular plate subjected to impact by a projectile, Prediction of mechanical gear mesh efficiency of hypoid gear pairs, Frictional contact of anisotropic piezoelectric materials indented by flat and semi-parabolic stamps, Stability of slender beams and frames resting on 2D elastic half-space, Deformation of plastically compressible hardening-softening-hardening solids, Indentation of a compressible soft electroactive half-space: some theoretical aspects, Contact analysis in presence of spherical inhomogeneities within a half-space, Nanoindentation modeling of a nanodot-patterned surface on a deformable substrate, A simple approach for determining the preload of a wire race ball bearing, About brittle fracture in the vicinity of filled pores, Determination of constitutive response of plastically graded materials, New insight on acoustoplasticity - Ultrasonic irradiation enhances subgrain formation during deformation, Wedge indentation into elastic-plastic single crystals. I: Asymptotic fields for nearly-flat wedge, Energy-conserving contact interaction models for arbitrarily shaped discrete elements, On the continuous contact force models for soft materials in multibody dynamics, Modeling localized failure with arbitrary Lagrangian Eulerian methods, Frictionless elliptical contact of thin viscoelastic layers bonded to rigid substrates, An integral-equation formulation of nonlinear deformation in a stack of buffered plates, Stress field at a sliding frictional contact: experiments and calculations, Infinite boundary elements in 2D elasticity, Shape sensitivity analysis of composites in contact using the boundary element method, Mapping forces in a 3D elastic assembly of grains, A nonlocal contact formulation for confined granular systems, Riemann solutions and spacetime discontinuous Galerkin method for linear elastodynamic contact, The bound-constrained conjugate gradient method for non-negative matrices, Deformation of an elastic substrate due to a sessile drop, Conditions for the feasibility of multiple rolling for mechanical systems with multiple contact points, Seepage consolidation of elastic half-space under an axisymmetric load, Nonsmooth dynamics of a 3D rigid body on a vibrating plate, Simulation of rockfall trajectories with consideration of rock shape, A boundary element model for near surface contact stresses of rough surfaces, Application and experimental validation of new computational models of friction forces and rolling resistance, Anisotropic wear framework for 3D contact and rolling problems, Antiplane contact problems of a half-space with a semielliptic hole, The effects of anisotropic surface elasticity on the contact problem in an anisotropic material, Contact force and mechanical loss of multistage cable under tension and bending, The Mexican hat effect on the delamination buckling of a compressed thin film, Impact of an elastic pseudo-rigid body on a rigid foundation, Influence of a curvature discontinuity on the pressure distribution in two-dimensional frictionless contact problems, Axi-symmetric steady-state contact problem for thermo-sensible heated bodies, The axisymmetric contact problem of thermoelasticity in the presence of an internal heat source, On an invariance principle for unilateral contact at a bimaterial elastic interface, Models for contact loading and unloading of a rough surface, Frequency response of the axisymmetrically finite pre-stretched slab from incompressible functionally graded material on a rigid foundation, Stress analysis for multilayered coating systems using semi-analytical BEM with geometric non-linearities, Spring boundary model for a partially closed crack, Indentation of an elastic half space with material properties varying with depth, An analytical solution for the unloading in spherical indentation of elastic-plastic solids, Recent advancements in fractal geometric-based nonlinear time series solutions to the micro-quasistatic thermoviscoelastic creep for rough surfaces in contact, Effects of interfacial friction on flaw tolerant adhesion between two dissimilar elastic solids, Control of vibroimpact dynamics of a single-sided Hertzian contact forced oscillator, Using distributed contacts in DEM, Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact, Elastic contact stiffness and contact resistance for the Weierstrass profile, A simple numerical approach for solving the frictionless contact problem of elastic wavy surfaces, Small-scale indentation of an elastic coated half-space: influence of Poisson's ratios on the substrate effect, Minimization of stress state of a hub of friction pair, Dynamic behavior of a moving frictional punch over the surface of anisotropic materials, LCP method for a planar passive dynamic Walker based on an event-driven scheme, In-plane bending of Timoshenko beams in bilateral frictionless contact with an elastic half-space using a coupled FE-BIE method, On contact interaction between a moving massive body and a linear elastic half space, Stress distributions and stress intensity factors in ceramic roller bearing rings, A loading fractal prediction model developed for dry-friction rough joint surfaces considering elastic-plastic contact, Numerical investigation on the role of discrete element method in combined LBM-IBM-DEM modeling, Elasticity solutions for constant and linearly varying loads applied to a rectangular surface patch on the elastic half-space, A GPU-based discrete element modeling code and its application in die filling, Simulation of the quasi-static mechanics and scalar transport properties of ideal granular assemblages, Axisymmetric bodies of equal material in contact under torsion or shift, Pulse propagation in granular chains, Boundary face method for 3D contact problems with non-conforming contact discretization, Inverse contact problem for an elastic half-space, A surface-to-surface scheme for 3D contact problems by boundary face method, A coupled FE-BIE model for the static analysis of Timoshenko beams bonded to an orthotropic elastic half-plane, Boundary element analyses on the adhesive contact between an elastic sphere and a rigid half-space, Instrumented indentation of a non-equal biaxial prestretched hyperelastic substrate, Experimental and theoretical analyses of elastic-plastic repeated impacts by considering wave effects, A normal contact stiffness fractal prediction model of dry-friction rough surface and experimental verification, Debonding of FRP and thin films from an elastic half-plane using a coupled FE-BIE model, Spherical indentation of a transversely isotropic elastic half-space reinforced with a thin layer, Indentation of piezoelectromagneto-elastic half-space by a truncated conical punch, Numerical computation of free boundary problems in elastohydrodynamic lubrication, Numerical solving of frictionless contact problems in perfectly plastic bodies, Constitutive modelling for granular media using an anisotropic distortional yield model, Time-periodic solutions of driven-damped trimer granular crystals, Approximate modelling of resulting dry friction forces and rolling resistance for elliptic contact shape, Seepage consolidation under plane deformation of elastic half-space, The plane strain Young's modulus in cubic materials, Bulging brains, Periodic travelling waves and