Modeling and inverse identification method for the characterization of elastic-plastic contact behavior during flat punch indentation
DOI10.1016/J.EUROMECHSOL.2022.104663zbMATH Open1502.74079OpenAlexW4281624139MaRDI QIDQ2168376FDOQ2168376
Authors: Yanyan Li 
Publication date: 31 August 2022
Published in: European Journal of Mechanics. A. Solids (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.euromechsol.2022.104663
Recommendations
- An inversion method for identification of elastoplastic properties for engineering materials from limited spherical indentation measurements
- Material model calibration by indentation, imprint mapping and inverse analysis
- Assessment of elastic-plastic material parameters comparatively by three procedures based on indentation and inverse analysis
- Investigation of sharp contact at rigid-plastic conditions.
- On the determination of elastic coefficients from indentation experiments
finite element methodoptimization schemediscrete interfacial stress modeldisplacement-based yield criterionfrictional flat punch condition
Contact in solid mechanics (74M15) Finite element methods applied to problems in solid mechanics (74S05) Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials) (74C05) Friction in solid mechanics (74M10) Optimization of other properties in solid mechanics (74P10) Inverse problems in equilibrium solid mechanics (74G75)
Cites Work
- Contact Mechanics
- A combined analytic and experimental study of the displacement field in a circular ring
- An Interior Point Algorithm for Large-Scale Nonlinear Programming
- An analytical solution for a linear viscoelastic layer loaded with a cylindrical punch: evaluation of the rebound indentation test with application for assessing viability of articular cartilage
- Theory of moving contact of anisotropic piezoelectric materials via real fundamental solutions approach
- A Primal-Dual Interior-Point Method for Nonlinear Programming with Strong Global and Local Convergence Properties
- Wedge indentation into elastic-plastic single crystals. I: Asymptotic fields for nearly-flat wedge
- Stress field at a sliding frictional contact: experiments and calculations
- Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
- Transient thermo-electro-elastic contact analysis of a sliding punch acting on a functionally graded piezoelectric strip under non-Fourier heat conduction
- Contact stiffness of regularly patterned multi-asperity interfaces
- Plane contact problem between a rigid punch and a bidirectional functionally graded medium
- Contact mechanics
- Modeling fracture in viscoelastic materials using a modified incremental meshfree RPIM and DIC technique
Cited In (4)
- On the determination of elastic coefficients from indentation experiments
- Material model calibration by indentation, imprint mapping and inverse analysis
- Une approche non destructive pour l'identification de contraintes de contact
- An inversion method for identification of elastoplastic properties for engineering materials from limited spherical indentation measurements
This page was built for publication: Modeling and inverse identification method for the characterization of elastic-plastic contact behavior during flat punch indentation
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2168376)