compactons in granular chains, Shock waves in dense granular flows down a chute, An abstract framework for a priori estimates for contact problems in 3D with quadratic finite elements, Overhanging of membranes and filaments adhering to periodic graph substrates, About the modeling of the indentation of a virus shell: the role of the shape of the probe, On oblique impact of a rigid rod against a Winkler foundation, A virtual element method for contact, A problem of unilateral contact of two hanging chains, Simulation of two-dimensional unilateral contact using a coupled FE/EFG method, Internal stress analysis for single and multilayered coating systems using the boundary element method, A boundary elements formulation for 3D fretting-wear problems, Frictionless contact of a rigid punch indenting an elastic layer having piezoelectric properties, Rolling contact problem for an orthotropic medium, A LAMMPS implementation of granular mechanics: inclusion of adhesive and microscopic friction forces, Simplified elastic wave modeling in seven-wire prestressed parallel strands, A continuous analysis method of planar rigid-body mechanical systems with two revolute clearance joints, A boundary element sensitivity formulation for contact problems using the implicit differentiation method, Efficient stress evaluation of stationary viscoelastic rolling contact problems using the boundary element method: application to viscoelastic coatings, Tribo-dynamic model and fatigue life analysis of spiral bevel gears, Fractal geometry-based hypergeometric time series solution to the hereditary thermal creep model for the contact of rough surfaces using the Kelvin-Voigt medium, A boundary element formulation for wear modeling on 3D contact and rolling-contact problems, Reassessing spherical indentation: contact regimes and mechanical property extractions, Modeling elasto-plastic indentation on layered materials using the equivalent inclusion method, Adhesion, slip, cohesive zones and energy fluxes for elastic spheres in contact, Stress analysis of three-dimensional contact problems using the boundary element method, Receding contact problem involving large displacements using the BEM, A general boundary element method approach to the solution of three-dimensional frictionless contact problems, Boundary element analysis of two-dimensional elastoplastic contact problems, The modelling of axisymmetric basal crack evolution in a borehole indentation problem, Using the boundary element method to solve rolling contact problems, A contact finite element formulation for biological soft hydrated tissues, Coupling of finite element and boundary element methods for study of the frictional contact problem, A stochastic model of rough surfaces for finite element contact analysis, Contact algorithm for nonlinear elastic problems with large displacements and friction using the boundary element method, Data-assisted CFD modeling of transient blast furnace tapping with a dynamic deadman, A coupled 3D isogeometric and discrete element approach for modeling interactions between structures and granular matters, Error estimates for a contact problem with the Tresca friction or the simplified Coulomb friction in elastic materials by the element-free Galerkin method, Alternating direction method of multiplier for the unilateral contact problem with an automatic penalty parameter selection, A phase-field approach to conchoidal fracture, Numerical solution of smooth and rough contact problems, Master-master frictional contact and applications for beam-shell interaction, Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials, The surface displacements of an elastic half-space subjected to uniform tangential tractions applied on a circular area, High-order mortar-based contact element using NURBS for the mapping of contact curved surfaces, Wave propagation across interfaces induced by different interaction exponents in ordered and disordered Hertz-like granular chains, On the indentation of a poroelastic halfspace, Regional characterization of the dynamic mechanical properties of human brain tissue by microindentation, Hertz theory and Carlson elliptic integrals, Traveling waves in trimer granular lattice. II: Asymptotic prediction of weakly attenuated pulses, Particulate immersed boundary method for complex fluid-particle interaction problems with heat transfer, Elasticity, fracture and yielding of cold compacted metal powders, An algorithm for compliant contact between complexly shaped bodies, FETI based algorithms for contact problems: Scalability, large displacements and 3D Coulomb friction, The relative contributions of propulsive forces and receptor-ligand binding forces during early contact between spermatozoa and zona pellucida of oocytes, Book review of: J. R. Barber, Contact mechanics, A regularized approach for frictional impact dynamics of flexible multi-link manipulator arms considering the dynamic stiffening effect, A finite strain contact model for mixed lubricated surfaces in forming processes, Discontinuous deformation analysis coupling with discontinuous Galerkin finite element methods for contact simulations, Local tangential contact of elastically similar, transversely isotropic elastic bodies, A dual Lagrange method for contact problems with regularized frictional contact conditions: modelling micro slip, Constitutive equations for anisotropic wear, The elastic response of a cohesive aggregate -- a discrete element model with coupled particle interaction., Self-similar problems of elastic contact for non-convex punches., Thermal and slip mechanism effects in rapid indentation by a flat punch, On oblique contact of creeping solids., Shape sensitivity analysis of large deformation frictional contact problems, A method for the evaluation of design limits for structural materials in a cyclic state of creep, Moving contact problems involving a rigid punch and a functionally graded coating, Elastic field prediction for a welding repaired material using a semi-analytical method, A semianalytical Hertzian frictional contact model in 2D, A systematic solution based on the half-space concept for modeling of thermoelastic contact between bodies defined by curved free boundaries, The size-dependent elastohydrodynamic lubrication contact of a coated half-plane with non-Newtonian fluid, Impact of force function formulations on the numerical simulation of centre-based models, Non-slipping JKR model for transversely isotropic materials, Conductance of rough random profiles, On the elastic moduli of three-dimensional assemblies of spheres: characterization and modeling of fluctuations in the particle displacement and rotation, Torsion of rough elastic half-space by rigid punch, Wedge indentation of thin films modelled by strain gradient plasticity, Analytical solution of the contact problem of a rigid indenter and an anisotropic linear elastic layer, Linear viscoelastic analysis of a semi-infinite porous medium, Normal and tangential compliances of interface of rough surfaces with contacts of elliptic shape, A computational study on the instrumented sharp indentations with dual indenters, Effect of strain hardening in elastic-plastic transition behavior in a hemisphere in contact with a rigid flat, Bounds for shakedown of cohesive-frictional materials under moving surface loads, On the conforming contact problem in a reinforced pin-loaded structure with a non-zero second Dundurs' constant, Frictional complete contacts between elastically similar bodies subject to normal and shear load, Asymptotic modeling of the impact of a spherical indenter on an elastic half-space, Material characterization by dual sharp indenters, Adhesive behavior of two-dimensional power-law graded materials, Asymptotic modelling of an elastic roller crossing a scratch, A computational procedure for the prediction of settlement in granular materials under cyclic loading, Nonlinear dynamics of three-dimensional belt drives using the finite element method, Experimental study of an impact oscillator with viscoelastic and Hertzian contact, Energy partitioning within a micro-particle cluster due to impact with a rigid planar wall, Statistical models of rough surfaces for finite element 3D-contact analysis, Sliding frictional contact analysis of functionally graded piezoelectric layered half-plane, Small and large scale granular statics, A contact force solution for non-colliding contact dynamics simulation, Two-dimensional sliding frictional contact of functionally graded materials, The effect of contact interface on dynamic characteristics of composite structures, Various contact approaches for the finite cell method, The dynamics of a body with an axisymmetric base sliding on a rough plane, The contact problem with the bulk application of intermolecular interaction forces (a refined formulation), The JKR-type adhesive contact problems for power-law shaped axisymmetric punches, Some basic questions on mechanosensing in cell-substrate interaction, AFM-based indentation stiffness tomography -- an asymptotic model, A stochastic description on the traction-separation law of an interface with non-covalent bonding, A path-independent integral for fracture of solids under combined electrochemical and mechanical loadings, Wave propagation in single column woodpile phononic crystals: Formation of tunable band gaps, Threshold fracture energy in solid particle erosion: improved estimate for a rigid indenter impacting an elastic medium, Combining vibrational linear-by-part dynamics and kinetic-based decoupling of the dynamics for multiple elastoplastic smooth impacts, Numerical solution of frictional contact problems based on a mortar algorithm with an augmented Lagrangian technique, A general approach to the solution of Boussinesq's problem for polynomial pressures acting over polygonal domains, Boundary value problems of plane elasticity involving orientations of displacements and tractions, Contact treatment in isogeometric analysis with NURBS, A variational principle for dynamic contact with large deformation, Contact conductance of rough surfaces composed of modified RMD patches, A simplified model for calculating hydrodynamic lubrication film thickness in elastoplastic line contacts, Discrete thermal element modelling of heat conduction in particle systems: Basic formulations, On computer implementation of the Hertz elastic contact model and its simplifications, Uzawa block relaxation domain decomposition method for the two-body contact problem with Tresca friction, Numerical calculation of wear in mechanical systems, Application of a wheel-rail contact model to railway dynamics in small radius curved tracks, Investigation of the relationship between primary and secondary shear bands induced by indentation in bulk metallic glasses, An approach for modeling long flexible bodies with application to railroad dynamics, A fast method for solving three-dimensional arbitrarily shaped inclusions in a half-space, Robust contact modeling using trimmed NURBS surfaces for dynamic simulations of articular contact, A finite element procedure for rigorous numerical enclosures on the limit load in the analysis of multibody structures, Elastohydrodynamics of the eyelid wiper, Contact problem for elastic spheres: applicability of the Hertz theory to non-small contact areas, Near surface stress analysis strategies for axisymmetric fretting, Micro and macro contact mechanics for interacting asperities, Cohesive, frictional powders: Contact models for tension, Size effects in indentation response of thin films at the nanoscale: a molecular dynamics study, Contact-aware simulations of particulate Stokesian suspensions, Axisymmetric frictionless contact problem of a functionally graded coating with exponentially varying modulus, Effect of a scratch on curved rail on initiation and evolution of plastic deformation induced rail corrugation, Hardness-packing density scaling relations for cohesive-frictional porous materials, A 3D FEM-BEM rolling contact formulation for unstructured meshes, A study on robust indentation techniques to evaluate elastic-plastic properties of metals, A solution method for the sub-surface stresses and local deflection of a semi-infinite inhomogeneous elastic medium, A Lagrange multiplier method for the finite element solution of frictionless contact problems, A seminumerical method for three-dimensional frictionless contact problems, Solid circular plate clamped along two antipodal edge arcs and deflected by a central transverse concentrated force, Predicting the coefficient of restitution of impacting elastic-perfectly plastic spheres, Indentation of a rigid sphere into an elastic half-space in the direction orthogonal to the axis of material symmetry, Influence of friction in material characterization in microindentation measurement, Contact laws between solid particles, Mechanics of adhesive contact on a power-law graded elastic half-space, Pair vs many-body potentials: influence on elastic and plastic behavior in nanoindentation of fcc metals, Body fitted link-cell algorithm for particulate flow simulation in curved pipeline domain, A fast nonlinear conjugate gradient based method for 3D concentrated frictional contact problems, Contact of rough surfaces: A simple model for elasticity, conductivity and cross-property connections, Thermoelastic contact mechanics for a flat punch sliding over a graded coating/substrate system with frictional heat generation, Indentation responses of piezoelectric films, Effective elastic modulus of film-on-substrate systems under normal and tangential contact, Micromechanics of pyramidal indentation in fcc metals: single crystal plasticity finite element analysis, On the accuracy of the Hertz model to describe the normal contact of soft elastic spheres, Contact problems for a plate as an inclusion in an elastic half-space, Nonstationary contact of a rigid body with an elastic medium: plane problem (review), Mechanics of sliding frictional contact for a graded orthotropic half-plane, Solution of three-dimensional crack problems by a finite perturbation method, Tuning coupled wave dispersion in a granular chain on a V-shaped rail, Set-valued anisotropic dry friction laws: formulation, experimental verification and instability phenomenon, Depth-sensing indentation of spherical particles on corrugated substrates -- an asymptotic model, Frictional contact analysis of sliding joints with clearances between flexible beams and rigid holes in flexible multibody systems, Oscillation of a punch moving on the free surface of an elastic half-space, On the nonsmooth dynamics of towed wheels, Analysis of 2D contact problems under cyclic loads using IGABEM with Bézier decomposition, Numerical simulation of influence of surface features on the elastohydrodynamic lubrication of sliding line contact using Krylov subspace method, Contact mechanics for dynamical systems: a comprehensive review, A multi-scale stiffness fractal model of joint interfaces, A new analytical model for the flattening of Gaussian rough surfaces, Stochastic P-bifurcation analysis of a novel type of unilateral vibro-impact vibration system, The nonsmooth dynamics of combined slip and spin motion under dry friction, Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch, Modeling and inverse identification method for the characterization of elastic-plastic contact behavior during flat punch indentation, Subharmonic bifurcation for a non-smooth double pendulum with unilateral impact, A Fourier-accelerated volume integral method for elastoplastic contact, An accurate geometric contact force model for super-quadric particles, A strong form meshfree collocation method for frictional contact on a rigid obstacle, Numerical method for solution of pointwise contact between surfaces, Shear to longitudinal mode conversion via second harmonic generation in a two-dimensional microscale granular crystal, A dual pass mortar approach for unbiased constraints and self-contact, Varying-order NURBS discretization: an accurate and efficient method for isogeometric analysis of large deformation contact problems, A modified Hertz model for finite spherical indentation inspired by numerical simulations, Traveling waves in trimer granular lattice. I: Bifurcation structure of traveling waves in the unit-cell model, Contact stiffness of regularly patterned multi-asperity interfaces, Analysis of the wheel and rail frictionless normal contact considering material parameters, Complete solutions of three-dimensional problems in transversely isotropic media, An equivalent indentation method for the external crack with a Dugdale cohesive zone, A Newton-like algorithm to solve contact and wear problems with pressure-dependent friction coefficients, Boundary conditions for modeling the impact of wheels on railway track, On the Kelvin, Boussinesq, and Mindlin problems, A new model of the contact force for the collision between two solid bodies, A boundary elements only solution method for 3D micropolar elasticity, Coulomb friction with rolling resistance as a cone complementarity problem, The contact problem with the bulk application of intermolecular interaction forces: influence function for an inhomogeneous elastic half-space, Periodic contact problem for a surface with two-scale waviness, Estimation of impact forces during multi-point collisions involving small deformations, Optimizing wheel profiles and suspensions for railway vehicles operating on specific lines to reduce wheel wear: a case study, Influence of the long-range forces in non-Gaussian random-packing dynamics, Axisymmetric thermoelastic contact of an FGM-coated half-space under a rotating punch, Euler angles and numerical representation of the railroad track geometry, Modelling tangential contact problem with surface stress, The influence of 2D periodic surface texture on the partial slip problem for elastic bodies, Dynamic contact response of an elastic sphere on a piezoelectric half-space, A finite volume penalty based segment-to-segment method for frictional contact problems, Nanomanipulation of elliptic and cubic nanoparticles with consideration of the impact theories, Mathematical models for characterizing non-Hertzian contacts, Discrete convolution and FFT modified with double influence-coefficient superpositions (DCSS-FFT) for contact of nominally flat heterogeneous materials involving elastoplasticity, An effective method for calculating elasto-plastic contact pressure and contact patch size under elliptical, circular and line contact conditions, Collisional SPH: a method to model frictional collisions with SPH, A Galerkin/hyper-reduction technique to reduce steady-state elastohydrodynamic line contact problems, Research on mechanism and control methods of carbody chattering of an electric multiple-unit train, Modelling of the hysteretic bending behavior for helical strands under multi-axial loads, A refined analytical model for the mesh stiffness calculation of plastic gear pairs, Hydrodynamic lubrication in fully plastic asperity contacts, Effect of contact stiffness modulation in contact-mode AFM under subharmonic excitation, A self-consistent model for the elastic contact of rough surfaces, An approximate numerical method for solving Cauchy singular integral equations composed of multiple implicit parameter functions with unknown integral limits in contact mechanics, Comments on the paper by G. P. Cherepanov ``The contact problem of the mathematical theory of elasticity with stick and slip areas. The theory of rolling and tribology, High accuracy complete elliptic integrals for solving the Hertzian elliptical contact problems, A note on the foreshortening effect of a flexible beam under oblique excitation, Experimental and theoretical investigation of the energy dissipation of a rolling disk during its final stage of motion, Impact of an elastic rod on a deformable barrier: Analytical and numerical investigations on models of a valve and a rod-shaped stamping tool, A comparison of the $h$-, $p$-, $hp$-, and $rp$-version of the FEM for the solution of the 2D Hertzian contact problem, Boundary integral equation method for conductive cracks in two and three-dimensional transversely isotropic piezoelectric media, Failure of cemented granular materials under simple compression: experiments and numerical simulations, Goddard rattler-jamming mechanism for quantifying pressure dependence of elastic moduli of grain packs, An energy-conserving contact theory for discrete element modelling of arbitrarily shaped particles: basic framework and general contact model, Modeling connected granular media: particle bonding within the level set discrete element method, Curvilinear virtual elements for contact mechanics, Numerical study on the response scenarios in a vibro-impact single-degree-of-freedom oscillator with two unilateral dissipative and deformable constraints, B.E.M. applied to receding contact problems with friction, The contact problem with the bulk application of intermolecular interaction forces: the influence function for an elastic `layer-half-space' system, The contact problem with the bulk application of intermolecular interaction forces: distinctive features of the subsurface stresses, On the influence of failure on the dynamics of mechanical systems, A dynamic model of polyethylene damage in dry total hip arthroplasties: wear and creep, Contact characteristics of viscoelastic bonded layers, Modeling three-dimensional surface-to-surface rigid contact and impact, Localized stress percolation through dry masonry walls. I: Experiments, Localized stress percolation through dry masonry walls. II: Modelling, Contact of a rigid cylinder indenting an elastic layer sliding over a rigid substrate, Axisymmetric contact problem for a biphasic cartilage layer with allowance for tangential displacements on the contact surface, Rolling contact mechanics of graded coatings involving frictional heating, Adiabatic heating effect in elastic-plastic contraction/expansion of spherical cavity in isotropic incompressible material, Improper double integrals with a logarithmic kernel calculated by methods of elasticity theory, An asymptotic model for a thin bonded elastic layer coated with an elastic membrane, A general principle for spontaneous genetic symmetry breaking and pattern formation within cell populations, Dynamic contact behaviours involving crystalline diamond nanospheres, Symmetric and asymmetric multiple impulsive constraints without friction and their characterization, Compound modification of globoidal worm drive with variable parameters, Shaft-hub press fit subjected to bending couples: analytical evaluation of the shaft-hub detachment couple, Analysis of the tilted shallow wedge problem in couple-stress elasticity, Detailed wheel/rail geometry processing with the conformal contact approach, Dynamic force transmissibility of flywheel rotor systems supported by angular contact ball bearings considering clearance fit, Flexible multibody impact simulations based on the isogeometric analysis approach, On a class of generalized saddle-point problems arising from contact mechanics, Asymmetric propagation of acoustic waves in a conical granular chain, Delamination in GLARE laminates subjected to oblique low velocity impact considering friction, Virtual element methods for engineering applications, Gravitational settling of a cell on a high-aspect-ratio nanostructured substrate -- an asymptotic modeling approach, Cylindrical indentation in micropolar elasticity, Stable node-based smoothed finite element method for 3D contact problems, Size-dependent contact mechanics via boundary element analysis, The mechanics of decompressive craniectomy: bulging in idealized geometries, Thermoelastic contact with Barber's heat exchange condition, A receding contact problem between a functionally graded layer and two homogeneous quarter planes, Micro-macro scale instability in 2D regular granular assemblies, Contact problems for a finitely deformed incompressible elastic halfspace, Nonholonomic motions of gyroscopic and wheeled systems, A receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate, Quasi-static normal indentation of an elasto-plastic substrate by a periodic array of elastic strip punches, The thermoelastic Hertzian contact problem, An accurate elasto-plastic frictional tangential force-displacement model for granular-flow simulations: displacement-driven formulation, An efficient finite/discrete element procedure for simulating compression of 3D particle assemblies, Duality applied to contact problems with friction, Elasto-plastic statistical model of strongly anisotropic rough surfaces for finite element 3D contact analysis, Mathematical modelling of layered contact mechanics of cam-tappet conjunction, Modeling railroad track structures using the finite segment method, Thermo-contact mechanics of a rigid cylindrical punch sliding on a finite graded layer, A survey on dual decomposition methods, Nonlinear resonances leading to strong pulse attenuation in granular dimer chains, Interaction of several bodies as applied to solving tribo-fatigue problems, Numerical and experimental studies on impact dynamics of a planar flexible multibody system, Plane problem of filtration consolidation for an elastic half-space with discontinuous initial conditions, The relation between a microscopic threshold-force model and macroscopic models of adhesion, Multiscale aircraft fuselage fatigue analysis by the dual boundary element method, Modeling of ultra-high-speed impact at the surface of an elastic half-space, Mesh and model adaptivity for frictional contact problems, Mechanics of axisymmetric wavy surface adhesion: JKR-DMT transition solution, Orientation-dependent adhesion strength of a rigid cylinder in non-slipping contact with a transversely isotropic half-space, Conical indentation of incompressible rubber-like materials, The effect of contact conditions and material properties on plastic yield inception in a spherical shell compressed by a rigid flat, A new reverse analysis to determine the constitutive response of plastically graded case hardened bearing steels, Response of a wire rope strand to axial and torsional loads: asymptotic modeling of the effect of interwire contact deformations, Improved reverse analysis for material characterization with dual sharp indenters, Thermally induced local slip of contacting solids in vicinity of surface groove, Nanoprobing fracture length scales, The periodic contact problem of the plane theory of elasticity. Taking friction, wear and adhesion into account, Application of contact theory to evaluation of elastic properties of low consolidated porous media, Multiple cracks in a half-space under contact loading, A contact analysis approach based on linear complementarity formulation using smoothed finite element methods, Contact with friction of a rigid cylinder with an elastic half-space, Hertz contact at finite friction and arbitrary profiles, Separated steady state solutions for two thermoelastic half-planes in contact with out-of-plane sliding, Plasticity in polycrystalline fretting fatigue contacts, Crack propagation in glass coatings under expanding spherical contact, Elastic and viscoelastic indentation of flat surfaces by pyramid indentors, Non-slipping adhesive contact between mismatched elastic spheres: A model of adhesion mediated deformation sensor, Adhesion in the contact of a spherical indenter with a layered elastic half-space, Railway train-track dynamics for wheelflats with improved contact models, An inertial reference frame method for the simulation of the effect of longitudinal force to the dynamics of railway wheelsets, Elastoplastic phenomena in multibody impact dynamics, Covariant description of contact interfaces considering anisotropy for adhesion and friction. II: Linearization, finite element implementation and numerical analysis of the model, Finite element and boundary element contact stress analysis with remeshing technique, On the elastic moduli of two-dimensional assemblies of disks: Relevance and modeling of fluctuations in particle displacements and rotations, Conical indentation of strain-hardening solids, On the analytical approach to Galin's stick-slip problem. A survey, Thermal relaxation effects in rapid sliding contact with friction, A stress scale in full-field identification procedures: a diffuse stress gauge, A priori error estimates and an inexact primal-dual active set strategy for linear and quadratic finite elements applied to multibody contact problems, On the contact of a rigid sphere and a thin plate, Extension of the linear matching method to geotechnical problems, Torsion of viscoelastic spheres in contact, Performance and robustness analysis of a Hardware in the Loop full-scale roller-rig for railway braking and traction testing, TRT: thermo racing tyre -- a physical model to predict the tyre temperature distribution, An innovative degraded adhesion model for railway vehicles: development and experimental validation, Stress state of two collinear stamps over the surface of orthotropic materials, The shifted penalty method, A new universal approximate model for conformal contact and non-conformal contact of spherical surfaces, Axisymmetric torsional fretting contact between a spherical punch and an FGPM coating, Transient impact response analysis of an elastic-plastic beam, Unresolved CFD-DEM modeling of multiphase flow in densely packed particle beds, Boundary element formulation of axisymmetric problems for an elastic halfspace, A stochastic dynamic model of train-track-bridge coupled system based on probability density evolution method, A note on the crack analogue fretting fatigue model with varying normal load, Dynamic modeling of a gear transmission system containing damping particles using coupled multi-body dynamics and discrete element method, On a simple oscillator problem describing ice-induced vibrations of an offshore structure, Grasping torque optimization for a dexterous robotic hand using the linearization of constraints, An extended JKR model for adhesion of a rigid sphere on a supported compressible elastic thin layer, Cylindrical indentation of an elastic bonded layer with surface tension, An elastoplastic energy model for predicting the deformation behaviors of various structural components, On progressive blast envelope evolution of charged particles in electromagnetic fields, Towards stochastic discrete element modelling of spherical particles with surface roughness: a normal interaction law, A generic contact detection framework for cylindrical particles in discrete element modelling, A frictional contact algorithm for implicit material point method, Contact between spheres and general surfaces, A component-based hybrid reduced basis/finite element method for solid mechanics with local nonlinearities, Numerical-analytical model for transient dynamics of elastic-plastic plate under eccentric low-velocity impact, A solution approach for contact problems based on the dual interpolation boundary face method, Laser-induced heating of dynamic particulate depositions in additive manufacturing, Response of an infinite beam resting on the tensionless Winkler foundation subjected to an axial and a transverse concentrated loads, Active detumbling technology for high dynamic non-cooperative space targets, Nonlinear response of a beam under distributed moving contact load, Contact mechanics of two elastic spheres reinforced by functionally graded materials (FGM) thin coatings, Rolling without slip on a transversely isotropic thermoelastic half-space, Effects of surface tension and Steigmann-Ogden surface elasticity on Hertzian contact properties, The tilted shallow wedge problem, Dynamics and control of capture of a floating rigid body by a spacecraft robotic arm, An efficient and reliable residual-type a posteriori error estimator for the Signorini problem, The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion, Size-dependent sharp indentation. I: A closed-form expression of the indentation loading curve, A probabilistic model for predicting the uncertainties of the humid stiction phenomenon on hard materials, Solutions of the generalized half-plane and half-space Cerruti problems with surface effects, A study of the residual stress induced by shot peening for an isotropic material based on prager's yield criterion for combined stresses, Unnamed Item, NONLINEAR WAVES IN NEWTON'S CRADLE AND THE DISCRETE p-SCHRÖDINGER EQUATION, Enhanced Stability of Coherently Strained Conical Quantum Dot Arrays Against Coarsening: Beyond the Small Slope Assumption, Implementation of the Jäger contact model for discrete element simulations, Polyarc discrete element for efficiently simulating arbitrarily shaped 2D particles, APPLICATION OF A SPLITTING FRACTURE MODEL TO THE SIMULATION OF ROCK INDENTATION SUBSURFACE FRACTURES, A new boundary element approach for contact problems with friction, COMPUTATIONAL CONTACT MECHANICS BASED ON THE rp-VERSION OF THE FINITE ELEMENT METHOD, Guaranteed Upper and Lower Bounds on the Uniform Load of Contact Problems in Elasticity, The Cerruti problem in dipolar gradient elasticity, A parallel finite element contact/impact algorithm for non‐linear explicit transient analysis: Part I—The search algorithm and contact mechanics, The rolling suitcase instability: a coupling between translation and rotation, Effect of an elastic substrate on buckling of free-standing nanocolumns, Aspects of Contact Problems in Computational Multibody Dynamics, Ideal characterizations of multiple impacts: A frame–independent approach by means of jet–bundle geometry, An efficient and robust contact algorithm for a compliant contact force model between bodies of complex geometry, Static analysis of Timoshenko beam resting on elastic half-plane based on the coupling of locking-free finite elements and boundary integral, Development of discrete contact mechanics with applications to study the frictional interaction of deformable bodies, On effects of spinning moments on wheeled vehicle skidding, Sliding and Crossing Dynamics in Extended Filippov Systems, Statistical model of strongly anisotropic rough surfaces for finite element contact analysis, Uniqueness and stability of the solution to a thermoelastic contact problem, A multi-scale FEM-BEM formulation for contact mechanics between rough surfaces, On friction problems with normal compliance, Effect of dusty particles on Darcy-Brinkman gravity-driven ferro-thermal-convection in a ferrofluid saturated porous layer with internal heat source: influence of boundaries, Nichtlineare Schwingungen mechanischer Strukturen mit Füge‐oder Kontaktstellen, A computational framework for well production simulation: coupling steady state Darcy flow and channel flow by SGBEM-FEM, Fast FE-BEM algorithms for orthotropic frictional contact, A new algorithm for contact detection between spherical particle and triangulated mesh boundary in discrete element method simulations, Computational homogenization of soft matter friction: Isogeometric framework and elastic boundary layers, An unbiased computational contact formulation for 3D friction, DEM-enriched contact approach for material point method, Supersonic and subsonic stages of dynamic contact between bodies, Elastic–plastic contact of a rough surface with Weierstrass profile, Different weak FE-formulations for 2-D frictionless Large Deformation Contact based on the Mortar Method, Analysis of indentation of a 3m trigonal piezoelectric half-plane under a smooth insulating punch, Contact Impact Forces at Discontinuous 2-DOF Vibroimpact, On the effective medium model of the interaction of Rayleigh waves with mass-spring oscillators on the surface, Dynamic simulation analysis and experimental study of an industrial robot with novel joint reducers, Influence of Inclined Angles on the Stability of Inclined Granular Flows Down Rough Bottoms, Influence of nonlinear spatial distribution of stress and strain on solving problems of solid mechanics, Effect of Poisson's ratio on the indentation of open cell foam, Adhesive behavior between dissimilar materials subjected to thermo-elastic loadings with normal-tangential coupling effect, An adhesion study in Ni and Cu nanocontacts from a molecular dynamics perspective, Capillary adhesion of elastic bodies under the conditions of partial slip, Algorithm for solving discrete contact problems for an elastic strip, On the contact problem for a wavy cylinder and an elastic half-plane, Specific features of the contact interaction and wear of thin-walled structural elements, Algorithm for solving discrete contact problems for an elastic layer, DEM-CFD Modelling of Electrostatic Phenomena in Fluidization, Rolling droplets, Experiments on the motion of a solid sphere toward a wall: From viscous dissipation to elastohydrodynamic bouncing, Drop impact of yield-stress fluids, Unnamed Item, An ellipsoidal cap model for adhesion of a soft particle on a rigid substrate, An exact dual-integral formulation of the indentation of finite, free-standing, end-supported adhesive elastic layers, Adhesive contact problems for a thin elastic layer: Asymptotic analysis and the JKR theory, Unnamed Item, Soft lubrication: The elastohydrodynamics of nonconforming and conforming contacts, A blade-coating study using a finite-element simulation, The problem of constrained impact, REGULAR AND CHAOTIC DYNAMICS IN BOUNCING BALL MODELS, Effect of surface bending and stress on the transmission of line force to an elastic substrate, Pressure-dependent elastic moduli of granular assemblies, A finite element method for elasto-plastic structures and contact problems by parametric quadratic programming, Computer-aided Nonlinear Vehicle-bridge Interaction Analysis, Frictional contact of laminated elastic half-spaces allowing interface cavities. Part 1: Analytical treatment, Initial moduli of particulated mass with frictional contacts, Asymptotic theory of the elastohydrodynamic adhesion and gliding motion of a solid particle over soft and sticky substrates at low Reynolds numbers, A contact mechanics model for quasi-continua, Application of the interior‐point method to shakedown analysis of pavements, Fabric evolution of granular assembly underK0 loading/unloading, An inversion method for identification of elastoplastic properties for engineering materials from limited spherical indentation measurements, Finite deformation frictional mortar contact using a semi-smooth Newton method with consistent linearization, Three-dimensional modelling and simulation of magnetorheological fluids, Elastohydrodynamics of a sliding, spinning and sedimenting cylinder near a soft wall, Simulation of surface pitting due to contact loading, Modelling of unilateral constraints using power-based restriction functions within Lagrangian mechanics, Using Nesterov's Method to Accelerate Multibody Dynamics with Friction and Contact, Criteria for static equilibrium in particulate mechanics computations, Analysis of the Stress-Strain State of a Body Under the Action of Rigid Punches of Different Shapes, A novel method for integrating first- and second-order differential equations in elastohydrodynamic lubrication for the solution of smooth isothermal, line contact problems, NCP Function--Based Dual Weighted Residual Error Estimators for Signorini's Problem, Comparison of Analytical and Experimental Results for Longitudinal Impacts on Elastic Rods, Variationally consistent discretization schemes and numerical algorithms for contact problems, An efficient method in the 2D problem on transient oscillations of the elastic half-space interacting with a rigid structure, Contact mechanics at the nanoscale, a 3D multiscale approach, On impinging near‐field granular jets, TANGENS HYPERBOLICUS APPROXIMATIONS OF THE SPATIAL MODEL OF FRICTION COUPLED WITH ROLLING RESISTANCE, On a multilaminate model for soil incorporating small strain stiffness, Compliant grasping with passive forces, An efficient numerical method for the solution of sliding contact problems, A 3D beam-to-beam contact finite element for coupled electric-mechanical fields, Micromechanical analysis of failure propagation in frictional granular materials, Adhesive elastic plastic contact: theory and numerical simulation, Unnamed Item, Friction and Wear at Tractive Rolling of Cylinders, Singularities in differential‐algebraic systems with unilateral constraints, Apporoximation of contact geometry in the dynamical simulation of wheel-rail, Active suspensions in thin films: nutrient uptake and swimmer motion, Exploring the non-linear oscillation of a rigid sphere on an elastic half-space, Variational approach for nonsmooth elasto-plastic dynamics with contact and impacts, Eulerian framework for contact between solids represented as phase fields, Mechanical modelling the slider‐substrate system with account of sliding, Axisymmetric wetting of a liquid droplet on a stretched elastic membrane, A three-dimensional fractal contact model of rough surfaces considering strain hardening, Modelling and experimental investigation of capsule-tumour contact for early bowel cancer detection, Elastic indentation of a rough surface by a conical punch, The discretization method and multi-contact force model on 3D cylindrical clearance joint for multibody dynamics of spatial mechanical system, A variationally consistent contact formulation based on a mixed interpolation point method and isogeometric discretization, A displacement‐driven approach to frictional contact mechanics, Ludwig Föppl and Gerhard Schubert: Unknown classics of contact mechanics, Theoretical basis for evaluating the deformability of rock blocks, Mechanics of heterogeneous adhesive contacts, Couple stress-based flexoelectricity of frictionless contact in dielectrics, Analytic contact solutions of the Boussinesq and Cattaneo problems for an ellipsoidal power-law indenter, A computational framework for crack propagation along contact interfaces and surfaces under load, Signed distance field enhanced fully resolved CFD-DEM for simulation of granular flows involving multiphase fluids and irregularly shaped particles, Plane contact problems for an elastic foundation with two bedding coefficients, Frictional continuous contact problem of thermoelectric materials loaded by a rigid indenter, Internal stresses in an elastic half-space under discrete contact conditions, Characteristic material behaviors in conical indentation with friction, Robotic grasp analysis using deformable solid mechanics, A neural network finite element method for contact mechanics, Capillary-lubrication force exerted on a two-dimensional particle moving towards a thin fluid film, Revisiting the theory behind AFM indentation procedures. Exploring the physical significance of fundamental equations, Development of an improved mathematical model for the dynamic response of a sphere located at a viscoelastic medium interface, A contact formulation based on localized Lagrange multipliers: formulation and application to two-dimensional problems, The Relationship Between the Laws of Conservation of Energy and Momentum for Low Speed Impact of Several Bodies, The harmonic motion of a rigid cylinder on an elastic half-space, SOME EXAMPLES OF THE METHOD OF FINITE SPHERES WITH ENRICHMENT, An Optimized Material Removal Process, Contact Analysis Within the Bi-Potential Framework Using Cell-Based Smoothed Finite Element Method, Unnamed Item, Unnamed Item, Spin coating of a colloidal suspension, Planar collapse of a granular column: Experiments and discrete element simulations, Newton’s cradle undone: Experiments and collision models for the normal collision of three solid spheres, Flowing grains in an inclined duct, Vibration Damping by Friction Forces: Theory and Applications, A model and numerical investigation for rolling metal process using continuous finite element discretizations, A. Yu. Ishlinskii's researches in the field of rolling friction and their development, The axisymmetric contact problem taking into account transient heat production due to sliding friction, Rheology of a granular system with capillary interactions, Emerging Spatial and Temporal Discretization Methods in Contact and Impact Mechanics, Reliability of Micromechanical Contact Models: a Still Open Issue, A cell-based smoothed finite element method for multi-body contact analysis within the bi-potential formulation, Linear instability of electromagnetic viscoelastic nanofluid: analytical and numerical study, Impact of a rigid sphere with an infinite Kirchhoff-Love plate taking into account bulk and shear relaxation, \textit{SudoDEM}: Unleashing the predictive power of the discrete element method on simulation for non-spherical granular particles, Small oscillations of a rigid sphere on an elastic half space: a theoretical analysis, Discrete element modeling of selective laser sintering additive manufacturing processes, The discrete contact problem for a two-level system of indenters, Development of a semi‐implicit contact methodology for finite volume stress solvers, New benchmark problems for verification of the curve‐to‐surface contact algorithm based on the generalized Euler–Eytelwein problem, The extension of the method of dimensionality reduction to non‐compact and non‐axisymmetric contacts, Modeling of volumetric damage of multielement clamp‐knife‐base tribo‐fatigue system, Elastohydrodynamic lubrication line contact in couple-stress elasticity, Finite element method–discrete element method bridging coupling for the modeling of gouge, Frictionless Signorini's contact problem for hyperelastic materials with interior point optimizer, A finite volume penalty‐based implicit procedure for the treatment of the frictionless contact boundaries, Improving the robustness of non-Hertzian wheel-rail contact model for railway vehicle dynamics simulation, A multi-physics material point method for thermo-fluid-solid coupling problems in metal additive manufacturing processes, Two‐dimensional analysis of the fully coupled rolling contact problem between a rigid cylinder and an orthotropic medium, 3D thermoelastic solids under non‐linear interface thermal and orthotropic frictional contact conditions, Generalized surface Green's functions for an elastic half-space, Hierarchical refinement in isogeometric analysis for flexible multibody impact simulations, A method of coating analysis based on cylindrical indenter loading on coated structure, Regularized frictional contact problems with the interior point method, A novel approximate method to calculate the force applied on an elastic half space by a rigid sphere, Contact detection algorithms for three‐dimensional ellipsoids in discrete element modelling, A lattice type model for particulate media, Viscous dissipation in the collision between a sphere and a textured wall, Traveling waves and conservation laws for highly nonlinear wave equations modeling Hertz chains, A semianalytical and finite-element solution to the unbonded contact between a frictionless layer and an FGM-coated half-plane, An ill-posed Cauchy type problem for an elastic strip, Numerical calculation of the elastic field in a half-space using bilinear elements, Flamant solution of a half-plane with surface flexural resistibility and its applications to nanocontact mechanics, Integral equations in direct and inverse problems of elastostatics for crack detection in layered structures, Adhesion of an elastic sphere on a tensioned membrane, Surface deformation and rebound for normal single-particle collisions in a surrounding fluid, Unnamed Item, Unnamed Item, Charge-induced clustering in multifield particulate flows, Two dimensional mortar contact methods for large deformation frictional sliding, Symmetry preserving algorithm for large displacement frictionless contact by the pre‐discretization penalty method, Constitutive properties of contacting materials with a finite-sized microstructure, Characteristic Length and Time Scales Associated with the Impact of an Elasto-plastic Particle with a Large Hard Plane Surface, Oblique Impacts and Rebounds of Lennard-Jones Clusters on Solid Surfaces, Computationally generated constitutive models for particle phase rheology in gas-fluidized suspensions, On Differential Equations with Codimension-$n$ Discontinuity Sets, Coupled flow and deformation fields due to a line load on a poroelastic half space: effect of surface stress and surface bending, Validity of Winkler’s mattress model for thin elastomeric layers: beyond Poisson’s ratio, Unnamed Item, Conservative discretization of contact/impact problems for nearly rigid bodies, On the existence and uniqueness of steady state solutions in thermoelastic contact with frictional heating, Three-dimensional analytical solutions for shakedown of cohesive-frictional materials under moving surface loads, A numerical model for flexible pavements rut depth evolution with time, Initial deformation about convex surfaces formed from identical, rough elastic-plastic bodies which approach along their normal at first contact, Enrichment of the method of finite spheres using geometry‐independent localized scalable bubbles, The linear matching method for the shakedown analysis of geotechnical problems, Computer simulation of the interaction between a wheel and a corrugated rail, Incipient sliding of rough surfaces in contact: A multiscale numerical analysis, Transmission of stress in granular materials as a problem of statistical mechanics, Dynamics of nanoscale pattern formation of an epitaxial monolayer, Dense flows of cohesive granular materials, Edge effect on elastic-plastic rolling/sliding contacts, Метод нелинейных граничных интегральных уравнений для решения квазистатической контактной задачи о взаимодействии упругих тел при наличии кулонова трения, A direct constraint-Trefftz FEM for analysing elastic contact problems, Unnamed Item, A modelling approach for the nonlinear dynamics of assembled structures undergoing fretting wear, Lubrication of soft viscoelastic solids, Flow rate–pressure drop relation for deformable shallow microfluidic channels, Evolution of Pulse and Periodic Elastic Waves in Media with Quadratically-Bimodular Nonlinearity, Dry-Friction Damping in Vibrating Systems, Theory and Application to the Bladed Disc Assembly, Automatic numerical determination of peening stress from objective shape, A double-Hertz model for adhesive contact between cylinders under inclined forces, Multigrid with FFT smoother for a simplified 2D frictional contact problem, Traveling fronts in dissipative granular chains and nonlinear lattices, A FULL MULTIGRID METHOD FOR LINEAR COMPLEMENTARITY PROBLEMS ARISING FROM ELASTIC NORMAL CONTACT PROBLEMS, EXTENDING THE BEM FOR ELASTIC CONTACT PROBLEMS BEYOND THE HALF-SPACE APPROACH, ANALYSIS OF THE UNILATERAL CONTACT PROBLEM FOR BIPHASIC CARTILAGE LAYERS WITH AN ELLIPTIC CONTACT ZONE AND ACCOUNTING FOR TANGENTIAL DISPLACEMENTS, Linear and nonlinear dynamics of isospectral granular chains, Unnamed Item, Unnamed Item